Your cart is empty.
Your cart is empty.Product Description
Black Silent Door Roller Catch with Screws
Heavy Duty Solid Brass Silent Door Roller Catch with Square Strike-Satin Black.
This Door Roller Catch with Premium Quality. The parts are made by die casting zinc alloy, the thickness is about 3/16", then make them polishing with smooth surface. Last, they will be powder coated satin black finish. Packed by single bag, then to box.
Each Parts of the Door Roller Catch
The Face Strike Plates
The face strike plates are made by high quality Zinc Alloy, with smooth surface, and satin black powder coating.
The Roller
The roller is made by high quality black Nylon. The core is Brass.
The Spring
The spring is made high quality 65mn material. Very heavy.
Door Roller Catch Application
Satin Black Finish is popular and beautiful for the indoor doors!
D851D
2025-09-01 13:04:26
Replaced 2 sliding closet doors for our mechanical closet with regular doors so it's easier to perform maintenance. Used some plastic catches from the orange big box hardware store. 3 out of 3 purchased broke. 2 during installation. One lasted about 3 weeks. They were cheap and this was reflected in their quality.These took a little more work to install but work very nicely.
cross_wings_wood
2025-08-01 13:34:07
Saw this roller latch first on a neighbor’s front door. Really liked the concept so I bought one for a new door we were having built. First, the install is really elegant looking since there's no visible door latch. Second, you can adjust the height of the spring loaded roller to set the amount of grip. Seems sturdy, good quality … highly recommend.
LATOYA
2025-06-22 13:25:39
I purchased these for my entry doors that has push/pull handles installed on them. I needed to be able to keep the door closed without having to use the dead bolt. I ordered two pairs and one set had adjustment screws that were milled incorrectly rendering the item unusable as the screw wasn’t able to adjust the ball level. I was initially disappointed…until my very lovely experience dealing with the sellers who were extremely professional and prompt with communication. They immediately offered to have the damaged item refunded. All the other ball catches worked well from the box and appeared well made and of strong heavy material. Very honest sellers, I would recommend.
steve roberts
2025-06-02 10:39:41
This was delivered as promised and fine quality my customer loved it.
W.A. Smith
2025-04-29 10:37:42
I got this for a heavy front door that a ball catch was not able to hold closed. It works great and was easy to install. Highly recommended.
Jayme Smith
2025-04-28 12:45:55
No complaints!! Worked great for our door!
marina
2025-04-10 13:43:05
This is a heavy duty, solid brass door roller catch. It's very good quality and heavy. It's perfect for closet doors and is fairly easy to install, just have to cut away enough material for this to fit flush because it is a bit thicker than expected
KL
2025-02-03 17:43:31
This is a very well made item. Solidly constructed. Couple things to know -- 1. this is for up/down installation. If you need to flat mount this on a cabinet door to roll latch on the ledge and you can only install at 90 degrees, don't bother, it isn't designed that way. It cannot be adapted to that either. So if you mount this in one direction the other side has to be mounted in the exact opposite direction (ie. the screw heads should mirror each other). 2. The roller is plastic, so it's very quiet, but it doesn't quite lock like the cement ones. It's still good, but those cement ones have a real locking feel. Expensive item so if you buy a lot try and buy in bulk.
Customer
2025-01-24 10:07:06
Can adjust easily for what holding strength is required
Recommended Products