Your cart is empty.
Your cart is empty.Product Description
Enduring Steel EV Charger Box Holder, Wall Mount Bracket for Mobile EV Charger
Adjustable EV Charger Controller Holder
FOUR Level Adjustable To Fit All Kinds of Mobile Charger Size Less Than 4.75x2.95 Inches(WxH).
Part List and Install Guide for EV Charger Controller Holder
UPDATE Installation: Screws go up from bottom will be much easier to install !
Hang Your EV Charger Controller, Do Not Let it Lie On Floor
Ronald S Johnson
2025-08-15 10:20:07
This bracket installs easily. It is adjustable to the width and depth of various charging units. This unit fits my Godiac charger just fine. The charger basically drops into the bracket so if I wanna take the charger with me, I just left it off the bracket.
C. A. Pelletier
2025-07-16 16:37:24
My 1st try was Holder made out of Plastic which broke after 3 months. This is study metal and will Not break.
NEWC
2025-06-14 10:21:59
Just what I needed to hold the charger to take pressure off the cord. Very adjustable.
Blurry Vision
2025-05-18 15:48:01
Flexible design which can accommodate most chargers, as you can see I use it for my Honda charger and fits my other portable charger if need be. Very easy to install, took me just a few minutes.
Customer
2025-03-02 15:31:43
After a few weeks of use, the screws holding it together failed and can't be reinstalled. A waste of money - no warranty support.
A. Davis
2024-12-29 12:56:02
Bought this to hold the dual charger that came with my 2023 Bolt EV 1LT. The main problem I ran into was that the opening at the bottom was about 1mm short of allowing the circular part of the charger base to fit in. I was ready to return it (actually packed it back), but then thought that there was no guarantee that any of the alternatives would work better. So I used a drill with a grinder bit to grind the edges of the opening by just a tiny bit and it let me get the part installed right in. Now, this would only be a problem if you install the charger with the plug facing up, which, if you judge by the direction of the screw holes on the back is not the recommended orientation. So if you install the charger with the plug facing down, then it should work right out of the box. Anyway, with all said and done, it seems to work fine and do what it is supposed to do.
Frank Effler Jr
2024-12-17 17:52:37
Expandability of the base was limited and would not adequately hold the Audi charger unit. Disappointed
J Frank
2024-12-10 13:02:41
This is a solid holder and a bit clunky to mount unless you are out in a nice open spot. The wall mounting plate has 3 screws, 2 of which cannot be reached when the side brackets are attached. Each side bracket attaches to the bottom flange with 2 tiny screws. Use a magnetic head screwdriver or you will drop them, unless you're fingers are the size of a 4-year old!We mounted under an overhang laterally due to unique geometry of charging line connection. Works great, even though intended for vertical wall mount. Very flexible usage, but if you need to re-position, you will have to first remove side brackets to get at back plate screws.
Recommended Products