Your cart is empty.
Your cart is empty.
High quality wood veneer edge banding
Wood edge banding is used to cover the exposed sides of materials such as particle board, plywood, metal or MDF. The veneer edging increases the durability of your project as well as giving it a perfect finish.
Real birch wood pre-glued edge banding
Our birch wood edge banding is pre-glued with a German high-quality adhesive that provides a strong, permanent bond. The glue is activated by heat and will strongly apply this high-quality veneer edging onto your shelf, furniture or DIY project. You will receive a 1 x 3/4 roll of birch wood, iron-on veneer edging with your purchase.
Easy to install plywood edge banding
The only tool you need to apply this veneer edging is a regular household iron. A hot air blower or edge banding machine can also be used if you have these to hand, but a regular iron will be sufficient for a great application. To apply, simply position the veneer edging on the edge of your plywood or other substrate and smooth it with a few passes of an iron or slide it through an edge-banding machine. Suitable for straight-line edges as well as contours. Bandings are impregnated with a high-speed hot-melt glue that creates a permanent, durable bond.
BUY NOW and complete your furniture and cabinetry edging with this premium quality, iron-on birch wood veneer edging
Brandon Aguirre
2025-08-22 09:04:07
I first bought 30 ft for about 1/3 of the price (meaning it was way more expensive). And when you iron it on. The seams appear and begin to come apart and time. The seams on this version are much harder to notice and seem sturdier. Don't get the Lowe's version!
Jessica McBath
2025-08-19 14:07:32
This is good quality edge banding. Pay close attention to the width measurement of the edge banding VS the width needed for your project. This edge banding is not ideal for 3/4†projects. If your an expert, you may be able to pull a 3/4†project off, but there is absolutely zero hang off (see photo). My project is 1/2†MDF I will be veneering in lays to for use as samples. This edge banding works perfect and the corners glue up seamlessly.Some reviews complain the glued together pieces are obvious or spaced too close together, making the edge banding difficult to work with, or unusable.1.) All edge banding this length will have many glued together pieces. There will never be a 250 foot tree cut and milled specifically to create edge banding.2.) Where this edge banding is glued together, it is a very wide zig zag, about 1†(see photo), and not obvious until you put the banding to your face and search for it. In the photo you can see the glue up on the raw edge banding. I had to get in some good lighting and tilt the banding at an angle to make the glue up obvious. After the edge banding has been glued & lightly sanded with a flat block (emphasis on LIGHTLY), using 400, 600, or 800 grit sand paper, its impossible to spot (see photo with my finger pointing to a glue spot that cannot be seen). The only issue you may have with the glue section being problematic is if you do not use something between your iron and the edge banding. If you apply banding with a lot of pressure, as with all banding, some glue may rise up to the surface. This can make the surface just sticky enough to catch film or dirt off of the iron...the dirt On the iron is the problem, not the edge banding. Recommend using wax paper between iron and banding for glue ups. When the wax paper has been used several times, replace it with a fresh piece.3.) I measured multiple areas to find the length between glue ups. My roll had glue ups, each one exactly as shown in the photo, around every 4 feet, pretty standard for this size roll.All in all, this is good quality edge banding at an exceptional value. The price of this edge banding will buy you 25’-50’ at the big box stores.RECOMMENDED
R. Reed
2025-08-12 11:56:45
The grain and texture is great. It irons on and holds! Adds that finished look to projects.
Nate&Jess
2025-08-11 18:58:13
We used this to trim edges of plywood for a murphy bed. The width makes it great if you're using 3/4" plywood, as there is very little overlap. It was super easy to trim with a sander instead of the traditional blade. Irons on easily, works as advertised. If you have something that isn't completely square or anything slightly rounded, this is not very effective. You can manipulate it with painters tape or something similar to get really close though which is nice. Great product if you're applying to a perfectly flat edge, otherwise I'd probably stick to older glue on veneer.
ANGELA M CASTILLO
2025-07-29 16:29:53
Bought these for a closet I did, the end product it very good, adhesion is good.
Persnickety
2025-07-02 12:52:25
Update:At this point we have used 5 rolls (and need another). The quality is very good and the glue still has had no issues pulling or moving. We use it on Grade a/b plywood. On inexpensive plywood (home depot 30$ a sheet stuff) we have had to ... slow down...and take our time with the glue but it always sticks. (ie get it very hot and force the glue into the wood pores with the edge of a piece of wood). We have seen some "short splices" in the 3 foot range. Both those items are very picky as I have seen 200$ a roll edge banding that doesn't perform as well as this. We are very happy with this product. And Hope it sticks around for a long time.Original review:We have used a roll and have another on order. The veneer itself is of good quality. We have seen virtually no pitting or joints in it. It stains well and accepts paint well. We have generally been applying it directly off the roll without straightening. (you can use the edge of a table to take the bend out of veneer like this) When applying it has a tendency to wander a little more then other edge banding we have used but it is easily heated and adjusted into position so really this is a non issue.Edge trimming works as you would expect. We have only had the cabinets that are made using this product in service for a short time so I can not comment on long term adhesion/quality. But there are no indictions of it pulling or moving yet. All in all a good product for a good price.
Isaac Ruiz
2025-06-28 11:39:28
For a standard 3/4†4x8 sheet birch plywood, this product worked great. Easy to apply and it’s wide enough so no trimming is required.
Michael
2025-05-14 14:17:41
I loved how this product matched my current wood but also how seamless most of it went on! I’d used some from big box stores but those have since fallen off but this has been a very strong product. The glue melted fast and pressed firmly, I almost completely blended in!Not to mention the bang for buck with this product. I’m extremely happy and will certain purchase again when needed.
Dan
2025-05-03 10:59:26
Very happy with this purchase. It’s exactly what I needed . Application of product was easy.
C.Bourgeois
2025-03-27 11:14:34
My husband could not find this edge tape here in Moncton N.B. We found it on Amazon and are very happy with it. The tape worked as expected. thanks
Beverly Hollingshead
2025-03-24 15:57:02
I have used a lot of this roll since I received it and I am very happy with the quality. I will definitely buy it again from this seller.
Customer
2025-01-27 16:22:44
Goes on easy and sands to blend in seamlessly with the plywood. Good value for the price. I would definitely buy it again.
Joanne
2024-12-23 15:38:59
Came exactly as expected. High quality. Very pleased with purchase
Recommended Products
