Your cart is empty.
Your cart is empty. Application:
Professional tool for commercial or occasional use
For refilling radiators with coolant without producing air locks
Eliminates need for bleeding and purging system to eliminate air pockets.
Simply plug into the workshop airline, attach to the cooling system heater tank and create a vacuum
Dramatically reduces cooling system refill time without mess and without introducing air-locks
Features:
-Professional tool for commercial or occasional use
-Refill entire cooling system quickly
-Eliminates need for bleeding and purging system to eliminate air pockets.
-Universal adapter for use on most car and light truck radiators
-For refilling radiators with coolant without producing air locks
-Dramatically reduces cooling system refill time without mess and without introducing air-locks
-Simply plug into the workshop airline, attach to the cooling system heater tank and create a vacuum
-Air pressure – 90psi
-Air consumption – 12cfm fluid hose length 900mm
-Air inlet size ¼ BSP
Package includes:
1pc Vacuum purge and refill tool
1pc Universal radiator adaptor
2pcs Coolant hoses
1pc Stainless hook
Batman
2025-09-04 11:40:38
Works perfectly. Every shop should have one
Keith Stewart
2025-08-26 15:32:15
It worked a little bit, but then fell apart
EDGAR
2025-08-20 16:55:43
The good :Looks goodVery aforableThe bad:Leacks from every fittingCant plug into a normal 1/4 compressor fittingWhy i keep it??Add teflon tape to all the treads (fittings)Remplace the fitting for the compressor hoseAnd after that works like a champIf you are on a budget this will do the trickIf you are a mechanich just get a better one
dustin
2025-08-10 13:04:46
Fitting shown in the listing is NOT the fitting that comes on the unit! Purchased this solely because it showed the correct fitting, now its useless for me and I have to buy one locally because I can't wait another 3+ days to finish my car. This was an absolute waste of time and money.
Customer
2025-08-03 17:34:01
You need to know how to use the equipment. The instructions are not complete. Not unusual for a Chinese made instruction sheet. The rubber cone does not fit all radiator necks because of the neck design.
Robert
2025-07-21 18:14:39
It doesn't hold vacuum for more than a second and and the guage is incorrect very disappointed in product sent a request to seller and no response don't buy
rhonda
2025-06-12 15:31:53
I typically don't leave reviews, no news from me is good news.Like others, it took 20 minutes to get it to stop leaking, teflon tape... My other issue, metal fittings screwed into plastic housings in numerous places, what can possible go wrong with that! Setup directions were lacking, steps 1 OK, Step 2 OK (Skips step 3) then Step 4.... Not sure that I ever did get it to work, had to block of a tube to get it to pull vacuum. As my Daddy always told me, Boy I say Boy (he lover to quote Foghorn Leghorn) , you get what you pay for!!!!
Tee
2025-06-11 15:13:57
Too much plastic when metal should have been used. Weak joints, and vacuum leaks.Poor design of venturi renders low vacuum with specified air pressure and flowrate.
Laylow
2025-04-21 16:30:16
I bought this to refill my Audi A4 Quattro. This vehicle requires a vacuum pump in order to refill the coolant reservoir and the whole system in this unit worked like a charm. I bought another one that did not hold the vacuum. This one holds the vacuum nice and tight, and it held it for at least an hour
Giuseppe
2025-03-30 10:07:32
Acquistato tramite Amazon warehouse, purtroppo il manometro era danneggiato nonostante non presentasse segni di urti o usura. Mi è sembrato un po' economico come attrezzo, anche le istruzioni mi sono sembrate un po' superficiali. Comoda la valigetta. Consiglio di testare il funzionamento del prodotto su taniche di plastica vuote, così da assicurarsi che il manometro funzioni e che non abbia difetti. Lascio 3 stelle perché al mio prodotto non funzionava il manometro ma sono riuscito comunque a creare il vuoto. Il pericolo di un manometro guasto è quello di creare una depressione troppo forte nell'impianto di raffreddamento che può provocare danni alla tenuta delle guarnizioni.
Maier Albrecht
2025-03-23 15:19:46
Alles Top Gute Ware , Schnelle Lieferung,
IDP
2025-03-08 15:45:44
Good piece of kit for the money. Used it yesterday for the first time and it worked very well. Before it’s taken 3 or 4 times to get all the air out of the system and get heat from the heater. This time it all worked first time. You know it’s worked as all the coolant you drained goes back in.
Pedro Arboledas
2025-02-13 20:03:11
Una herramienta genial para rellenar el lÃquido refrigerante de cualquier vehÃculo rápido y sin necesidad de pulgar el circuito ya que al hacerlo por vacÃo no queda aire en el circuito. Me alegro de haberla comprado. Pero le pongo 4 estrellas porque tuve que comprar el acople rápido Europeo ya que trae el americano
Recommended Products
