Your cart is empty.
Your cart is empty.Product Description
Small & Powerful
Iroda SOLDERPRO-50 is a popular pocket-sized butane powered soldering iron torch kit.
This multi-function heat tool is specifically designed for the hobby/DIY enthusiast.
Ideal for quick repairs of circuit boards and electronics, at home, in the car or in the field, fits in your pocket and is ready to power on and solder, wherever you are.
Features
Protective Cap with Flint Igniter
Soldering iron can be safely stored immediately after use with a heat resistant protective cap.
The cap incorporates a high-quality flint wheel gas igniter and a very useful pocket clip.
Rapid Heat Up
The SOLDERPRO 50 heats up in under 18 seconds and variable heat control can be adjusted to deliver soldering temperatures up to 842℉ (450 ℃), and a max torch temperature up to 2400℉ (1300 ℃)
Visible Gas Tank
Transparent Gas Tank/Reservoir for easy fuel indication, one refill lasts 40 min at medium temp range.
This model like all models in the SOLDERPRO series is easily refilled with butane gas.
Recommended for :
3D Finishing
Heat Shrink
Hot Knife
Soldering
Sturdy Light-Weight Case
Easy Storage & Portability
The SOLDERPRO 50K Soldering iron kit comes with the PRO 50 Butane soldering torch and 4 high quality interchangeable tips for a variety of applications.
All your butane powered soldering torch accessories are neatly organized and protected in the handy carrying case.
What's in the Box :
- SOLDERPRO-50 Butane Torch
- Safety Cap w/flint ignition
- 60/40 Rosin Solder Core Ø 1.0mm
- Sponge for Easy Cleanup
- 4 High Quality Interchangeable Tips
|
Soldering Tip
|
Hot Knife Tip 45⁰
|
Torch Tip
|
Hot Air Blower Tip
|
|
|---|---|---|---|---|
|
|
|
|
|
|
| Customer Reviews |
— |
— |
— |
— |
| Price | — no data | — no data | — no data | — no data |
| Top | Ø1mm | 2.8mm | Ø7mm | Ø7.9mm |
| Length | 32.5mm | 37.6mm | 18.7mm | 24.9mm |
| Bottom | Ø9mm | Ø9mm | Ø8.7mm | Ø9mm |
Dude from Western WA
2025-08-14 17:30:16
I'm thrilled with this amazing little torch. I've bought many looking for a reliable, adjustable torch for soldering and other uses that is actually comfortable to keep in my pocket and this is the best I've found. This is a tiny little torch with extraordinarily precise adjustability, a thoughtful cap that attaches to both ends so you don't lose track of it, with a perfect tiny but effective foldout stand and helpful selection of tips that all even fit into a handy little case so you don't scatter the peices and lose them. These guys have managed to get just about everything right on this and I'm glad to have found it. My only word of caution is to note that this is intentionally a small torch with, necessarily, a low flame output so if you want or require something with a high output then this one isn't for you. In that case I highly recommend either of the two Dremel offerings sold on Amazon along with RAV as they both offer excellent products and superb customer service, but neither has a truly pocketable offering like this excellent product.
MrRight
2025-08-13 17:50:47
Awsome! Love my cordless soldering/ torch/ hot knife/ heating Iroda
Melissa Hunt
2025-06-16 12:01:46
What a great torch.. I can't saying enough good things about this little beauty.. I've used them for more than a decade, and all I really need to say about it is that you can't improve on perfection. Only advice I'd want to give others is use premium butane, that's PREMIUM BUTANE. And the reason for that is, because it's fine tool but if you've ever taken one apart then you would know the fuel line is extremely small. What I mean is the line itself is a thick tube but inside diameter is very tiny. So, if you use crappy butane, then I promise you after three or four times of use it will be clogged and will no longer work properly if it works at all. USE PREMIUM OR BETTER, OR YOU'LL REGRET NOT DOING SO. Otherwise should last a long, long time. I had one I was using for more then five years. Because of clean butane.. I've also had them last five minutes due to crappy cheap dirty butane.
Dustin Evans
2025-06-07 18:50:02
I loved this thing for the first hour Of use I put on this soldering iron. After that first hour though. Not so much. For whatever reason after I fire it up and it’s been sitting for 30-45 seconds warming up, the flow of butane goes very erratic and will completely go out. Unless I start to fluctuate the small lever up and down. I’m not sure what would cause this to happen. I treat my tools very very well. With that in mind, I bought the best butane I could find. It’s made by Xikar. I was debating buying another Iroda to keep with me at work, but I decided to hold off, for now, to see if the one I have gets better after using it for a while. Only time will tell. If you're looking for a soldering iron you can use anywhere I would try to find something other than the Iroda.Edit: I have owned and used this Soldering Iron for a while now. I am more happy with the soldering iron than I was initially. It’s still a little temperamental and consumes fuel pretty quick. It is However very convenient for small jobs where you don’t have a power source very close and/or it would take longer to get cords strung out than the soldering will take. I would recommend the Iroda soldering iron, just make sure your expectations are in line.
Thomas S
2025-05-17 17:36:18
I actually had an exact replica of this item but from Radio Shack and in their brand, about 8-9 years ago. I wanted to get another one, but RS is unfortunately gone, so I found this one that’s exactly the same, so a perfect replacement! Perfect for use in the field or travel, especially to places where electricity is not available. It’s super-portable size means you can comfortably take it everywhere with you.
Traci
2025-05-13 20:15:46
I was excited when I received this soldering iron because of its small compact size. However, when I ignited the iron a blue flame shot out about an inch on each side. Returning item.
Shygirrrl
2025-04-24 18:16:09
While I don't use this for soldering the chisel tip works perfectly for what I bought this for which is making needed holes in SEG that will not cause it to fray or come apart... It is extremely accurate once warmed up to the proper temperature... And will make even the most specific of shapes it is like drawing with a pen
NELSON
2025-04-22 15:22:57
Easy to use, i use it for crafting in the house, small things but its stopped working
fred m.
2025-03-18 11:57:03
done the job thanks
Aramis
2025-03-09 18:04:22
Like it I was waiting for this for a long time now I can do some work with good products
Michael B
2025-02-06 17:40:00
Good item
nathalye st laurent
2025-02-04 16:05:38
Très bonne qualité
wayne
2024-12-28 12:17:39
It seems a very handy little soldering gun for the money, my only criticism would be the case is flimsy, but I have a 3d printer measured up and made my own
Recommended Products