Your cart is empty.
Your cart is empty.
Features:
Two shapes are available, lightweight upgrade part.
Come with the Hella or IPF logo stickers, looks more attractive.
White light and high brightness, keeps the fun going long after the sun sets.
Suit for 1/24 RC Car Axial SCX24 AXI90081 AXI00001 C10 AXI00004 B17 and so on
Note: You need to fix 4pcs plastic covers inside by glue, otherwise it will fall.
Specifications:
Light Color: White
Quantity: 1Set
Size: 9mm/0.35in
Use Voltage: 4.8-7.4V
Package List:
1 * Set RC Car Light or Light cover
Aaron G.
2025-08-02 17:32:18
I like the added scale realism. The lights function as they should and are simple to install.
Customer
2025-07-17 17:19:54
How about these to use is auxiliary lighting for my scx24, and ended up using them as rock lights on my scale rig and they worked awesome. Just be careful of what glue you use for the lenses, as I did not use the correct glue and the lenses fogged up really bad!
Customer
2025-06-23 11:31:00
Not as bright as the stock bumper lights. Pins that stick out the back are pretty far out. If they were much shorter they would look much better when installed.
Jessica DiCerbo
2025-05-27 10:47:56
Low brightness but decent rock lights
gus Torres
2025-05-24 11:44:52
they appear to be nice quality
Dylan Zirkle
2025-05-09 14:52:34
Decent lights but almost impossible to build the bucket parts and keep them together must use glue and also must glue led into the back of the bucket. Also has lots of wire which is harder to hide on these smaller vehicles
TAYLORMADE
2025-04-13 11:23:53
Not all lights worked
O&F
2025-04-08 12:48:16
Ran the lights for about 30 minutes before one went out. Checked the leads and a wire had broken loose.I did re-solder it, but soon after a second failed, now a third is flickering. Wiring is a light gauge and very fragile. They seem to snap under minimal pressure compared to my stock deadbolt headlamp harness.This light set was not worth the effort.
patrick achard
2025-03-15 15:54:56
Pas chère nickel rapide conforme
ANdoni
2025-02-12 12:17:32
Â
Peter K
2025-02-01 18:32:34
Ware gut schneller Versand
R. S.
2025-01-31 12:54:48
Das Set kommt als "Bausatz". Das heißt, man muss die verdrahteten LEDs in die vorgesehenen Fassungen stecken und die Linsen einklinken. Soweit so gut. Funktioniert aber leider nur teilweise. Bei zwei von vier Fassungen ist der Sitz für die LED und die Linse zu weit. Da hilft nur einkleben oder beim Fahren permanent Linse suchen und LED wieder einstecken. Insgesamt ist die Beleuchtung aufgrund der Verdrahtung auch nicht besonders "scale". Das nicht mit feinstem Draht gearbeitet werden kann ist klar aber es muss auch nicht an jeder LED fast 2 cm Schrumpfschlauch verarbeitet werden.
Recommended Products
