Your cart is empty.
Your cart is empty.Product Description
Hipa Replacement Carburetor Carburetor for Husqvarna 136 137 141
Carburetor Fits Model:
- Husq-varna 36, 41, 136, 137, 137E, 141, 142, 141LE, 142E Chainsaw
- Poulan 2200, 2500, 2600, 2750, 2775, 2900 3050, PP255, PP295, PP310, PP315, PP4620AV, PP4620AVHD, PP4620AVL, PP4620AVX Gas Chainsaw
Carburetor Replaces Part Number:
- Husq-varna 530071987, 530019172, 530035482, 530029811, 545013503, 530071693, 530071691
- Walbro WT-834, WT-657, WT-529, WT-289, WT-285, WT-239, WT-202, WT-542, W-29
Package include
- 1 x Carburetor
- 1 x Cleaner
- 1 x Fuel Filter
- 1 x Tube
- 1 x Spark Plug
- 1 x Cleaner Backing Plate Kit
- 2 x Gasket
JMH
2025-09-05 20:33:17
Perfect fit, runs great! Great value for money...
Brian S. Paulson
2025-07-05 16:40:31
Overall would recommend. The only issue I had was the gaskets were too small/restricted the choke from freely opening and closing. Had to reuse the old gaskets as a temporary fix until I can get the correct gasket kit to fit a Husqvarna 141. Other than the gaskets - all else fit and worked fine - and was a third of the price than an OEM carb.
Diana DeCota
2025-06-23 13:03:04
The item was delivered a day early, and as described. The carburetor fit perfectly and solved the issue with the saw. It was a good value for the money. It included gaskets, an air filter, fuel line and a new spark plug.
chuck
2025-06-07 17:54:38
The carburetor works great. You will have to make adjustments for it to work properly. These are not hard if you have some skills with small engine repair.
mark l.
2025-05-31 15:22:00
Well to start, the carb choke would not ingage after installing, after 1 hr I figured out it would not engage due to the gasket hole is to small, so it effects the brass looking flap from engaging. We all new the fuel line was to big, according to other reviews, not that big of a deal. I had the proper size on hand. Then if you look at the air filter, the original one, the pice of the filter that is attached to the carb all the time is threaded, the new one is not threaded, the screws slide right through, as seen in picture. So you have to buy 6 dollars in nuts and bolts. To make it work. SEE PICTURES. So I did get it started but it was running rough and a pain to do so without being able to use choke! Once I got it started it ran bad, so I checked the setting on the air mixture screws, well they were adjusted almost all the way out, when you turned them in the saw would not run! According to the service manual the starting point for the air mixture screws is 1 and 1/4 turns out and adjust from their. Well if they were adjusted almost all the way out that tells me the carb was not right from the factory. So I went to a service center on lawn equipment him and I looked it over to give it one last chance of getting it running but with no luck. We determined that the carb was never right from the get go! So after about 5 hrs. I am returning it. I will say I think this is not something that happens on a regular basis. But very inconvenient for me... one more thing the parts in picture that are yellowish are the factory parts, the black ones are the replacement. Hope this helps
Mel Eb
2025-05-19 13:44:44
First impression of this carb replacement kit was good, it had all the parts I needed, however once I started installing it I discovered that the spark plug was not the right size, the fuel tube was the wrong diameter. Not too big of a problem but still irritating. I got everything in place and went to install the air filter and the screws would not mount to the backing plate. So I had to take it all apart and I left the carburetor in but had to put everything else back. Maybe other kits are better, but avoid it if you are looking for the kit for PP4620A.UpdateVendor reached out and found out the problem and has resolved it. The seller is great to work with.
Linda Owen-Rummage
2025-04-15 19:11:31
Was easy for my husband to put on chainsaw
dillon boleen
2025-03-23 13:19:46
Carb was adjusted fairly well. Idle screw needed a half turn and it was perfect. Fuel line didn't fit sadly but still a great price for this kit
JP
2025-02-04 17:41:17
Arrived right on time and after I installed the carb the saw ran perfectly.
Edgar Harris
2025-01-24 17:35:19
Bought a Husqvarna 141 off of FB Marketplace with a deteriorated fuel line, and gummed-up carb. Bought this for $25, and swapped it in, in about 25 mins. Juiced it up, and it started in about 6 or 8 pulls. A small adjust to the idle, and I was up and running.
Customer
2025-01-18 15:37:29
The carb worked fine but the other additional items that came with the kit did not fit my saw.(Husqvarna 41). The intake gasket was incorrect so I had to make a new one. The fuel lines were too big to fit through the tank opening so I had to buy new lines. Additionally, using the nick name "Husky" in the product description instead of the manufacturer's name "Husqvarna" is confusing.
Sylvia Thys
2024-12-03 16:04:40
My Husquvarna 137 needed service.I ordered this kit for my Husky 137. The kit arrived in a plastic bag, not the box shown. Unlike thepicture, the bag did not contain a new spark-plug or a air-filter back-plate. The fuel line was thewrong size, far too large to compared to the one in the husky which meant the fuel filter was uselessas the nipple on the end was too big for the proper size fuel line. So basically, the only usable partswere the carb and the gaskets.The carb and gaskets were correct and I did replace the carb, I had to use the old fuel filter and purchasethe correct fuel line. The carb works well.I would NOT recommend this kit. Just order the parts you need not the kit as it is NOT what you see here.
Terry Paul
2024-11-22 12:37:32
The carb itself works great. The description of what’s included is not accurate. No spark plug and only one fuel filter. The included fuel line is much larger than the original and the tank hole needed to be enlarged slightly.
Recommended Products
$25.90
$ 11 .99 $11.99