Your cart is empty.
Your cart is empty. Specification:
1. 2.4G wireless DMX512 R / T
2.Work voltage: AC100-240V
3.Receive Sensitivity: -94dBm
4.Max transmitting power rate: 20dBm
5.DMX connector: 3pin male
6.Communication distance: 400M (visible distance)
7.Work frequency section: 2.4G ISM, 126 channels.frequency section
8.7 groups ID code settable,User can use 7 groups individual wireless net without any interfere. 9.Material: zinc alloy + plastic
10.DMX wireless transmitter size: L8.2 * W0.7 * H0.7in
12.DMX wireless received size: L3.1 * W0.7 * H0.7in
12.Package weight: 3.3lb
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.
2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.
4. Communication was established correctly.
Package list:
1 x DMX wireless transmitter(US Plug)
7x DMX wireless receivers(US Plug)
8x Adapter
1 x Specification
Customer
2025-09-04 12:06:22
These work really great. I am a mobile DJ and these have allowed me to do some really creative light setups which would have been impossible or require tons of cabling. It was pretty much plug and plug, they just work. One minor complaint, the location of the power supply plug-in on these receivers blocks the use of the DMX out port on several of my lights. Sort of like how a wall wart will use up 2 spaces in a power strip... These take up a little too much space and block plugging a cable into the DMX out... I think this could be avoided by changing the location where the power plug is. My solution is to use a short DMX cable as an extension
Russell Glenn
2025-08-20 14:59:00
Work for me. No issues with connectivity
Xpansion
2025-08-11 12:14:21
My band purchased a different set of wireless DMX transmitter/receivers on Prime Days back in 2020. While initially we were very happy with that product, they did not weather wear and tear well, PLUS it was very difficult to 'see' the LED lights for good/bad connection to troubleshoot if problems arose after raising the light bars into performance position. These are built better, the power supply 'footprint' is smaller for the included wall-warts and the giant LED's that indicate good/badd connectivity is amazing. Two shows in and we are extremely pleased. The only reason I marked it down for beginners has nothing to do with this product. DMX lighting in general is not a 'beginner' topic and certainly not adding wireless to it.
James D Pfautz
2025-07-18 11:09:20
I’ve bought dozens from these and they never disappoint. Compared to competitive brands you can’t beat the price and quality comparison when side by side.The added benefit of changing protocol easily with color coding is helpful with working on two separate systems on different floors. Also working in additional dmx universes.A+ will always buy thesePlease note* do not use when running a matrix led panel. You will experience latency. I suggest running an Ethernet cable to a dmx ttl or dmx node.
B philip
2025-07-04 13:53:44
The picture on the listing shows a light can with the light power socket on the top and the DMX socket at the bottom. If your fixture is like this OR if the power socket is on the RIGHTSIDE of the DMX socket - then this might work for you.In my case - the light power socket was to the LEFT of the DMX socket.This DMX receiver needs its own power supply that plugs to the left of the receiver. Once you plug that , I was not able to connect the light power socket to the fixture. its one or the other.
Sergio
2025-06-06 12:45:55
Fácil instalación, conexión super rápida. Excelente producto
Israel Demello
2025-05-09 15:49:07
These work decent but need to be plugged in which suck.
Tim
2025-02-10 17:10:37
I've been using the Chinly dmx products for a year. I did have one of the transmitters stopped working, but they were quick to answer and replace it. For the product itself. It seems to have good connectivity during my events.
Recommended Products
$14.99
$ 7 .99 $7.99