Your cart is empty.
Your cart is empty.Product Description
The DEWALT DNP618 Edge Guide for Fixed Base Compact quickly attaches to fixed base compact routers. It allows for precise positioning of inlays, dadoes, etc. It extends up to 3-Inch from edge of material. Easy slide and lock positioning adjustment. All steel construction for durability
From the Manufacturer
The DEWALT DNP618 Edge Guide for Fixed Base Compact quickly attaches to fixed base compact routers. It allows for precise positioning of inlays, dadoes, etc. It extends up to 3-Inch from edge of material. Easy slide and lock positioning adjustment. All steel construction for durability
Tool Driver
2025-08-19 14:56:59
This is used with the 20 volt DeWalt router fixed base!It uses two screws to attach it to the base.When done using the guide you remove the screws from the guide/router base and then screw the two screws back into their original holes on the guide!Very simple and easy to keep track of the screws!Easy to adjust distance and keeps its setting while you rout! Highly recommended!
Dave M
2025-08-18 10:02:32
Tool worked great. Made job much easier with better results.Used this to removed cabinet door panels with my router and put plexiglass in its place.
photog1514
2025-08-17 14:59:08
I was looking for some V-groove tongue-and-groove pine with a V-groove on both sides. Since I couldn't find any locally, figured I'd get the single-sided V-groove boards and route my own V-groove on the backside, so purchased this edge guide to help with that. The guide installs very easily on either the corded or cordless trim router with two machine screws (included), and no need to remove the router's base plate. The edge guide, once set to the needed width, is held securely in place...I didn't notice any slop or wobble when sliding along the length of the 100" long boards. One thing I would recommend...attach a piece of scrap wood to the face of the guides...this would help prevent the guide from turning once the leading edge of the guide passes the end of the workpiece (small gap between the leading and trailing faces of the guide). I'd recommend using a piece of MDF since the faces are fairly slick and would slide easily along the workpiece.
CHTX
2025-08-14 13:44:25
I use this with my Dewalt DCW600 cordless router and it fits and works perfectly. It is easy to install and remove, and is made with high quality materials. I am very pleased with this edge guide.
Daniel J. Walcott
2025-08-03 17:37:26
Great for those times I need an edge guide and don't have a router table. Easy on and off.
Swamp Rat
2025-07-29 11:20:13
It works well as long as you are patient with making sure to keep contact with edge while cutting groves or channels.
Barry Rush
2025-07-17 12:15:19
Easy to use
Jim
2025-07-01 19:12:50
ðŸ‘ðŸ¼
Jessica King
2025-06-29 15:14:58
Great piece of kit fits my fixed base as well as my plunge base. Does have just a tiny bit of slop where the two pieces come together but I’ve not noticed it being an issue.
Nicholas Goursky
2025-06-19 14:58:45
This guide was easy to set up and adjust. It maintained its setting during use without slipping or racking. Fit the router perfectly. Not fancy, but very useful.
Pac1
2025-04-24 13:16:57
all good
Ib
2025-03-23 15:55:40
لا شيء مميز، سعر ممتاز Ùˆ جودة Øلوة بس انتبه يتقشر بسرعة خصوصاً المسطرة
JOAO MORAES
2025-01-30 15:55:10
muito pratico e bem funcional, e o mais importante ele serve na base fixa e na base de coluna, gostei da aquisição.
Recommended Products
