Your cart is empty.
Your cart is empty.Product Description
Ronald Bianchi
2025-09-03 16:24:06
So I needed to remove the tint off my front windshield. The last time I did the sides I tore the tint off and there was 2 hrs of removing glue. I sorted thru and found this heat gun and gave it a try.This gun is a little larger than others, but that ok because it has a nice grip. 2 speeds and the adjustable heat setting, big plus. I fired it up and started in the right corner of my windshield and after 2 mins was able to peel the tint off WITHOUT leaving the glue on the windshield. Took about 45 mins and it worked great, little sections at a time and it heated the paper real fast (it was below 32 degrees out).This a a great heat gun and does the job of the $100 + guns. For the money, it's a really nice product and i wouldn't hesitate to buy again.
Matthew Deremer
2025-08-03 21:40:23
Always wanted a nice heat gun, now I have one.I have used it for many projects including setting brake caliper paint, still working great.
Dixon Elder
2025-07-28 12:27:40
This looks and feels like a quality engineered design.Fully functional.Even the included illustrated instruction manual is informative and is easily grokked and not full of the usual sophomoric leagal safety blather but provides in fact useful information.
Sundowner
2025-07-15 20:13:41
I'm not an expert in drying tech, so consider this a layman's opinion. I needed a heat gun to apply heat to a cell phone and loosen the glue holding the back of the phone on. If you check the Internet you'll see all kinds of videos from kids that do this sort of do-it-yourself repair on their devices. It beats paying to upgrade when you don't want to, and I like the idea of not giving into the phone companies that have decided they're not going to make it easy to keep your existing phone.Anyway, since it was my first time doing this I went really slowly and started at the lowest heat setting. I like that this device comes with a dial to modify the heat level. The rocker switch in the handle also lets you choose between to speeds of air.Yes, it's sort of a glorified hair dryer, but I'll take it and not have to bug family members to borrow their items. Anyway, the project was successful; I was able to heat up the phone safely and eventually pry off the back and replace the battery.If I had any concern, it was that the documentation claims the heat gun goes from 112 F at the low dial setting and low speed fan and escalates from there. Supposedly this starting temp is sufficient to restore viscosity to the glue. But I found I had to raise the dial to about 4 before the back of the phone started loosening up enough for me to get a pry tool into it. It would indicate this heat gun may not be quite as strong as advertised, but it does work and probably would be sufficient for most purposes. It was also very affordable so I plan to keep it.
sid hall
2025-06-04 13:38:39
I use this a lot and it works great
Denis
2025-05-30 12:50:01
My new Kydex holster was almost perfect, but my pistol was just a bit too tight in it, so I needed to heat up the Kydex so that I could loosen the fit. I tried my sister's hair dryer, and it kinda-sorta worked, but it took ages & really didn't get hot enough. So I got this great heat gun!It has two blower settings, a heat adjustment dial, and it'll stand upright on its base (so the hot air is going directly up vertically.) It also came with a set of baffles to direct the air for special uses, like stripping paint & some other things. I started off with the heat adjustment at half-way, "5," and on the low setting for the blower. It got hot straight away, and my Kydex holster was bendable in just a couple of minutes!Since then I've found a number of other uses for it. There are lots of things that just need a bit of heat to get them working, like the rusted-on adjustment ring on an old rifle scope I had. I'd put on plenty of penetrating oil, but I just couldn't get it to move; until I heated it up gently with the heat gun. Then, using gloves (of course, it gets hot) I found that the old rusted ring came loose right away! In that case I had to be very careful, I didn't want to ruin the scope by overheating it, so I went down to "3" on the heat gun and took my time.So far I'm delighted with this heat gun, and I highly recommend it to anyone who needs a little hot air (and doesn't have a politician handy!)
tee
2025-04-15 10:34:31
Ibwas skeptical in the quality with the price being so cheap. I've had this heat gun for several months now and it performs as good as my expensive one. ðŸ‘
Pat dolan
2025-03-30 10:28:55
Gets very hot with good temp control.
S & E
2025-03-22 17:47:23
The heat gun is great to use , however it is bulky hard to get into tight spots, it works well taking paint off stair rails and spindels , i would look for one a little smaller next time, this heat gun is still a good buy
Al
2025-02-02 14:20:51
I haven’t used it but have couple projects coming up that I need it.
Tisa M.
2025-01-24 13:55:45
It’s ADJUSTABLE!!
Client d'
2025-01-23 10:58:07
tres bien
Customer
2025-01-16 16:09:58
Great heat gun at a resonable price. Works good. Stands up nice on table,has rotating cord in bottom of handle so makes movement easy. Only small issue with temp dial. Its Inset abit so hard to change heat setting with gloves on. But no biggie. Usually no gloves. Nice heat gun.
Recommended Products
$137.35
$ 64 .99 $64.99