Your cart is empty.
Your cart is empty.Product Description
About speed description:
1. Match the best results with SATA3.0 data lines
2. PCI-E must have a slot of V2.0 or more, and the speed of V1.0 will not exceed 250m, and PCI-E does not at which X1 or X16 can be a V2.0 version, there is a free X16 slot directly inserted X16 trough
3. Main board BOIS setting: SATA mode to change to AHCI, although some motherboard PCIe is a 2.0 version, but Bois default does not turn on high-speed transmission mode (Gen2 High Speed Mode) Need to be opened in PCI-E 1.0 is only 200- 250m, 2.0 below 350-400M If you do not accept the motherboard.
4. SATA port will slow down simultaneously, not suitable for users who pursue speeds, only for extended hard disk interface
System disk and PCIE turn SATA3.0 adapter card connection condition and solution:
1. The SATA interface mode of the PCIE to SATA3.0 is an AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in the AHCI mode when installing the system on the motherboard, otherwise it is not possible Our card transfer card startup system.
2. If it is determined that the SATA interface installation system on the motherboard is in the motherboard is an AHCI mode, you can directly insert the hard disk on our card, then enter the motherboard BIOS to set the system disk to the first startup.
3. the above two conditions have, if it is still not started, or repeatedly restarted, it may be that the hard disk interface of the motherboard is conflict with our transfer card. The solution is to enter the motherboard BIOS, and set the motherboard's hard disk interface option. Disabled, save the restart side energy start system
Common tray with PCIe to SATA3.0 connection conditions and solutions:
1. When the system disk is inserted on the motherboard, the ordinary disk is inserted on the PCIe to the SATA3.0 card, then it is only necessary to start the transfer card information and the ordinary disk model.
2. such as 1 condition is established, or unable to start the system, then enter the motherboard BIOS, set the system disk to the first startup.
System Dish and Normal Put and PCIE Turn SATA3.0 Connection and Solution:
1. Prerequisitation, if the system is equipped with the original main board installed, it can be implemented using the following measures. If it is an IDE mode installed system, then it can only be reinstalled by PCIe to SATA3.0. .
2. After the establishment of 2,1 conditions, it is not possible to start the main board BIOS and set the system disk as the first start.
3. 1.2 is satisfied, or you can't start, then it may be an integrated SATA interface conflict, please enter the motherboard BIOS to set the SATA to disabled
GK Northwest
2025-08-24 12:50:37
Dropped it into a EVGA Dark x299 PC running win10 pro. It was detected and SATA driver installed automatically. I have 5 HDDs connected to it, and everything is running fine, so far. (it has been up about 24 hrs.) I have not checked R/W performance as that isn't important to my application.
Ryan
2025-08-11 12:03:43
Works flawlessly in the Raspberry Pi CM4 IO Board without any extra hassle. Plugged the thing in, slapped some hard drives on the bad boy and it started basically configured itself when I flashed OpenMediaVault v5
KMPuter Tech Supplies
2025-07-25 16:55:45
This is a review for the unit i received.It was detected immediately without driver installation in windows10. I later installed the included drivers due to the card not actually working.Pros----------Cons1) Out of 8 ports only one worked2) Hot Plug does not work. I tried it at least 30 times using the one working port.
Jonesy3315
2025-07-07 09:50:31
Card wasn't even recognized by my PC, regardless of PCIe slot used. Spent a few hours troubleshooting with zero success. Instead I bought a similar card made by IOCrest from MicroCenter and THAT card worked immediately and perfectly. Amazon is getting really good at selling trash.
B. t. Nielsen
2025-06-05 12:34:40
Prevents windows from booting, It could be the mobo, but I doubt it, since another card works just fine.
Troy Havard
2025-05-27 16:16:05
I have several smaller sized hard drives but no space ton install them. This card and accompanying cables made it as easy as pie to do. Piece of cake installation and functions without a problem. Highly recommend for anyone needing to expand their HDD storage capacity.
Rick Greenhouse
2025-05-20 16:14:09
let me start this I have a huge case with 5 Disk Drives with 8 HDD's. But my Gigabyte motherboard only has 6 ports and they are hard to reach behind a Nvidia GeForce GTX Titan X Black SC. But I do have more PCIe-X16 and PCIe-X4 ports available. So This card checked all that and I have my boot drive plugged in with the 5 disk drives plugged directly into the motherboard with my 7 HDD's plugged into this card and still have a slot to spare and it's excellent. The quality on the ports are better than some of my no name hard drive's ports10/10 would buy again but I'd need a wall sized computer for that.
Lech
2025-05-04 16:22:36
Did not need to use the included drivers. Windows 11 instantly saw the drives perfectly. The card provides the same speed and throughput that the motherboard does. Totally transparent regarding the way that my system sees the drives.
Jonathan B.
2025-04-30 18:50:53
The last time I set up anything like this it was a driver nightmare. This one was natively supported by Ubuntu 20.04 and required zero extra setup.
Robert
2025-03-15 19:22:22
This SATA expansion card did not work at all, in fact it didn't pick up any of the drives plugged into it, when the drives read perfectly fine when i switched them back to the mobo SATA ports. DO NOT BUY.Buy a LSI PCI-E expansion card and a SFF to SATA cable instead when using TrueNAS/unRAID instead.
paul gallina
2025-01-27 17:55:43
Had to disable fast boot in my motherboard due it to be reliably detected at boot. Other than that works great
Azyr
2025-01-22 16:49:08
Excellent SATA controller for Ubuntu. Works like a charm.
Recommended Products
$295.00
$ 99 .00 $99.00