Shopping Cart

Your cart is empty.

Your cart is empty.

COMP Cams CL12-206-2 High Energy/Marine 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet Small Block

Free shipping on orders over $29.99

$279.95

$ 99 .00 $99.00

In Stock

1.:1,200-5,200 Rpm Range


2.Size:Cam And Lifter Kit


  • Vans, pickups, 4WD and towing in 350c.i., good idle, strong mid-range torque. Single or dual engine with inboard/outboard drive for ski and economy.
  • 1,200-5,200 RPM Operating Range
  • 212/212 Duration at .050". 110 Degree Lobe Separation Angle. 0.440"/0.440" Valve Lift
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant.
  • High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
  • Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
  • Made in USA


Vans, pickups, 4WD and towing in 350c.i., good idle, strong mid-range torque. Single or dual engine with inboard/outboard drive for ski and economy.


killface
2025-08-31 15:28:23
This cam replaced a 112 LSA cam that was installed in my Chevy 350. My truck is computer controlled, so I can't get to aggressive with cam choice or else it becomes un-tuneable. With the tighter lobe separation of the Comp cam, my truck has more low end torque, revs higher, and idles fair. My vacuum only dropped about 1 inch compared to the old one. Highly recommend! 1994 Chevrolet C2500, RWD, built 5.7L 350, TBI, 4L80E trans w/ 2000 stall torque converter.
MB01
2025-08-06 17:42:42
I love this cam. Will pull 18" of manifold vacuum at idle with the right timing. Sounds very nasty with electric exhaust cutouts. I have a manual 4 speed and 4.10 rear axle gears. This cam provides good low end torque and winds up quickly. Likes cruising at and above 3,000 rpms on the freeway.
Can't Resist
2025-07-21 17:16:13
Been dealing with comp cams for years never a disappointment and someone always ready to help.
Rob
2025-06-08 11:09:10
Worked well with my 87 SBC. Comp makes quality products and best of all they're made in the USA. Doesn't get any better than that. I recommend purchasing additional assembly lube as the packet included is small and leaves little to no room for error.
Richard tokarz
2025-05-19 17:33:25
Badass cam good buy well worth the money
Nicholas D.
2025-05-09 13:20:33
When ordering it stated that it fit my vehicle, a 95 camaro z28. as I go to install everything its all wrong... so as I now go back and read every line in the description, the very least line states it does not fit lt1 or lt4 or engines with roller lifters from 85 to newer... very misleading... and to make matters better, it can't be returned, i received it on June 19 and it is now July 14. Very unsatisfied, waste of money
william church
2025-04-29 16:54:52
parts picture on line are not the same
Onefine40
2025-03-08 15:51:42
This item says in the description that "CL-Kit includes cam, lifters, assembly lube, instructions and decals". It did not include the lube. Not a deal breaker for a quality item, but I always hate that.
alain gallant
2025-02-05 12:45:26
Sounds amazing with a choppy idle . Low vacuum is the only downfall for brake booster .
kyle
2024-12-30 19:25:55
Item is not as described in description. Purchased comp cams 252h as description was specs I was looking for, but actual 252h is smaller cam specs. Didn't notice till after I installed and noticed on box specs. Cannot return
Recommended Products

$134.95

$ 57 .99 $57.99

4.9
Select Option

$124.95

$ 50 .99 $50.99

4.3
Select Option

$30.95

$ 15 .99 $15.99

4.6
Select Option

$640.73

$ 99 .00 $99.00

4.7
Select Option

$339.95

$ 99 .00 $99.00

5.0
Select Option

$18.51

$ 8 .99 $8.99

4.9
Select Option

$119.95

$ 50 .99 $50.99

4.8
Select Option

$286.95

$ 99 .00 $99.00

4.5
Select Option