Your cart is empty.
Your cart is empty. A complete wireless handy flash unit, FlashQ Q20III, is a full featured GN20 flash with detachable radio transmitter, LED lighting, flash head tilting, color gel pack and diffuser panel. It is convenience to charge Q20III with standard USB Type-C power sources. Just make certain to use rechargeable Ni-MH batteries on Q20III flash body.
Technical Specifications:
Guide Number 66ft (at ISO 100)
Focal length coverage: 32mm (Full-Frame)
Manual flash power ratio control (7 steps adjustable, 1/64 to 1/1)
LED video light (7 steps adjustable, Max. 60 lux output at 1m)
2.4GHz low-power digital radio (FlashQ Receiver) inside Q20III main body
32ft wireless operating range
Tilt-capable flash head, up to 90° and with click-stops at 0°, 45°, 60°, 75°, 90°
Other functions: S1 / S2 optical slave, modeling light (LED)
Transmitter per charge : 80 hours operation and 120 days standby
Two AA-size alkaline / rechargable Ni-MH batteries for Q20III main body
Recycling time (1/1 full power output) : 7 sec. by fresh alkaline batteries / 6 sec. by Ni-MH batteries
Number of flashes : 100 - 2000 flashes by fresh alkaline batteries
LED lighting time: approx. 1 hour (at full power LED output and by Ni-MH batteries)
Flash color temperature : 5600K±200K (same as daylight)
LED color temperature : 5500K±300K , CRI 95
Dedicated socket for FlashQ transmitter attachment
Dimensions : 2.3(W) x 4.0(H) x 1.1(D) inches (with FlashQ Transmitter attached)
Weight : 4oz (without battery)
Package Contents:
1 x FlashQ Q20III main body (Battery is not included)
1 x FlashQ Transmitter (with built-in rechargeable lithium battery)
1 x Diffuser panel (-1.3 EV)
1 x Color gel holder
1 x Color gel pack (7 colors)
1 x Protective pouch
1 x USB charging cable
1 x User manual
* FlashQ Q20III main body requires two AA batteries (not included). Highly recommended to use the rechargeable Ni-MH AA batteries on FlashQ Q20III for quick recycling time and convenience of USB charging capability.
m.maklakov
2025-08-18 13:58:56
This flash is perfect for a little fill, or to trigger slaves. Removes easily for off camera flash. I love it!
M. Gonzales
2025-06-10 13:56:28
Bought this to use with my GRiii. Everything is working as expected, I really like the off camera setup for some bounce flash photography.
Chenglin Suo
2025-04-28 13:03:11
I have a dead 20ii Transmitter which needs connect topower source all the time. In its website's introduction material for 20iii, there is a picture looks like you can charge the transmitter with the flash body. The fact is that it can't. The body doesn't output its battery power.
Jacob
2025-01-15 10:05:08
Lovely little flash that I've been using with my Yashica FX3 film camera, the video/modelling light is a nice touch and the wireless option works really well too so far. Doesn't attract too much attention due to its size also.ðŸ‘ðŸ¾ðŸ‘ðŸ¾
Recommended Products
