Your cart is empty.
Your cart is empty. Family:Hydraulic Magnetic Circuit Breaker
Voltage:125/250/277/415; 65/80 Vdc
Rated Current: 30A
Mounting:Rear Mounted,
Operating Temperature:-40oC (-40oF) to 85oC (185oF)
Interrupt Capacity:
5,000A (PC1)
3,000A @ 250 Vac (SC)
1,000A @ 415 Vac (SC)
2,000A @ 80 Vdc (SC)
RoHS:Y
Regulatory Sepcification:cUL1077; EN60934; EN60947; DIN; CE
Technical Specification
Temperature : -40 C to +85 C
Shock : 50G, 11ms or 100G, 6ms
Vibration : 10 to 500 Hz. 10G(1.6 mm to 50 Hz)
Life : 10,000 Switching opearation with 6,000 at rate current
Approximate weight: 1P-85g
Dielectric Streight: 2,500 Vac 50 / 60 Hz
Rated Current: 1-100A according requirement
Torgue Allowed for inserts screw : M3 / 6-32 (0.6'0.8 Nm)
Package:
1pcs Double Pole Hydraulic Magnetic Circuit Breakers
Jason richardson
2025-07-17 15:31:38
Works well
Andy Ortiz
2025-06-30 18:52:37
No problem at all
PT6Driver
2025-05-19 16:46:01
Tested the fuse and it checks all the boxes. Just be aware it comes WITHOUT mounting screws.
wilton soileau
2025-05-16 09:11:48
The small 6mm screws were short and hard to find at the big box stores
JPB
2025-04-25 20:48:02
The circuit breaker on my 3500 watt generator failed. It was a 23 amp breaker and is very difficult to source and impossible to find outside of the Honda supply chain. And since it is only available from Honda the price was right around $50.00.So I started my search and had to downgrade the current rating to find a non OEM replacement. This Tocas circuit breaker came closet in current rating and size that I could find and it worked out perfect for this purposeAfter installing I put a 17 amp load on the Generator and the breakor did not trip, I then put a 28 amp load on the generator and this breaker tripped as expected.The Item arrived properly packaged, was not damaged, came with all of the expected hardware and it functioned properly. you cannot ask for more than that, Oh yeah, this breaker was less than a third of the cost of the OEM part.
Dalzell Venable
2025-04-23 11:25:14
I do electric bicycle builds, some systems are hot so to free worry of blowing a 20 amp fuse i started using this type breaker. the 80 volt capacity 20 amp magnetic switch is real compact, i use a travel kit Q tip box for my breaker box ; ) real plus is that it is an easy to wire system single post so it works great inline from the battery to motor controller on my bike, and double plus I no longer need to carry fuses. it is made well and operates flawlessly. I lot of the electrical I have used in the past could not handle 36 volt much less 80 volt this does and it feeds my 1000 watt direct drive rear hub motor all it wants and never burped once. Best fight to win is the short one, this is a K O !
James
2025-04-08 17:05:41
perfect for the generator fix
Unknown
2025-03-18 11:50:24
Ordered it , exactly as advertised, was delivered very quickly!
Balwan
2025-01-22 13:31:26
Works well. Good replacement for the more expensive brands
Recommended Products
