Your cart is empty.
Your cart is empty.Product Description
- We are a company and mainly engaged in production of computer hardware.
- The all-black design concept and simple product shape are what the DARKROCK brand has been pursuing.
- Our goal is to make high-quality products that satisfy consumers.
DARKROCK PX-4 Cpu Air Cooler
Efficient cooling performance
The DARKROCK PX4 CPU air cooler is perfect for keeping your computer's temperatures under control. With its sleek design and effective cooling capabilities, you can enjoy high-end gaming and encoding without any interruptions. The cooler features a compact size for easy installation and a quiet operation that won't disturb your workspace. Its aluminum heat sink and copper base offer optimal heat dissipation for excellent performance.
- 4 heat pipes design with good thermal conductivity.
- Max. 180W TDP provides better cooling
- Low noise level of Max. 22.3dBA mean you can use conputer with a quite environment.
- 1800W rated RPM enable the fan to blow out stronger wind.
100% Ram Clearance
Asymmetrical heat pipe design provides RAM compatibility and clearance across various platforms.
120mm pwm Silent Fan
The radiator is equipped with a 120mm PWM fan, using hydraulic bearings, which can prolong the service life. MAX.noise level is 22.3dBA, which means you can use it in a quiet environment.
AM5 and LGA 1851 Support
Compatibility: The CPU cooler Socket supports: Intel:115X/1200/1700/1851 AMD: AM4, AM5; For different CPU socket platforms, corresponding mounting plate or fastener parts are provided
Suitable for Most Chassis
The radiator standing 152mm tall suits most ATX/ M-ATX case and 120mm width without blocking RAM slots, check the CPU height limitation of PC case before buying is strongly recommended.
Copper Base
Pure copper base enables the most efficient heat absorption and transfer.
Better Heat Dissipation
The CPU cooler is equipped with 4 copper heat pipes, which increase the heat conduction performance and ensure good heat dissipation of the CPU.
Shuja Hadir
2025-09-01 16:27:13
This product has a very quality feel. It runs efficiently and quietly. I use a MSI motherboard and had no issues with setting it up. It keeps my pc very cool and the vertical fitting design is much better than the horizontal one in my opinion. It takes up about as much space as a regular rgb fan. But again, I cannot stress enough the quality of this thing. Definitely recommended.
TechGuru
2025-08-02 09:57:29
I was surprised by the quality of the air fins., Unlike other brands, the fins were not sharp (as in cut your fingers sharp) It also does a good job cooling, considering you are building with CPUs that run at 65w ratings and not 125w.I decided to try this cooler because it was on sale at a crazy low price compared to the main brand that I normally buy. And I also understood that the cooler only has a regular black fan. For anyone who is considering this cooler, the black fan is an aesthetic decision. You can also replace the black fan with any fan, even aRGB, because it uses the standard springs to hold it place.Mounting the block was a bit more complex that the other brands I usually buy. I quickly learned that to get the cooler block (the tower part) to align with the 2 mount base screws (these are built onto the metal bar scaffolds) I had to leave the 4 mount post scaffold screws screwed down but untightened, so once I screwed down the two cooler block nut heads, the scaffold screws were in their proper position.The above confusion is because the holes in the scaffolds are not individually drilled, and the scaffolds can 'drift.' Note that I never had these issues with other manufacturers of similar cooling towers.Although I gave this cooler an excellent rating, I would NOT buy this model again unless it was on sale at a similar super low price.
