Your cart is empty.
Your cart is empty.Product Description
When you purchase Glowshift's 32mm (1-1/4") Water Sender Adapter, you’ll also receive (2) hose clamps which secure the line to the water temp sensor hose attachment. These clamps will firmly tighten to the radiator hose, ensuring that the Water Sender Adapter has a leak-tight seal. GlowShift makes the process easy with installation instructions, an installation video, and free lifetime tech support to walk you through the process step-by-step.
Quick Install
With a few simple steps GlowShift’s Water Sender Adapter can be installed along with your water temperature sensor.
Cut the Coolant Line
After making sure that the engine is cool, locate a relatively straight section of the coolant hose and make a clean cut through the line.
Install the Adapter
Install the clamps over the two cut ends of the hose and place the water temperature sensor adapter in between, securing it tightly into place with the clamps.
Install the Sensor
Install the temperature sensor into the adapter, ensuring it is properly tightened. We recommend using Teflon tape on the sensor so that no leaks occur.
Who We Are
GlowShift is your source for cutting-edge aftermarket automotive products specially designed for cars and trucks. Our diverse lineup includes a variety of gauges, gauge pods, and gauge accessories such as adapters, sensors, wiring harnesses and much more.
Tommy
2025-08-28 12:09:55
I ahev tried more than one brand of this to be able to add temperature sensors, pressure sensors, and even an overflow nipple to the cooling system of my race car which is all custom. Other brands leak, deform, etc. The Glow Shift one is solidly made, no leaks at all, lightweight, and comes with 2 good clamps. This is by far the best quality adapter you can use.
Acer Owner
2025-08-09 13:06:21
High quality product and finish. Fit perfect and works like expected. Wish they would have a standard measurement for the diameter along with metric. Hoses don't usually come in metric diameters.
Yusuf B.
2025-07-27 17:55:59
Great anodized finish and solid. Also came with 2 stainless steel clamps as well!
DarwinC
2025-05-30 11:35:24
Used for my 2003 land rover for the "inline therm mod". Works perfectly, good finish, holding up fine even after several months. Amazon has good pricing and shipped right away. Can't really ask for more, can ya?
Wesley payne
2025-05-08 18:11:35
It was way to small didn't like the idea of cutting my radiator hose.Then they asked me to measure the inside of my hose. Was not taking my hose off loosing antifreeze to measure the in side with ain't much difference of outside maybe a few mm
Levan Velijanashvili
2025-03-29 16:54:16
Works as expected.
logan t.
2025-03-27 11:56:06
Ez and simple
Kindle Customer
2024-12-14 18:39:08
Have a temp gauge not just light
Recommended Products