Your cart is empty.
Your cart is empty. USB Type C version of USB charging port PCB for PS4 controller. All the necessary teardown tools and cutters included in the box
[USB Type C vs. Micro-USB]
1. USB C delivers a more stable connection
2. Supports forward and reverse insertion
3. Unify the interface with other devices
[Which model to buy? ]
🔺JDS-013C is for the 1st gen DS4 with No LED breathe backlit with:
JDS-001 and JDM-001 main board
JDS-011 and JDM-011 or JDM-020 main board
JDS-030 and JDM-030 main board
🔺JDS-045C is for the 2nd gen DS4 with LED breathe backlit with:
JDS-040 or FJDS-040 and JDM-040 main board
JDS-050 / JDS-055 and JDM-050, JDM-055 main board
[Kindly Reminder]
1. Two models for different DS4. It’s a must to check the model of your original JDS or the main board before ordering
2. The back plastic cover must be cut and enlarged, which voids the warranty
3. Serious DIY skills required in the operation
Kyle
2025-08-12 17:36:48
The micro USB went out on my controller so this was a perfect upgrade. Easy to install and comes with everything you need.
Tonyeinstien
2025-07-23 14:17:20
MAKE SURE YOU CONFIRM WHICH CONTROLLER YOU HAVE!!! I bought the wrong pcb for the controller i intended it for, but luckily I had another controller that was the right version. The pcb works great though. The led colors work and I haven't had any connection problems. This is a great alternative to upgrade your controller and also get rid of your messed up micro usb charging port.
JRosales
2025-07-16 16:30:48
Jds055Worked just to charge not to use with type c cable for low latency. Major laggg
Sip
2025-05-22 13:07:24
Worked. Easy to install. The hardest part is to cut out and make the micro-USB hole larger to fit USB-C. But if you match your version of the board and cable, it is a relatively simple mod to ditch micro-USB. I only use my controller with my PC. Bluetooth functionality is unaffected. I have always had weird problems with the status indicator light on these controllers but that didn't really change with this mod. I'm happy.
Analease Farrell
2025-05-12 10:01:24
great tools and everything to complete job but i was unable to get USB-C port to work, put it in controller and had to put original back LED did not work and was unable to charge.
Numa
2025-04-02 10:02:27
Everything you need to mod your ps4 controller is included in the package. It took me probably 20 minutes to swap them out.The product comes in a nice package, and the controller now works with USB Type C. Lighting no longer works on the controller but I won't care too much
ian
2025-03-09 18:43:20
The included tools make installation smooth as butter. The flat craft knife blade is fixed to a miniature 3D printed handle that’s far more appropriate for a job like this.I appreciate that ElecGear put in the effort to give measurements on how much plastic to trim. The precise values are nice to know for the sake of guidance, but go slow with your guesstimations in the trimming process and you probably won’t need to reach for any rulers. The miniature cylindrical file also made creating the rounded ends of the USB-C connector extremely simple. Smoothing out any and all rough edges was a breeze too.So far I have only installed one of these, and I used it with the ExtremeRate Decade remap shell for PS4. It’s a larger housing than the official controller shells, and uses a different plastic mold. I was a little concerned that the plastic was too thin already near the port on the ExtremeRate shell, but actually it fits perfectly. Which is great because I really wish they had a USB-C version of that shell. Thanks to this ElecGear kit, I made my own USB-C version.Can’t stress how much the flimsiness of micro USB frustrates me. Kind of feels like I have no use for a PS5 controller now, and this was way cheaper.
jen
2025-01-16 18:06:13
Works great, better than the original connector.
Recommended Products
