Your cart is empty.
Your cart is empty.Product Description
- Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard.
- With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system.
- The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, it support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.
- Back made of aluminum alloy, strong heat dissipation
- Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
- Utility or generator auto-control relays make it easy to compose the hybrid power system
- CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
- High quality & low failure rate components of ST and Infineon to ensure the product’s life
- Battery Type: Lead-acid batteries and Lithium-ion batteries.
- Auto control system to limit the charging power & current go over the rated value.
- Hundred percent full load operation in working environment temperature range within charging & discharging
- Battery temperature compensation function
- Real-time energy recording and statistical function
- Automatic over-temperature power reduction function
- To monitor or set the parameters by using the phone Apps or PC software.
- Always connect battery first
- Tracer AN series is a common-negative controller, according to the practical application, all the negative terminals of PV array, battery and load can also be ungrounded, but the grounding terminal on its shell must be grounded, which may effectively shield the electromagnetic interference from the outside, and prevent some electric shock to human body due to the electrification of the shell.
- For common-negative system, such as motorhome, it is recommended to use a common-negative controller; but if in the common-negative system, some common-positive equipment are used, and the positive electrode is grounded, the controller may be damaged.
- If the remote temperature sensor is not connected to the controller,, the default setting for battery charging or discharging temperature is 25 °C without temperature compensation.
Package includes:
1 * 5415AN Solar Charge Controller
- Nominal System Voltage: 12/24/36/48VDC or Auto
- Rated charge Power: 625W/12V 1250W/24V 1875W/36V 2500W/48V
- Battery Input Voltage Range: 8V～68V
1 * Remote Meter MT-50
- MT50 can display various operating data and fault info the system.
- The information can be displayed on a backlit LCD screen
- The buttons are easy-to-operate, and the numeric display is readable.
1 * USB to RS485 cable
- USB to RS485 converter is used to monitor each controller using Solar Station PC software.
- The length of cable is 1.5m. TheCC-USB-RS485-150U connects to the RS485 Port on the controller.
1 * Remote Temperature Sensor
- Acquisition of battery temperature for undertaking temperature compensation of control parameters, the standard length of the cable is 3m.
- The RTS300R47K3.81A connects to the port on the controller.
- NOTE: The temperature sensor short-circuited or damaged, the controller will be charged or discharged at the default temperature 25 ºC.
rhamilton
2025-07-05 12:39:58
Product is used to manage solar panels on a 44 foot catamaran. What power I use at night is quickly returned next day. Independence!
Dennis
2025-07-03 18:53:20
I had a lightning strike which took out my Epever charge controller…I replaced it with another Epever charge controller…I would recommend this product.
DaveC
2025-07-02 18:38:42
The MT50 control module has a line through the middle of the display.The cable from the MT50 to the controller could be 12" to 18" longer.Insert bosses to hold down solar input cables and battery output cables could be more robust. Snapped 1 off.
Minding my time
2025-06-16 16:01:23
I have three 60 amp EPever and two 40 amp versions on three different systems and they have been trouble free.I feel that they are a good product and value for the money.
Farm Girl
2025-06-14 17:07:27
NOTE: PC required to change factory defaults. SELECT and ENTER buttons do nothing.Software download, required to communicate / set operating parameters with the 6415AN, would not install. Repeatedly got prompt to "REPAIR" or "REMOVE". Never RUN. Factory defaults included disabling MANUAL ability to set op parameters. Reached out to iSunergy via email (there is no phone number) with explanation of problem. After 3 days they asked for my order number and offered NOTHING to fix the problem. On day 4 they asked questions which made clear they did not read my original message. They demonstrated no urgency in addressing the problem.As return deadline is fast approaching, and "customer service" offered no solution or way forward to sync this controller to my batteries, the unit is packed and going back. MidNite DIY on way. Actually talked to their tech on the phone and got info enough to make decision to buy. Imagine talking to a human being in the USA - real time!!!!
Steven W. Snyder
2025-03-27 13:43:53
Once programmed, it works very well with my 6 435 watt panels to charge my 5KW 48v LifPO4 batteries. I also bought the Bluetooth module and that seems to work ok with my android phone, although the software is clunky it is usable. The windows software and connection is hit and miss for getting a connection via the USB to lan adapter included.
Steve Carpenter
2025-03-20 10:40:41
I haven’t installed this yet but have tested it with 880 watts of solar. Works as expected
Angel Suazo M.
2025-02-22 19:02:52
This controller has more features than advertised and just get a little warm when working at 90% of the rated capacity. I don't need to move to check the parameters because I have the remote monitor close to me. This was a great purchase.
Conrad
2025-02-19 14:33:15
Très efficace, bon rapport qualité-prix. très facile d’utilisation.
Customer
2025-02-16 10:42:15
Set it up and it has been working since with no problems.
esther
2025-02-14 09:22:02
this is a very quality product with some wonderful monitoring capabilities. very efficient. but a few issues with usability remain. it requires you to download its program to initialize its battery charcteristics for lifepo4 batteries and its manual isnt too clear but if you know what you are doing its a good product.
Franc Hauselmann
2025-01-15 10:05:46
Très facile à installer et utiliser. La documentation est bonne. J'apprécie le fait qu'il est possible de contrôler une génératrice automatiquement si les batteries se déchargent trop et qu'il n'y a pas de soleil. Le programme qui permet de lire la consommation par USB est OK (on peut se développer son propre programme avec la documentation MODBUS disponible sur le site du fabricant).
B Holness
2025-01-10 15:38:38
For anyone setting up a solar system this is an affordable, easy to set up, versatile controller that can handle up to 48V input.
Recommended Products