Your cart is empty.
Your cart is empty.Product Description
Marquiesha roberts
2025-08-27 14:57:11
At first, I didn’t think it would work, but it did. There was a hole in my blowup mattress. In the vinyl kit repaired my mattress.
Anon
2025-08-07 18:00:37
Did not work at all. Runny and thin like water.
E. Ward
2025-07-25 18:08:25
I used it to fix a large hole in our queen size blow up bed. It worked!
Santa
2025-07-16 20:00:13
Good
Mike J.
2025-07-09 11:32:04
I have never used a vinyl patch kit before so I have nothing to compare to. This kit comes with several larger patches and enough adhesive for probably about 1000 patches, no kidding, it's a LOT of adhesive. I needed to patch my son's inflatable dinosaur punching bag as it was leaking along one of the seams. The patch material is thin and flexible but thicker than what I am patching. As the instructions state, the patch may curl if too much adhesive is applied. I ran into this but it's an easy fix with a paper towel to flatten the patch back out and clean up any excessive adhesive. I couldn't figure out how much adhesive is too much since the adhesive starts flowing upon opening. The adhesive tube is VERY generous and given this, I recommend squeezing some out into the trash before first use or you'll be fighting the self dispensing nature of a full tube. Anyway, I trimmed a patch to the area needed, placed the patch over the leak, folded it in half, then applied adhesive to the punching bag and folded the half of the patch onto the adhesive, holding the now glued half in place with a paper towel while I did the other half. It comes with a rigid spreader that is really made for auto body work, not a soft vinyl patch. I tried using the spreader and that was a bad idea. Instead, I just used the paper towel to even out the adhesive (under the patch) and the patch. The instructions state to lay the patched area flat and put something heavy on top and wait 24 hours. So I placed a 5 pound dumbell on top of the patch. I tested it after about an hour and it appears to be fully bonded but I'm not in a rush. Since I've never used a vinyl patch before, I didn't know what to really expect, but I did think the patch would be cured quickly (less than an hour) and not require 24 hours. But I'll reinflate the punching bag after 24 hours to see how the patch holds since I'm in no rush and want to follow the instructions.
KEVIN SUTHERLIN
2025-05-23 14:54:02
I actually used this on my air mattress and it worked really well!
J. Holmes
2024-12-29 18:14:49
As a liquid it shorted out the sensors on my air mattress and I had to throw the mattress away. Wouldn’t recommend for air mattresses
X
2024-12-19 18:04:07
No evaluation! Do not buy this.
Recommended Products
$15.99
$ 7 .99 $7.99