Derek Boyles
2025-07-26 10:22:27
Ok, let's be honest...this is an absolute insane deal for a CPU cooler. Does it perform as good as something that costs 3-4 times as much? No, it doesn't but it's still so much better than a stock AMD cooler that comes with previous generation Ryzen 3 and Ryzen 5 series CPU's.I built a PC for my nephew using an AMD Ryzen 5 3600 CPU and I was forced to use the stock AMD wraith stealth cooler that came with it. Then I came across this cooler a few months ago and I was astonished at how cheap it was. I wanted to give it some time and wait for some reviews to be submitted before I ultimately decided to purchase it. After seeing some YouTubers review it, I decided to save up some money (all $17) and just buy it.Here's my thoughts so far:- Aluminum heatsink fins do seem a bit flimsy and you have to be very careful when installing to not accidentally bend one of them.- I like how it included an extra set of clips in case you wanted to get a second fan to stick on the other side of the heatsink. Making this cooler a dual fan solution might be a good experiment in the future.- The temps did change considerably after installation. Not only did the CPU temps decrease by 10-12 degrees at load but the ambient temps in the case changed as well since this cooler helps push air out of the case.- It's honestly not that loud under load. I may even under-volt the CPU a bit to make it even quieter!- I am noticing more and more cheap alternatives to this product but I went with this one because I really liked the all black design.
anonymous1
2025-06-21 14:59:34
This is a great single tower cpu cooler especially if you are going for an all black aesthetic! It’s only 4 heat pipes single stack with one pwm 120mm fan so it fits in the same range of cpu cooling abilities as the rest of them. For gaming it can cool higher end cpus, but if you do cpu taxing tasks you probably will want a beefier cooler for 100w plus cpus. But for all lower and mid tier cpus like 65w TDP this is great! And like I said, gaming doesn’t push cpus like a stress test so it can handle 105 to 120w rated cpus for gaming. The design is great for making sure you have plenty of ram clearance. The fan seems very well built with solid rubber pads and mounting was simple. I’ll use it on a AMD 5600x comparing to the stock wraith cooler but won’t have data till next week, so I’ll post an update. So far so good though and looks great!UPDATE: I was able to run a thermal test with this cooler today. Using a Ryzen 5 5600x cpu and the CPUID software, I ran a 3 minute 100% cpu stress test. With the stock AMD wraith cooler that it came with it got up to 78 degrees and was still rising slowly. After replacing it with the Darkrock PX4 it only got up to 61C and was leveled off. (Used the same thermal paste Arctic MX4) Also the glass of my pc case is noticeably cooler to the touch after gaming sessions (high settings high fps 1440p with RTX 3070). It just does a better job cooling the cpu and pushing the hot air out the back of the case instead of just spreading it all around the case like those stock AMD coolers. Great for this cpu!
Haig Karakashian
2025-06-07 21:36:40
This cooler is exactly what it looks like, it's cheap, but functional. And it has a nice blackout aesthetic to it, no exposed copper and aluminum. The performance is decent, and is good for an upgrade over a stock cooler.The heatsink sits offset from the CPU cold plate, so you'll want to install it such that the fan is above your RAM. If you want to install it the other way for some reason, I foresee RAM clearance being an issue.Installation was my only pain point, the instructions seemed clear at first, but getting into it, it was harder to install than expected. Bags were mislabeled for what socket they were supposed to be for. Parts didn't fit snuggly enough which made it a bit harder to install. But once everything was in place, it works well.It's not unexpected, but I'm still happy that it included extra fan clips. I had another fan from a previous cooler that I was able to attach and improve performance. Because of the clearance I mentioned above, I needed to offset the fan off of the heatsink a little bit to not hit the RAM, no big deal though.
Jason
2025-04-19 20:24:01
I had a cryorig cooler before, installed this and reduced temp by 10 degrees, great cooler for a budget price
Slick
2024-12-13 11:26:07
OK, for the price the quality seems good. I bought this air cooler for the AMD 5 7500F CPU. It came with a tube of thermal paste and accessories for AMD and Intel chipset. I had to change and fix mounting brackets before screwing the unit to the brackets. However, not sure if it was the motherboard but once I fixed the mounting brackets I couldn't screw the cooler over the CPU. Due to a slight tolerance and the thumb turn screws were so tight, I just couldn't get both screws to lock into place. I had to take one mounting bracket off and fix it to the cooler and then fix the mounting bracket to the motherboard which was very fiddly, hence the 4 star review. Hopefully, it doesn't come loose and fall off......fingers crossed!
Recommended Products