Your cart is empty.
Your cart is empty. Replace Part Number:Replacement for 40650, Mercury Marine 1395-8236354, 1395-8236353,1395-8236352, 1395-8236351, 1395-823635, 1395-811222, 1395-9599.
Note: There is no manual
CT
2025-08-30 16:19:43
Received everything in description and fit my carbs exactly.
TroutWaffle
2025-06-20 18:35:33
Great kit
Lori L.
2025-05-02 14:27:00
Gaskets in kit we’re ok, but the idle screws in the kit and awash plate screws did not fit the carbs, either too large or incorrect thread pitch. The main jets were not drilled - completely a solid plug. Fuel lines and clamps were to large to fit fuel ports.
Reggie Saucier
2025-04-26 21:40:38
Kits themselves were quality and spot on . The included hoses and clamps were sub par .
delump
2025-04-04 13:51:19
The pros:Gaskets, needle and hose clamps all seem to work well. Fit the carbs correctly without any issues.The cons:The hoses are not the right ID for a 40 hp 2 stroke (2004). Used the clamps and got nothing but leaks. FYI, the correct ID for that year and hp is 3/16. You can use the clamps with the kit though. Last issue with the hoses, there are two places where you need a rigid hose. So it won't kink and to keep it away from the throttle arm. The supplied hoses kink and will not allow you to keep it away from the moving parts.So, considering the cost per carb and the fact I didn't use a lot of the parts, this seems to be an over prices option. If you can find just the gaskets, the float needle and perhaps the float in a kit that's a better option.I didn't use the springs or the threaded needles. Just the gaskets and the float needle. My carbs were really pretty clean.
Ed
2025-03-24 11:11:23
Came with all of the parts I needed and extras for other models too.Each of the fuel filters (3) cost $12.00. This is a great price.
Customer
2025-01-26 17:10:14
Fell into that same crack of shame. 3 carb rebuild kits for less than the price of 1 carb kit from Quicksilver. The carb bowl gaskets fit my WME 3301-824924-C carbs on my '95 Mariner 75 hp Outboard. And lets see what else came that worked, the gasket for the bowl drain, the spring for the idle jet and the gas hose clips (which I like vs using cable ties). The rest of the parts were either not necessary for my carbs or did not fit (wrong threads). Oh and the float valves were too short. The gas hoses were real cheap and I did not even consider using the gas filters after reading all the reviews of them leaking. Recommend, calling Quicksilver and buying only what you need which is gaskets and maybe a idle valve or float valve if the valve tips are worn. Everything else in a carb rebuild is just cleaning.
Doug Goolsby
2025-01-13 16:23:51
Worked as described.. that what counts..
Recommended Products
