The media could not be loaded.

Let me explain why this inferred temperature gun is the best. Aside from the -30°C to 650°C (-22°F to 1202°F) range of measurement, the accuracy is +/- 1%. This is pretty significant. I've researched so many different temperature guns and read "Top 10 Temperature Guns of 2017/2018/2019" lists and this one is among the most accurate hands down. For a few examples, the 630 Infrared Thermometer, 1080 Infrared Thermometer, 800 Infrared Thermometer, 774 Infrared Thermometer, 1025D Infrared Thermometer, and 1030D Infrared Thermometer all have an accuracy of +/-2%. The Etekcity 774 Infrared Thermometer, 1080 Infrared Thermometer, 800 Infrared Thermometer, 630 Infrared Thermometer, 1022 Infrared Thermometer, and 1022D Infrared Thermometer all have a +/- accuracy of 2% as well. The Nubee NUB8550H Digital Infrared Thermometer -58°F~ 1022°F (-50°C ~ 550°C) has an accuracy of +/- 1.5%. The Fluke 62 Max, Fluke 59+, and Fluke 59 have an accuracy of 1.5% or 2%. The Amprobe IR-708, IR-710, IR-712, IR-720 IR-730, and IR-750 have a +/- accuracy of 1.8-2%. Some might say that the Amprobe IR-750 has measurements from -58 °F to 2822 °F (-50 °C to 1550 °C), which is a wider measurement range than the Fluke 62 Max Plus. However, the Fluke 62 Max Plus is still more accurate. If you were to place both temperature guns nearby a furnace or a Boeing-737 engine, I'd trust the Fluke temperature guns more than the cheaper Amprobe products. The Amprobe IR-750 does not have a duel laser. I like how this one has two lasers instead of one. The lower the number for accuracy, the better the instrument. This makes a difference. Plus, the Fluke gun is very durable. I've seen their drop tests on Youtube. So, what are its flaws?The AA battery doesn't last long in it. To be fair, though, none of the batteries in these temperature guns last long. You'd be lucky to get even 20 hours out of some of them. Like all other expensive devices, be careful changing the batteries. Not to mention, when the battery gets very low in these temperature guns, the instrument might start to give more inaccurate readings. This is normal, just change the battery. Next, there's the manual. The manual could have been more thorough and specific to inform consumers how to navigate the instrument. Fluke needs to hire a few technical writers to improve their product manuals. If you choose not to find help on the Internet, it will possibly be a trial-and-error process. Furthermore, a lot of us wish there was just a simple ON/OFF button with this gun, but you have to go through a series of steps just to turn it on and off, such as pulling the trigger, navigating through the menu, and pushing the set button. Other than that, this is potentially the best purchase. Feel free to spend an additional $12 for the small carrying case. Although the 62 Plus is quite durable, I'd rather keep it in the carrying case than the shipping box itself. In the end, I would highly recommend this temperature gun. If you want an even better gun and have about $800 to spend, the Fluke 572-2 High-Temperature Infrared Thermometer is a bit superior. The temp. range is up to 900°C (1652°F), the +/- accuracy is 1%, and the Distance-to-Spot (D:S) ratio is 60:1. It also has high and low temperature alarms. In all honesty, you can't go wrong with either Fluke product.

The Fluke MAX Plus infrared thermometer works perfectly. It has two laser pointers that show the edges of the region of acceptance. It seems to be reasonably accurate. The physics of this depends on knowing the emissivity of the surface. The default value is 0.95, but you can change it with in a menu setting. Apparently most things that are not shiny metal have pretty much the same emissivity.If you need to work in dim light, there is a configuration setting that enables a back light. It would have been nicer if there were button to turn it on.There several other menu settings. One controls how the data is processed when you sweep over an area while holding the trigger. You can choose average, max, min, and maybe something else. There is also a setting to sound an alarm if the temperature is too low or too high. This would be useful in industrial settings where you repeatedly used it for the same thing. You can choose Fahrenheit or Celsius.It is really tough. It clams to be able to survive 3 meter (roughly 10 feet) falls. I've not tested this :-) .It runs on a single AA battery.I mostly use it in the kitchen. It is great for getting the oil in a frying pan up to just below the smoke point (about 450F for canola oil). I also use it to check temperature in the freezer and refrigerator. I have screwed a cup hook into the bottom of a kitchen cabinet, and it conveniently hangs there using the supplied mini-caribineer. It is also fun to find out things like how hot a hot iron is, how hot the flue pipe from the furnace is, etc.Bottom line: This just works perfectly. There are several cheaper models, but this one has the dual laser pointers and is the most accurate in its class. I recommend it over the similar cheaper ones.

You can easily buy a much cheaper IR thermometer for under 40 dollars or so, but you will never get the quality or durability of a Fluke.. Fluke is an electronic standard in the industry , and this will last for many many years with no issues.The readability is so clear and well defined, and the laser brightness can be seen for quite a distance, quite easily. The results are always identical when monitoring the exact same spot, and the accuracy is second to none.. If you want a IR thermometer , that is going to be with you for a long time, and reliable, this is the way to go.. Spend the extra money and do it right. Drop rated for almost 10 feet, and the one single double A battery seems to last forever.

Einfach fantastisch, präzise und zuverlässig.

Non comperate niente altro, se volete accuratezza e affidabilità nelle misure!Fluke è davvero il TOP nella strumentazione.Il prezzo non è nemmeno elevato, se viene comparato alla qualità dell'oggetto.Misure sempre precise e accurate.Lasciate perdere le cinesate da 20 euro.Lo uso praticamente ovunque. Ottimo e accurato.Dalla cucina all'edilizia.Non comperate altro se volete qualità.Qui siamo su un altro pianeta.Un termometro a infrarossi / pirometro definitivo.

Przydatne narzędzie każdemu. Sprawdzam szczelność okien i się sprawdza.

Produit robuste, qui inspire confiance.A peine une fraction de seconde entre le moment où on appuie et le moment où la température s’afficheQuelques options sympa : possibilité de régler l’éclairage de l’écran, l’allumage des lasers (pratique pour viser), quand on garde la gâchette appuyée, l’affichage de la température se fait en continuJ’ai essayé de jouer avec le réglage de l’emissivité, mais ça ne joue « que » sur 1 ou 2 degrés. Soit bien en dessous de la marge d’erreur des relevés que je fais