Your cart is empty.
Your cart is empty. Glarks 50pcs carbon steel flat head threaded rivetnut insert nutsert rivet nut set
【Specification】:
Head Type: Flat Head
Color: Yellow
Material: Zinc Plated Carbon Steel
Rivet Nut Size: 1/2"-13UNC
About our rivet nut:
These rivet nuts are suitable for a variety of thickness of the material including steel, fiberglass and plastic, etc, riveting firm with high efficiency, easy to use.
Application: Perfect for automotive, furniture, decoration and other electrical and industrial products
【Package Details:】:
Thread ------------ Drill Hole Size -------- Quantity
1/2"-13UNC ----------- 0.67'' -------------- 50pcs
【Note】:
♥ Please check the specific size of the product according to the second picture. Due to manual measurement, there may be errors, please don't mind.
♥ If you have any questions, please feel free to contact us and we will try our best to help you.
B. Hovander
2025-08-23 12:40:16
These have worked well for securing items to the exterior of my camping trailer structural edge of the roof panel. Thanks!
D~D
2025-07-22 10:15:24
These are impossible to find locally, even at specialty hardware stores. I used some of the 10-24 to reattach rocker panel trim on a Jeep.The screws, washers in photo are not included. Installed EASILY using a Harbor Freight rivnut tool. The large sizes will require specialty tools.Only minor complaint, the box is a bit flimsy, the dividers between sizes get dislodged. The hardware itself is good quality.
kaitlyn dean
2025-06-21 14:25:14
Had to buy more of the size I needed great for small project
Clifford Johanson
2025-06-16 15:27:56
Works as advertised.
Scott McKean
2025-06-01 11:55:45
Gret assortment for the price!
Jake
2025-05-19 14:26:40
Pretty nifty little things. I've used a bunch of the 1/4 20s and they're all holding up great. Also used 2 of the 1/2 13s and they hold tight! Easy to install when you got the right tool. Lots of different sizes for every application.
Joe
2025-05-16 16:42:21
I used these to install mirrors on my truck they worked good
Customer
2025-03-26 17:35:38
I made a roof rack with Unistrut pieces for my Jeep Grand Cherokee. The factory rivnuts are shamefully small, so I replaced them with these using a homemade tool. These are incredibly strong and heavy duty. Highly recommended.
Customer
2025-03-17 16:01:22
exactly as ordered
Denise
2025-02-23 12:22:43
great rivnuts - need to be careful with 22 gage tin as it is very hard to get good crimp - on 18 gage and thicker perfect
david facchini
2025-02-11 12:41:10
installed them without special tool just , nut bolt washer and vice grips. Just a note make the hole you drill as small as possible to get fitting in.
Tim Flynn
2025-02-05 14:59:03
Worked well with my tool I already have
John
2024-12-26 18:53:57
Worked well and get lots for the price, no complaints.
Recommended Products
