Your cart is empty.
Your cart is empty.Product Description
NTC waterproof sensor probes
Specification:
- Power Supply: 120Vac±10% 50/60Hz
- Temperature control range: -58~212°F /-50°C~99°C
- Difference Set Value: 1~50°F
- Accuracy: ±1 °F
- Output: Two replay (Cool & Heat: 10A/250VAC)
- Size: 75mm(L)*34mm(W)*85mm(D)
- Mounting size: 71(L)*29(W)mm
- Consumption: ≤3W
This temp controller 120v features ABS material for safe use and 2m NTC 10K temperature probes. waterproof sensor, which is professionally waterproof that can be placed in the water for a long time, longer service life than metal probes.
Kindly note:
- This temperature controller itself doesn't change temp. It's on/off control mode.
- There is no voltage output directly, you need to connect additional power supply for the load.
- Please kindly note no outlets, wiring needed
KETOTEK KT1000 Digital Temperature Controller 120VAC 10A
This thermostat switch 120v with relay is widely used in aquariums, fish machines, aquacultures, hatcheries, terrariums, vivariums, paludariums, incubation systems, greenhouses, breweries, freezers, water tanks, refrigerators, industrial refrigerators, steamers, industrial plants and other temperature control applications.
Cletus Runswithscissorsguy
2025-09-04 14:43:23
I used this for a failed thermostat on a 1953 Frigidaire refrigerator. It is accurate and does the job at an extremely low cost. I only use the 'cool' side of the heat/cool relay set, but after initial setup it has worked flawlessly for a few months. It has also reduced the running cost by keeping a narrower temperature window.It took a few tries to get it set up, but after that I have not touched it. Wiring it into your system is pretty straight forward, I am also running an auxiliary fan to help cool the compressor. I bought one as a spare, and bought another to install on my 1946 GE refrigerator also.So obviously I would buy again.
Jill De Foe
2025-08-23 15:26:53
This controller works as advertised as tested accurate. Good for my application.
Mary
2025-08-11 15:32:59
It works well. The instructions to wire it are not very clear, but I was able figure out how to wire a fan to it from YouTube videos of similar controllers. The instructions on how to operate it were clear and understandable. It would help if they would include actual pictures of it wired or produce a YouTube video. I would purchase again.
Rod
2025-08-07 12:42:34
When I first received this product I was a little disappointed with the included documentation. The instructions looked to be a photocopy of a photocopy and was hard to read and understand. After my sous vide system failed to work properly, I reached out to Ketotek for help. They were VERY helpful and ended up helping me figure out why the relay would not close when desired. I now have a working system that keep temperature to about +/- .2 Celsius which is good enough for my needs. Overall a great budget controller.
Lohra
2025-07-28 12:41:47
This is a flimsy product with inadequate instructions. The terminals are fragile and do not hold the wires tight--the wires slip out. A dangerous product in that sense! Not plug and play. You have to wire up what could have come pre-wired. Want to plug your little 200 watt heater into it--well you'll have to butcher the heater's cable--and then it still won't work, and who knows why since the instructions are vague and written in China. Sending it straight back!
Mr Nomad
2025-06-06 14:35:04
The internal relay no longer turned off after just 3 days of use. The unit was stuck in the ON mode. My guess is the claim to handle a 10amp load is not accurate. My load was 7 amps for the surge and 1 amp thereafter. If u r going to use this device, add a heavy duty relay to handle the load.
John Hopper
2025-05-28 09:04:23
Did what it was supposed to
Vic. Romero
2025-05-26 13:54:26
Tiene buen funcionamiento, no me ha fallado, es presiso, solo la temperatura tiene una diferencia de casi un grado. Si lo recomiendo. Conecte lo como lo recomienda el manual. Yo lo use para una incubadora.
T. Edwards
2025-02-22 16:43:00
Great for homebrew
Manu
2025-02-11 14:18:42
Das Teil macht sehr gut, was es soll. Der Einbau ist sehr einfach. Wäre eine Beschreibung in Deutsch dabei oder eine logische in englisch, dann wären es 5 Sterne.
Recommended Products
$20.98
$ 10 .99 $10.99