Shopping Cart

Your cart is empty.

Your cart is empty.

KAISH American Thread Humbucker Pickup Height Screws Humbucker Pickup Ring Pickup Surround Frame Mounting Screws Springs for USA thread pickups Black

4.6 (13) Write Review
Free shipping on orders over $29.99

$6.99

$ 2 .99 $2.99

In Stock

1.Color:Black


2.:Metric Thread


  • Pickup Height screws are Imperial/USA thread which can fit most (not all) Gibson/EMG/Seymour Duncan or Dimarzio Pickups
  • 4 Pickup Height Screws Dimension: 28.4mm(total length including head) x 2.9mm(thread diameter); 8 Pickup Frame Screws Dimension: 17.6mm(total length including head) x 2.5mm(thread diameter); Pickup Springs Dimenison: 26mm(Length) x 4.7mm(Outer diameter) x 3.3mm(Inner diameter)
  • Due to the wide variety of pickups and screws in the market,please be sure to verify the dimensions carefully before you order the item; We can not promise these screws would fit all the Epiphone Les Paul Pickups or Humbucker Pickups made in China
  • Important Note: Please be sure to confirm the thread type of your pickups before you order the item, you may not be able to find the correct screws if you don't know the thread type of your pickups
  • These are just after market pickup screws, so the screws and springs may not be exact same with your original screws and springs; We only produce quality guitar parts and accessoroies, we don't make inferior parts or accessoroies


KAISH American Thread Humbucker Pickup Height Screws Humbucker Pickup Ring Pickup Surround Frame Mounting Screws Springs for USA thread pickups Black


J. Miller
2025-09-04 21:31:23
The Phillips screws on the humbucker height adjustment screws on my import es 335 were stripped when I got the guitar and the mounting rings were put on backwards at the factory. I could barely get the old screws out with no prayer of reusing them. I ordered replacement screws from stewmac but they were too small for the pickups (obviously for US humbuckers). I was ready to order new pickups after exhausting all avenues for other screws when I saw these import replacement screws on the Zon. They arrived today and they were a perfect fit and much higher quality than the originals. Saved me a ton of money. So glad I found them.
Brad Eggum
2025-08-31 17:17:23
Humbucker screws black, Emg pickup, 86 Hammer SSII.Fit/ function perfect.Black paint wore off real quick, amounting to chrome screws. Other finish options diy will last longer. Or not just shooting black paint on chrome, anything but that will last longer. All good, they are new and fit, my old screws had nothing left in the screw heads to grab with a screwdriver: wear corrosion. So I am happy to be able to adjust/ remove pickups again, which is more important than finish black, chrome... Wanted stainless, couldn't find, That's all that would be better w/ diy oil rub finish (using torch...) For me, anyway 😁
L. Schwalm
2025-08-11 11:53:24
I love Kaish stuff so far. I bought the metric. I drilled out my pickup with an M3x.5 combo drill/tap bit and it worked perfect. It'll take a 2.5m drill with a tap if you don't have the combo bit. Just buy a combo set. They're cheap enough. Looks very good with a short medal pickup ring.
Trey
2025-07-28 17:27:42
The screws are smaller then the originals that I was replacing.
Rosey Carlson
2025-05-31 10:17:22
In perfect condition and exactly what I wanted.
David
2025-05-09 18:19:24
Fast shipping, great price and product!
WP
2025-03-08 13:11:49
Wrong thread size
Monzos
2025-03-03 11:35:54
Got these for the springs bc when I bought my guitar new it had that plastic film over the pickups. Well, I decided it would be a good idea to raise the pickups as far as they could to get the plastic off.. little did I know bc after that my pickups weren't sitting in there snug anymore. Took them off and I loosened them then tightened them I thought something was stripped but then I noticed the spring was losing tension after a certain height. The springs are worth it instead of sliding a pick in your pickup to keep it steady.
Mr. Kelvin Griffiths
2025-02-12 18:54:16
Needed. Import sizes screws, so have ordered them , hopefully they'll fit!!!
Ruben Klassen
2025-02-08 14:55:52
I thrifted a Vantage 700VP for $80 (what a steal :D), and the old hardware was corroded and made the guitar look awful. This set of hardware made the humbuckers look good as new if not better! I mistakenly ordered the metric set first time, assuming this Japanese made guitar would use Japanese hardware, but I was wrong, as the bolts for the humbucker height adjustment were too wide to fit the threads. So I ordered the imperial set and everything fit nicely. Very happy with the result!
Thomas Rutherford
2025-01-28 15:00:06
Fit perfectly in my 1987 Gibson SG Special. No modding or anything everything was snug!Will grab more if needed for another guitar
Alessandro Cefalu
2024-11-23 21:40:24
Bei 3 von 4 der Befestigungsschrauben ist der Kopf wie Gummi runtergekommen. Die anderen hab ich gar nicht mehr probiert. Jetzt stecken die Schrauben in Korpus und selbsgebautem PU Rahmen fest und ich kann sie nur noch mittels aufbohren oder so raus bekommen. Dabei riskiere ich dann Schäden am Instument zu hinterlassen. Ärgerlicher geht es kaum noch.
Albert
2024-11-22 12:16:51
No obstante me arriesgué y las pedí al leer en algunos comentarios que no funcionaban en Gibson y alguno que sí en Epiphone. No sirven para las Probuckers Epiphone, ni tampoco los tornillos del frame son de la medida que lleva la Epi.SÍ son medida Imperial/US como se indica en el nombre, y NO es métrica como se indica en la descripción.Le doy 3 estrellas porque el envío fué muy rápido y el producto parece bastante correcto.