Your cart is empty.
Your cart is empty.Product Description
Preston W. Orvis
2025-08-24 12:22:01
I tried for several hours to remove the crankshaft pulley on a Toyota 3.0 V6. Every technique I tried didn't work. I ordered this and ten minutes after unpacking it, the pulley was off.
Excelente
2025-08-05 14:22:31
Excelente
gabriel l.
2025-05-25 12:42:05
I recently used the Rogierra Crankshaft Damper Pulley Holding Tool on a Lexus GS 430, and I’m thoroughly impressed with its performance. I paired it with a proper harmonic balancer socket to remove the harmonic balancer, and instead of relying on my usual impact socket to tighten it down, I decided to give this tool a try with a breaker bar and torque wrench.The tool performed flawlessly, allowing me to apply the correct 181 ft-lbs of torque to the crankshaft bolt with precision. It secured the harmonic balancer perfectly, helping me ensure I followed the proper torque specifications without any issues. The build quality is excellent—durable, well-made, and built to last. The only downside was that I needed assistance to use the tool while I torqued the crankshaft bolt, as I couldn’t do it alone.This is my second Rogierra tool, and once again, I’m impressed with the quality. If you need a reliable harmonic damper pulley holder for your Toyota or Lexus engine, I highly recommend this tool. It delivers the performance and accuracy required for the job!
rleahy
2025-04-05 10:20:17
Good quality tool and way cheaper than factory specialty tool . Enables you to loosen crank pulley bolt but more importantly it’s locks crank pulley when you need to torque pulley bolt to 181ftlbs.
Killbottun
2025-02-21 16:40:04
Very simple tool, but invaluable in breaking loose the crank pully bolt that's at 230 something foot pounds on a Toyota 2JZ with hand tools. The included bolts (M8 I believe) fit the pulley holes perfectly, holds the tool securely and the tool takes a 1/2in drive breaker bar. Made loosening the crank bolt painless without having to resort to sketchy hacks like bump starting a wedged breaker bar. Just use something like the floor jack handle for leverage and crack at it. If you're gonna do it yourself, do it right, get the right tools.
William
2024-12-14 17:27:21
Got recommended this product via a YouTube video saying this tool makes breaking the crank bolts loose on a 2JZ a breeze, and boy they weren't wrong.If you don't know how this tool works, let me explain.This tool mounts to your crank pulley/harmonic balancer via 2 bolts with washers, you then connect a 1/2 drive breaker bar to it. The inner diameter allows for your socket to fit inside it and slide onto the crank bolt. You then put your breaker bar up against the frame of the vehicle like I did, or push against it while also using another breaker bar to break the bolt loose.I used this tool and wedged by breaker bar into the frame and I broke my crank bolt loose with ease! I was able to complete the Job in 2 hours by myself. Definitely a must have if you're working on a 2JZ!
James Jordan
2024-11-13 10:04:54
I have the engine out the car so it's easier. With long enough extension and jack stands I know I can do with it in car. If I have too Ill update the pictures.
Recommended Products
$21.95
$ 9 .99 $9.99
$19.95
$ 8 .99 $8.99