Your cart is empty.
Your cart is empty. Specifications:
Model: ST-2070
Leg Tubes Material: Carbon Fiber
Round Based Material: Metal
Height adjustment range: 40-71cm / 16-28in
2 Sections Legs diameter : Φ25,Φ22mm
Load Capacity: 15kg / 33lbs
Weight: 0.92kg / 2lbs
Package List:
1 * ST-2070 Carbon Fiber Rod
1 * Round Base
1 * Wrench
Kareem Brown
2025-09-05 10:19:13
Works great. I use it on a desk and it doesnt take up much space.
Gary
2025-09-02 18:52:56
Really nice product, just make sure you have room. The base is about 7 inches wide and hefty, so this really isn't super portable, but a great unobtrusive way to mount LED lights to your desk with a fraction of the space of a light stand. I tested this at full length with a 60W L60-B by Westcott and it held just fine at full length. I then stress tested it with a very heavy Nanlite FS-300 300Watt LED...it held, albeit it was wobbly, but the stand kept it upright when I tried to nudge it for a controlled fall. Do note, it's not a good idea to put a heavy light like a 300 watter all metal on this...but I did it for SCIENCE LOL.Just be honest and not stress it out too much, but seems like it will take most portable LEDs, even COBs at full length. What's great is it includes a baby pin in addition to 3/8 and 1/4 threads, and the pins are removable...no more cheap stands where the baby pin is pre attached and becomes loose, but you can't tighten it because it's bolted...YAY...This is merely a quick pin replacement if something happens. But this is one of the better cheap stands available on Amazon and I was expecting typical schlock that would hold a USB tinker toy light at best before breaking...no this is legit.So this punches above it's weight. The only downside is the middle clamp is plastic, so be sure to baby it a bit and not go nuts. Bring on your Aputure 60xs n' Nanlite Forza 60s and Neewer MS150s.
Sound Hound
2025-09-01 17:34:17
Yes, it is a great table stand for cameras, lights, or microphones, but this assembly's star is the carbon fiber extension pole. It works with the round base stand provided and can be used as an extension pole for your tripod or other devices. I put it on a dolly to create some movement for product shots and the height adjustment came in very handy. I might not want to mount a heavy rig to the stand and extend it to the limits of the pole but overall this is a useful device and the extension pole will find its way onto other tripods and dollys I own.
Avid83
2025-08-20 16:20:57
I really like that this monopod stand uses a metal flip lock rather than a collar for extension. It also has a set screw at the top to minimize rotation if a ball head is installed. There is a hex screw at the top that can be removed to change the default 3/8†mount to a 1/4†mount. A hex wrench and 5/8 stud are also included.There are a few ways you can use this monopod stand, but it was most practical for me as a light stand for a small LED fixture. I think it would also work nicely to mount a light and put it behind a laptop for video conference calls.I only have a few nitpicks with this monopod stand. The metal base had a scratch on the top and it could be slightly heavier. The carbon fiber while good looking, could use thicker tubes. Otherwise, if you don’t overload this stand, I think it is a good value considering the generous height extension and carbon fiber build.
Bruce Richardson
2025-08-08 16:04:46
First of all, let's establish that this is a good quality stand. The carbon fiber sections are well crafted, and the lever-lock clasps the tubing firmly. Additionally, there's some kind of guide within the tube mechanism that does not allow the tube to twist, which is a nice feature for keeping things aligned.Also, the value is excellent. For any small light, camera, or other bit of photo apparatus you need to mount, this will work great.I was very pleasantly surprised, in fact, at the quality. There's nothing about it that isn't well thought out and designed. Bravo. Five Stars!!
Rob M.
2025-06-26 14:38:00
This is a professional product designed for professionals or anyone else who is looking for unsurpassed quality and workmanship. I can't say enough good things about this carbon fiber tabletop stand; it's that well made.Whether you're mounting a camera, a light or something else, this stand is rock solid with a heavy metal base and a quick release lever that makes adjusting its height a breeze. Super convenient stand with a reversible ¼"-20 ⅜"-16 stud.
Chris Hilton
2025-06-13 18:53:00
I really enjoy using this stand. The lightweight carbon fiber construction is really a plus. The metal levers that secure the center column are really well made and lock with a very positive feel. The base is metal as well and has very well placed feet under it to help prevent it from moving.I've loaded a good amount of gear onto this and it's always been up for the challenge.If you need a stand at a really reasonable price, this is your option.
Jay S
2025-06-08 19:43:38
The media could not be loaded.
Fco. de Borja del Moral Torres
2025-06-01 12:26:35
Pesado y robusto... Justo lo que buscaba.
Andreas
2025-05-12 13:11:13
Ich nutze es als Tischstativ für eine Kamera oberhalb des Monitor.Ein 4cm Kugelkopf hält die Kamera Canon EOS M50.
FABRIZIO-FOTOGRAFO
2025-03-17 14:16:53
Purtroppo nella realtà è un "giocattolino" e regge poco...
Paul
2025-02-17 13:46:20
Robust, with an adequetly counter weighted base; aiding overall stability.Highly recomended!
bakser
2025-01-07 17:58:51
Gut
Recommended Products
