Your cart is empty.
Your cart is empty.GodHand Ultimate Nipper 5.0 SPN-120
Andy Stocking
2025-07-23 17:32:57
I'm legitimately astonished by how good these Nippers are. They cut through spures buttery smoth with almost no effort leaving far less sprue-bits attached to the parts. Really top-tier product.
Hagiya
2025-06-17 12:12:41
Honestly I'm not sure why I never bothered to get nice tools for something I do so often; after nearly 30 years of building Gunpla, I've always used mediocre nippers from various local "hobby stores".Welp, finally took the jump and, while these aren't actual magical tools that completely eliminate nub marks, they come pretty damn close. And while these are more fragile, proper usage will result in it lasting YEARS to come.Some pointers:These are NOT meant for "cut once" style of building; you MUST cut the piece off the sprue first, THEN use this as a finishing cut. While you can technically use this to cut pieces off the sprue as well, it's generally not recommended, plus less fancy cutters will do just fine for the first cut anyhow.The blades on these are not flush; rather, this is a single-blade cutter with a "cutting board", and as such, depending on the angle/type of cut, it will leave a very noticeable (but very clean) nub that must be sanded or shaved off. However, the sheer sharpness of the blade eliminates most of the finishing job you'll need to do, with minimal stress marks.Do NOT treat these the same as normal nippers; while most side cutters can be used roughly, being able to withstand occasional twisting motions, the blade is extremely hard - and thus, very brittle. Bending motions can absolutely cause the blade to chip, or worst case, break off.In other words, treat this like a fancy tool it is, and you'll have a great time building.
roundheadslovene
2025-06-03 11:59:59
I used my GodHand clippers for the first time yesterday.OMG!Smooth cut.Like butter.No tiny pieces popping off into the sky. Just a clean, smooth cut, and it fell right onto my work space.$$$$, but worth every penny for those tiny pieces. Not only no popping off, but a clean cut, so no need to try to see and sand down those microscopic burrs left on tiny pieces after the cut with other clippers.I didn't think they would make that much of a difference, but they do.Worth the price already.
Raph
2025-04-26 12:34:07
Worth the money
Nance Tippett
2025-04-11 17:56:22
I love them they cut like butter.. but they are tiny and fragile. Be careful with these
Jon Fakler
2025-04-07 17:58:48
Great nippers
JM
2025-04-04 13:30:21
If you only have a few things to clip these aren't worth it for the price. If you are going to cut a lot of plastic off sprues, then these are one of the biggest hobby upgrades you can buy. You'll have far less to clean up on your model using these.Warning: Do not have a brain fart and use them to cut a paperclip to use as a pin, you will ruin them. I...um...well my friend did that and ruined his. He...uh...regrets that.
Mitch
2025-03-20 18:24:39
one of the few products that actually lives up to the hype it garners. after a month and some change i can’t imagine using different nippers.
Ricky Colebrook
2025-03-04 12:48:29
The best nippers on the market
David Siles
2025-03-02 13:38:35
Uso estás tenazas para cortar matrices de plástico de warhammer.Mis antiguas tenazas eran las que vende games workshop y siempre me dejaban marcas en las piezas que cortaban, hasta el punto en que cambié por completo mi sistema y terminé usando el escalpelo para no obtener esas marcas.Estás tenazas cortan el material como si fuera mantequilla, hasta el punto en el que a veces dudo de si realmente he cortado algo.El resultado es impresionante y, por el momento no tengo ninguna queja.Producto de 10.Eso sÃ, aunque no lo he podido comprobar, dicen que la marca redgrassgames hace unas igual de buenas a casi la mitad de precio.
James J. Matney
2025-01-18 14:23:46
Don't judge me because of my fingernails, this isn't a nail clipper review! The first few times I used these snips, I honestly thought I had thrown my money away, until I learned that how you hold them in your hand and how you position the snips against the peice was the secret. After I figured that out, they truly do live up to the name. They are very nearly silent and I wouldn't even say they "cut" the plastic, rather they slice cleanly through the nub with no distortion or pinching of the plastic. If your positioning is correct, they produce a cut so smooth and close to the piece that clean up of the area isn't necessary or, at most, very minimal. Yes, there are much cheaper brands that look very similar, but I can't say how they work, but I can say these work.
Frederic Kostecki
2025-01-13 14:43:48
Le top des pinces coupantes single blade. La coupe se fait en douceur, sans écraser le plastique et laisse donc à peine une marque de coupe. Du coup on évite une bonne partie du travail de nettoyage de la pièce (ponçage etc). Il faut y mettre le prix, mais la rolls des pinces à maquette.
レスタト
2024-12-09 18:53:40
切れ味抜群
Recommended Products
