Your cart is empty.
Your cart is empty.Product Description
The Remote Indoor Temperature Sensor is used to sense temperature remotely.
From the Manufacturer
The Remote Indoor Temperature Sensor is used to sense temperature remotely.
Brett
2025-09-04 13:30:21
Worked perfectly
Customer
2025-08-31 16:58:21
The price is the best.If someone found better price. Please replay this review with the website information.Thank you Amazon
Brent Davis
2025-08-22 16:55:26
We have these all over our campus on Ecobee thermostats and they work well. We only have to adjust the sensor if the wire run is long. I took off a star because once they are mounted to the wall, the cover seems to come loose with very little pressure—even when we barely tighten the mounting screws.
Jeffrey F.
2025-08-14 17:03:46
This wired remote tells the VisionPro thermostat the temp, in any indoor space, where the remote is mounted. It does not sense humidity. I put one in my master bedroom, because the thermostat was in a non-related hallway (not even served by the same heat pump). You'll need to program your thermostat to use the wired remote temp sensor. If you don't have the installer pamphlet that came with your thermostat, search the model number online and find a manual for installer programming. The code to enter programming is on the back of the thermostat, when you remove it from the sub-base. There will be a sticker with four digits. If you can't run a two conductor cable from your thermostat to this remote temp sensor, you can buy a wireless indoor remote temp sensor, instead. I also recommend adding a wireless outdoor temp sensor. With an outdoor sensor, you can program your thermostat(s) to lock out electric or other aux heat above a certain outside temperature. That's the only way you can prevent aux heat from turning on, when you raise the temperature setting manually by 2° or more. A single outside wireless temp sensor can be associated with multiple VisionPro thermostats in a house. For any of the wireless accessories, make sure your VisionPro has the RedLink feature. (Most do.)
David Burley
2025-06-04 18:08:58
Installed this in a building that had the thermostats located on the opposite side of the room from the returns. It had been this way for 20 yrs. Installed these above the returns and configured the thermostat to look at them. Auditorium temps now stable within 1 degree and most everyone is comfortable most of the time. Completely changed the climate of this building for the good. Very easy install. Does require 2 conductor thermostat wire to be run from the unit to the thermostat.
Mary H.
2025-05-06 10:15:57
Description says wireless. It is not.
Jamie
2025-03-14 14:01:43
This remote sensor was very easy to install. And it helped correct my garage tempature due to the thermostat being placed near door and getting a draft from door
GaryZ
2025-01-15 13:22:42
Bill Henry is correct! This is not the right picture but the description is correct and is exactly what I needed. I think the picture is of the "junction box" that goes with the C7189U if you want to have 4 or 8 remote temperature sensors to use temperature averaging throughtout your house. The RTS is small as it should be, 1 1/2" wide, 2 1/4" tall and 3/4" deep, almost invisible on a white wall.It works great and solved my problem without having to move the thermostat to where I installed the RTS.This was the 2nd time I ordered from Plumbing Planet and again they were great. When I ordered it, the "quantity in stock" said "1" which worried me a little. But I ordered it late Friday afternoon and it was at my front door the following Tuesday using UPS Standard.
The Tech Guy
2024-12-31 17:45:58
This is the perfect remote temperature sensor for Honeywell Lyric T-6 Pro Thermostats.It's easy to install and needs to be hardwired back to the thermostat with two wires.Programming my Honeywell T-6 thermostat to recognize this remote temperature sensor was easy and once installed and programmed my Thermostat now reads the temperature in our bedroom as opposed to the temperature on the main floor hallway. This makes heating and cooling much better in our home and solved the Too Hot or Too Cold temperature issues we were having.Yes I would recommend this sensor ... I just wish it was $25 instead of $50 since there's really not much to it.
Todd Riley
2024-12-30 17:13:26
I ordered these for one of my customers after going to my wholesale heating supplier and was told it would be a month to get the wired sensors. I ordered these on a Tuesday and I had them in my hand That Friday before noon and pretty much the same price more or less. I'm happy
MD123
2024-12-06 14:56:01
Good Precise product
Customer
2024-11-21 10:30:58
Good
Recommended Products
