Your cart is empty.
Your cart is empty.Product Description
BRASS BODY
Brass body construction provides much higher performance (high heat-resistance and pressure-resistance) and durability than plastic ones. Showerhead valve can serve many years without leakage, multi-layer chrome finish, built to resist daily rust, corrosion, and tarnishing.
STANDARD FITTING
Both the male and female threads are G 1/2 which is suitable for the standardized handheld shower, wall mount shower head, or bidet sprayer.
Easy Installation
Easy to add this valve between shower head and shower arm, wrapping teflon tape on the threads for a better tight seal.
Easy Water Flow Adjustment
Our shower flow valve is designed to adjust the water volume to your liking or completely shut off the water flow.
Mitch - B
2025-08-30 14:05:32
Took less than 2 minutes to install on the end of my hand held shower between the end of the hose and the shower head. I did not need tools and it did not leak. Water flow does not appear reduced and I use a Shower head with 10 settings especially the pulsating portion. Does not leak at fittings and can easily regulate the flow with one hand by sliding the lever side to side. Flow goes from full on to full off (without leaks at any location including fittings) but you must use the gaskets at fittings if called for. Strongly recommend that at the END OF YOUR SHOWER, you shut the water off at the wall mounted shower control instead of relying on any device like this to shut off the flow as it is never a good idea to leave a any hand held shower hose charged as the water line pressure can be up to 60 PSI). As the valve with hold the 60 psi water pressure but the hose may not if left charged all the time. By the way this device is a little shorter than the one bought at the big box store and fits very well in the normal size hand held shower wall holder and slides in and out very easily. This is a great buy and well designed.
Davis
2025-08-25 18:31:48
This little valve really works great. My favorite part is that I can slow water flow down as well as turn it off altogether without having to mess with the main faucet. My shower head has a fast and heavy flow and it's great to finally be able to slow it down. As a handicapped person this gadget really helps me in the shower, I can turn it off and on with so much ease now. It was super fast and easy to install, it's easy to use, and I'm happy with the quality. Will buy this again if it ever wears out.
Szoo2
2025-07-20 15:39:44
My water bill told me that my usage was above average for a dwelling of our size. California currently requires 2.5 gal/min or less on all showers and sinks. Next few years that standard may be reduced to 1.5 gal/min. This valve can control flow as needed. So instead of installing expensive new fixture with required flow restrictions, this can meet standards as they change. No need to retrofit later.So does it work for the intended purpose? Yes, indeed is the short and definitive answer. It does not come with any instructions but it's pretty much straight forward. The package came with the valves body and a rubber washer. Not sure where the washer is designed to go, so I chose to put it on the output side. Using plenty of white teflon pipe tape and channel pliers, I first mounted the shower head on the valve, as there is little room between the shower head and valve to access once it's on the inlet pipe. Then using generous amount of tape, I screwed it on the inlet or supply side pipe. Stuck a 5 gallon bucket to measure flow in the shower and "tuned" the flow to 2 gal/min. less than the standard but may get me back to average or less than average water user. Works wonderfully, no drips or leaks, fully adjustable. Once I have it tuned, I scored the place where the lever needs to be set. Now I can reduce it further as the need arises and not have to do anymore plumbing.
Bill B.
2025-07-13 14:44:22
Fits perfectly and works well
S. Smith
2025-06-12 17:47:16
Aside from some delivery issues with USPS (getting worse), this is a great shutoff! I have fairly high water pressure, and this shutoff is still nice and easy to operate. It does allow you to go from full flow to zero flow and anything in between. Control knob and body are metal, while the valve component appears to be nylon. One thing I'm always worried about with cutoffs is too much flow restriction when open, this unit does a pretty good job of allowing close to maximum flow....better than any others I've tried.UPDATE**Maybe I got lucky ...twice, but I haven't had the issues others are reporting. After using this for a few months, I still love it. It's so much smoother than the others I've tried, and the 'leak' is really tiny. The minimal effect on water pressure, and no effect on water temp make the tiny tiny leak a mute point.
CW
2025-05-28 13:41:32
Well made, easy to cut the water off and turn it back on.One problem: as hot water flows through it the flow is gradually reduced to perhaps 25% of what it initially was. For example, if I turn the hot water valve on by itself to a typical flow through the shower head, over a minute or so the flow continually drops to not much more than a trickle. I have to open the hot water valve much wider than normal to get a normal flow of hot water.It's definitely the shut-off valve, as I removed it and did not see a reduction in flow without it when hot water was running through the shower head.No idea what may be causing it. Perhaps something in the shut-off valve is swelling due to the heat and restricting the flow.
Robin
2025-05-17 17:19:30
Wish I had purchased this 20 years ago! This valve doesn't restrict your water flow unless you want it to. Its purpose is to have an easy and quick way to reduce or completely shut off the water while in the shower so you can lather your hair, shave your legs, etc., without tons of unused water needlessly going down the drain. It's so simple to install and it works like a charm. The lever on the valve is smooth and effortless. You can turn the water volume down a little, a lot (or anywhere in between) or shut the water off completely while using the shower. I love not wasting so much water. This will save me far more than the cost of this item in a very short period of time. I use mine with a shower wand/massager. This is one of the best things I've ever purchased.
GeneMCO
2025-03-31 21:13:39
This is exactly the ticket for installation in an RV shower head! Complete water shut off and no dribble!For those of us who dry camp, conserving water is important and efficiency showering is a must.I installed this unit at the shower valve for rigidity and the shower head hose off of it. Mix my water temp and shut off this valve.Lather rinse repeat! No wasted water!With ceramic discs as the shut-off mechanism, this well-built chrome valve should last me a lifetime!
Joey Letourneau
2025-03-17 18:35:52
Works great, 100% stoppage of water. Save water :)Easy install with Teflon tape.5 Stars!
Eric
2025-03-08 16:24:07
Sturdy and feel good to the touch. Easy to use and smooth operation. Even came with a mini PTFE tape for installation. It says additional warranty up to 3 months but the date on the card coming in the box was almost 6 months ago (probably leftover stocks). Well, it’s not like I need it anyway.
daysailor
2025-02-09 17:42:38
Nach ca. 3 Wochen täglicher Benutzung bin ich mit dem Produkt sehr zufrieden. Das Produkt macht einen hochwertigen Eindruck. Ich habe das Ventil zwischen Handdusche und Schlauch geschraubt und das Ventil lässt sich einfach mit einer Hand beim Festhalten bedienen. Es ist leichtgängig, schließt vollständig und vermindert auch nicht merkbar den Wasserdruck. Ich stelle jetzt beim Einseifen/Shampoonieren etc. die Wasserzufuhr damit kurz ab, spare ⅓ bis ½ der Wassermenge und muß beim Wiedereinschalten nicht umständlich wieder die richtige Temperatur / Wasserdruck einstellen. Ein echter Gewinn und der Duschkopf passt trotzdem in die Aufnahmehalterung.
Jag Själv
2025-02-07 13:00:54
Ok
Cristian
2025-01-22 16:30:09
válvula con buen material. cumple su función, no tiene perdidas ni óxidos.
Recommended Products