Your cart is empty.
Your cart is empty.Product Description
FS-i6X 10-Channel RC Transmitter and FS-iA10B Receiver
The FS-I6X and FS-iA10B connect so well that you do not need to make new connections when you receive them.
In normal use, there is no need to connect the "bundle cable".
If bonding with other FS-iA10B receivers, you can do the following.
1, Connect the included binding cable to the receiver's B/VCC port.
2, Plug the DC 4V-6.5V power supply into other ports, the positive and negative poles cannot be wrongly connected.
3, Keep pressing the "BIND KEY", and then turn on the transmitter to enter the binding mode.
4, The transmitter will display the RX voltage, that means the binding is successful.
5, Remove binding wire, Check the operation of the servos. If something doesn't work as expected, start this process from the beginning.
>
DTXMX Flysky FS-i6X is a transmitter built for fixed-wing / glider / helicopter models. Can also support RC Quadcopter/Car/Boat, even if these icons are not in the menu. It features the AFHDS2A and AFHDS protocol, support for up to 10 Channels through DIY upgrades, and is compatible with many ST*** RC Simulators via USB. [RC simulator software purchased separately]
>
Supports 10-channel and auxiliary channel customization
10-Channel Auxiliary switches On
Press the 'OK' button for 2 seconds to enter the menu.
[System setup-Aux switches],
set SwA SwB SwC SwD to On, Ch:10,
then press 'CANCH' button for 2 seconds to save.
Auxiliary channels customization
Press the OK button for 2 seconds to enter the menu,
[Functions setup-Aux. channels],
Assigning the switches to the channels,
Then press the 'CANCH' button for 2 seconds to save.
Channel display
10 Channel auxiliary switch On, auxiliary channel customization, after saving the settings.
In the Channel display you can see the Servo volume status bar
Package Included:
1X FS-i6X Transmitter
1X FS-iA10B Receiver
1X Bind plug
1X Upgrade Cable
* Delivered without batteries
Midwest Hacker
2025-09-04 13:20:29
For over 50 years, I have had some sort of R/C controller in my hands but maybe only two to three times a month. Therefore, I won't spend for the high-end stuff. I never would have believed how far the hobby would come or see prices this low. I will also note that I am now 3D printing construction equipment like excavators, dozers, and front end loaders. scale is roughly 1/14th and I use a twin stick radio in self centering dual stick mode. I haven't flown a plane in many years but could with the radios that are made now with switchable mode on the left stick. (No I don't recall the fancy names they have for that stuff,LOL) This radio has a left and right variable right roller knob located at the respective top lower corners that I tie to the tracks of an excavator for example, and then use the sticks for boom and stick operation. I have never had an issue with this brand. Never had quality concerns. No malfunctions across 8 different models and 3 different radios from this brand. Receivers are priced very competitively. Lows: Only glaring omission is naming models is limited to numbers. I have gotten used to putting a stick on number on top of the cab of my models, and then I have to use the menu on the radio to switch to it. Out of the box, when you switch screens or setup a model, the delay to auto change back to run mode is way too short, at least for me. But that can be changed in the setup field. I highly recommend this brand if you would rather spend money on models than radios and electronics.
MrDonkey2u
2025-08-31 16:37:45
I bought to see how " cheap" i can get flying. I have a Spektrum radio but bought this to see how well it works. It works great!! If you getting started inr/c planes, start here. The extra recievers are inexpensive, radio holds 10 model memories i think, and you can adjust everything like the more expensive radios.
Jesse M.
2025-08-30 19:26:41
Ehilenit feels pretty cheap, this thing is pretty indestructible. While out at the river using our rc boats, my friends 2 year old hurled my remote into the water. I drained it, popped off the back to let it dry, and it works great!The remote has everything I want in it, and it's awesome as I expand my rc use, I keep finding more things that this remote can do. It's saved my have to by servo reversers, y cables, and more. I love this thing.
bigbristv
2025-08-25 18:56:38
This transmitter receiver combo is a nice cost effective choice for flying if you need up to 10 channels. I only wish it had more than 1 3-position toggle switches.
ybk
2025-08-19 13:21:04
I love the features like receiver batteries charge being constantly being monitored.I don’t like the uncomfortable servo motors.
johnpdo
2025-06-01 17:33:14
works for my R2 build
Bobby Belley
2025-03-23 11:44:48
So many features for such a cheap product! I get great range and lets me know when my plane is getting too far out. Great job!!
Wingman
2025-02-17 11:25:55
Using the RC unit in racing sailboat. I like the transmitter size/weight for a couple of hours of racing. Performance has been perfect.
Muhammad khurram Asad
2025-01-29 14:06:57
Very nice little radio with tons of features. I think it's the best buy for this price.
Recommended Products
$327.30
$ 99 .00 $99.00