Your cart is empty.
Your cart is empty.Product Description
THIRD-PARTY TESTED by US Accredited Lab
FTG Maximum Torque 6 Piece All-Same-Size 9/64" (#6 screw) Pro Pack
FTG USA 6 Piece All-Same-Size #6 (9/64") Countersink Drill Bit Set with 1 Depth Stop Collar and 1 Hex Wrench (1/8" Allen Key). Counterbore size 3/8", plug size 3/8"
-
FTG 2331P + 6 Containers
FTG 2331P + 6 Containers
Purchased in Bundle, FTG countersink set + 6 Storage Containers=Cost of FTG countersink set+99 cents
-
FTG 2337P + 6 Containers
STORAGE CONTAINERS available at "Make it a bundle"
Purchased in Bundle, FTG countersink set + 6 Storage Containers=Cost of FTG countersink set+99 cents
-
FTG 4TO12P + 6 Containers
STORAGE CONTAINERS available at "Make it a bundle"
Purchased in Bundle, FTG countersink set + 6 Storage Containers=Cost of FTG countersink set+99 cents
-
FTG 2341P + 6 Containers
STORAGE CONTAINERS available at "Make it a bundle"
Purchased in Bundle, FTG countersink set + 6 Storage Containers=Cost of FTG countersink set+99 cents
-
2331RPL12 + 6 Containers
STORAGE CONTAINERS available at "Make it a bundle"
Purchased in Bundle, FTG countersink set + 6 Storage Containers=Cost of FTG countersink set+99 cents
Steve
2025-08-26 20:19:51
Have used these before and just ordered a few more to set up different tool boxes. Custom cabinet installer and I love the fact that you can adjust your depth. I set them up for different screw sizes and leave them in that box so they are always ready.
Glenn
2025-08-22 17:37:39
No need to overspend. Nice detailed even countersink hole for carpenters that pay attention to detail!
Jonathan K
2025-07-29 10:48:40
Would have preferred a depth collar for each bit, but it's pretty clear that you're only getting one when you order it, so I'm not taking any points off for that. If using on a "gummy" wood (ie, fresh pine), the cutting channels for the countersink will eventually gum up and require cleaning. The depth collar actually makes this worse, as it blocks the cutting channels from being able to self clean. It still works, but takes a bit longer when blocked up. This is not a big deal at all, just wanted to point it out. I feel like there could have been a way to design it so wood doesn't get jammed up under the depth collar. Other than that, these worked great for building a 16x12' raised bed... we probably drilled ~600 holes using two of the 4 bits in new pine dimensional lumber.
Regino rodriguez
2025-06-20 21:04:57
It’s good
LEA
2025-06-19 20:51:52
These are high quality and easily adjustable - coming with two allen wrenches. It takes a bit of a learning curve to make sure you don't fully dislodge the small screws, but once you master that you'll be good to go. I'm not sure who would need so many of these at the same diameter, but If you're doing more than DIY work this could be a good investment on your end.
GreenCountryTables .com
2025-05-31 17:41:45
Review by GREENCOUNTRYTABLES COM - I have used these many many times on great farmhouse furniture. Must have item for woodworkingJESUSLOVESYOU
Danielle M
2025-05-23 17:41:48
I bought these a couple months ago and the first bit I pulled from the pack was spot on. I have been using it for several months and no complaints, probably 90% of the Dewalt bit I broke and was replacing. Fast forward a couple months and that bit gets broke from a drilling being tipped over. Not a big deal, got three more. Two of the bits are not usable, the wobble in the tip is around 3/16" and the best of the 3 remaining is probably still 1/8" of wobble. I have checked them in multiple drills and compared them to longer spade bits, the problem is not with my drills. Either the bits are bent/warped (not sure how considering how brittle this type of bit normally is) or they are just assembled and pinned that poorly. If it was not for a the terrible quality, the bits would be a good value replacement to the more expensive bits like Dewalt.
Kris
2025-05-19 19:44:33
These have worked well for my business hanging cabinets and other odds and ends. I typically can do 30-40 cabinets (2-3 kitchens) before needing a new one. I have not lost a bit in a cabinet yet which has happened with some of the others I have tried. Overall very happy
Edgar
2025-04-03 15:24:13
Son resistentes y practicas de usar
gilles couture
2025-03-22 10:31:40
excellent
art
2025-03-11 10:29:08
the quick change
Jose Luis Ramirez Cervantes
2025-02-14 15:51:18
No me gustó qué es Muy corto la bronca
Customer
2025-02-01 12:03:42
Where do i start...didnt not looke like the product in pictures, the drills were not running true, few of them seemed like they were bent so the tips were running out about 1/8th..starightened it out and tried to drill...and they were dull it took quite a bit of force to get them going and this was only is pine which is quite soft. I do not reccomend. Price may seem good for the quantity but very poor quality.
Recommended Products