Your cart is empty.
Your cart is empty.Quick and easy biscuit cuts for super-strong Miter joints, T-Joints, butt joints and edge-to-edge cuts. Including an adjustable fence, a dust port with dust bag for easy cleanup and preset depth stops for biscuit sizes 0, 10 and 20.
Danny Twork
2025-09-05 18:47:20
This is a great machine for the weekend woodworker. Is easy to use and does a better than expected job. You don't have to worry about being off a little on your measurements because the the biscuits are slightly smaller. Your worry is not cutting the holes but that the biscuits swell with the glue. This is a well built tool. Heavy because it has a strong motor. I used it on walnut, maple and oak and it cut all with ease. Pine would not be a problem for this tool. I recommend it with 5 stars.
Bussy McBusface
2025-08-01 14:33:28
Just received my biscuit joiner and it does a great job of buiscuit joinery! No complaints. My complaint is similar to others in that it came broken. The packaging is terrible with the tool floating around in the box. That said, it is very easy to see why the thing clogs up with chips of wood and where mine broke, it allows the chip to clear themselves very nicely.If I were a pro, I probably wouldn't have bought something so cheap but I am a weekend warrior building an RV in a school bus and have a specific use in mind. My initial tests of this item gave me great results and my seams are perfect. The tool doesn't clog up with saw dust because of the break either. So, yeah I get sawdust all over the lower right side of my shirt but I am getting what I needed.I gave 4 stars strictly because of the broken item. But, for the money, I will take it.
Thomas Hughes
2025-07-22 16:10:12
I had never owned a biscuit cutter before, or used one. I studied the available models before selecting this cutter and decided to try it mostly because of the price and the reviews (thank you to all who reviewed the item). I just finished my first desktop using the cutter on oak boards and am very pleased with the performance. Be sure to clear out the vacuum bag before it gets compacted... that means every 7 or so cuts. The only potential issue for some buyers is that the "deck" doesn't have a raising mechanism like some of the more expensive models, but if you're planning to mostly use the cutter for standard boards (1x whatever) it will work perfectly. And, for occasions when you want to use it for dimensional lumber, you can always set the cutter on a board(s) to raise the deck to the desired height for your project. One other comment on the packaging... I was amazed that there was no damage to the item because the packaging doesn't seem secure, or substantial enough for the size of the item. But, mine arrived in perfect condition. A really great product at a truly reasonable price.
Jeanne
2025-07-05 15:25:15
Very good tool so far , my Son and I did a custom counter top wright away using 2 1/2 " stock so we had to double up the biscuits . We glued it and pipe clamped it . It turned out flat as a pancake . As all you wood workers on there know that's rare using that heavy a board . The price was great and it came on time and does the job. Love it
lewweingarth
2025-05-27 17:08:39
Does the job. The setting for which size biscuit are flaky and eventually vibrate into a wrong setting, but since I only use one size at a time, I use caulk to hold the knob during the job. I really can't find anything wrong with this tool. If I were doing this 8 hours a day instead of 8 hours a month, I'd invest in a Dewalt, but for as little as I use it, the loss of time setting up and frequently resetting this tool isn't important.
C. Owen
2025-05-19 12:34:11
I debated between this, the cheap one, or the Dewalt, the expensive, yet tried and tested one.I ended up with this one because for the time being I presumed my use to be minimal. While I have used this tool regularly, it is not something I employ on a daily basis. That being said, I have had no issues with it whatsoever in performing the task it was designed to.If I had one complaint it would be that even with a shop vac hooked up to the dust collection outlet (with the appropriate hose diameter reduction in place) it can become a bit stuffed with shavings. Not sure if that's on me or if the internal chamber could have been designed a little bit better to encourage better flow of waste wood.Still though, 5 stars due to quality and value for money. Would highly recommend for anyone that doesn't see the need to spend the extra $100+ on the more established brands.
pchunterpa
2025-04-20 18:10:41
So far only to give this unit 3 stars. The biscuit joiner runs and works but the factory blade is absolutely garbage. Didn’t matter if it was hardwood or softwood, the blade would burn the wood. Either the blade is just junk, or not sharpened from the factory (dull) or I received a defective blade. I will update after the new blade arrives.Overall the biscuit joiner seems well built and does have some heft to it, which is nice because I don’t feel like I will break it. All the adjustments work fairly well as far as the angle adjustment and the height adjustment, the depth adjustment on the other hand does work but is loose and sloppy. Will have to tinker with it to see if I can make it better. For a first time biscuit joiner purchase I am overall happy with it and would recommend it, just check the blade on some scrap wood first before diving into a project.Amazons customer service was great as always, I received a partial refund in order to purchase a quality blade to see if that will fix the issue with this joiner, hopefully it does.
Jim
2025-03-28 17:43:31
It works as expected. Based on other feedback I was expecting to be a little disappointed. I wasn't! I don't use this tool on a frequent basis so for my needs this is perfect. I do think though that it would be a good tool even if I did need it more. It feels powerful and solid. I am please with this purchase.
Jose76
2025-03-13 19:40:47
Soy aficionado a la carpinterÃa y esta me pareció una excelente herramienta, me encantó el desempeño al elaborar un mueble con MDF enchapado de okume. Es mi primera ensambladora y la experiencia ha sigo muy grata. La potencia muy buena el ruido es aceptable. El precio es otra de sus cualidades, no es la más económica, pero si se encuentra en este segmento.
Pierre
2025-02-22 13:21:09
Works fine. Easy to used
Inténtalo
2025-01-08 10:43:26
Compre recién esta engalletadora, a primera vista se observa un artÃculo no muy robusto, ni de material de primera calidad, me dió la impresión de ser un artÃculo de malos terminados. Pero ojo no todo lo que se ve malo debe ser malo, este artÃculo cumple su función bastante bien, enseguida la puse a prueba y me dejó satisfecho tiene buena potencia y hace la ranura muy bien, la obtuve muy por debajo del precio de otras marcas y creo que si no eres aficionado y te agrada hacer muebles para uso personal, está máquina es para ti, habrÃa que verlo con uso continuo a ver qué tal trabaja, pero por la potencia me supongo que deberá cumplir muy bien con cualquier uso.
cj
2024-12-25 13:13:07
only made a dozen cuts to see how to use it. seems to be good. in the next 2-3 months it has to make around 1000 biscuits or 2000 cuts. will see how it holds up long term.
rodrigo3638
2024-12-21 17:11:49
muy practico y muy potente
Recommended Products
$2,999.99
$ 99 .00 $99.00