Your cart is empty.
Your cart is empty.Product Description
Korky StrongARM Tank Lever Faucet Style Handle - Designed to fit the majority of toilets, the Korky StrongARM handle and lever easily adjusts to fit all tank positions including: front, side, angle, right and down. Optimized for use with both 2 In. and 3 In. flappers and canister-style flush valves. The engineer grade material in common stress areas performs as well as brass and aluminum levers. The StrongARM lever is adjustable to eliminate the need to bend for fitment and fits most popular brands, including American Standard, Kohler, TOTO and others. The faucet style handle is a great way to upgrade any toilet and compliment the bathroom's decor. - Finish: Oil-Rubbed Bronze, Material: Plastic, Pkg Qty: 1, Package Type: Card WARNING This product can expose you to chemicals including hexavalent chromium which is known to the State of California to cause cancer birth defects or other reproductive harm. -
From the Manufacturer
Designed to fit the majority of toilets, the Korky StrongARM Handle & Lever easily adjusts to fit all tank positions including: front, side, angle, right and down. Optimized for use with both 2” & 3” flappers and canister-style flush valves, the engineer grade material in common stress areas performs as well as brass and aluminum levers. The StrongARM lever is adjustable to eliminate the need to bend for fitment and fits most popular brands, including American Standard, Kohler, TOTO & others. The faucet style handle, in a oil-rubbed bronze finish, is a great way to upgrade any toilet and compliment the bathroom’s decor. Easy to install, the 6081 includes: (1) Oil-Rubbed Bronze Handle, (1) Tank Lever Arm, (2) Locking Clips and (1) Stainless Steel Lanyard Hook.
Dave
2025-08-31 13:27:59
This Korkey flush handle is really a quality product, especially at this price point. It’s attractive and hefty brushed nickel finish, along with its innovative engineering puts it at the head of the class. I installed it on an American Standard Cadet series toilet (see picture). What an improvement over the all plastic factory handle. Although I could have installed it without directions, I’m glad I took the time to fine tune things and incorporate the provided installation tips.. The suggestions relating to my 4 inch flapper (i.e., high output) and suggested 30 degree down angle of the chain arm. These tweeks resulted in an effortless and efficient flush. The fact that the complete mechanism breaks down into three parts makes it easy to install, pre-test, and adjust. My only issue is with Amazon. The factory packaging was torn open. Luckily nothing was broken and the mailing envelope caught the loose parts. Gotta give it 5 stars! P.S. The 5 year warranty is another plus.
Arby
2025-06-05 17:43:43
Beautifully designed for easy installation and long-lasting use. The look is top notch, nearly matching my expensive faucet handles at 1/6 of the price of the manufacturer's. Fits my Kohler square hole like a glove. Note: follow the directions on the small folded sheet in the package because it doesn't install like many lower quality ones. It's much easier!
Sly
2025-05-22 17:48:40
Incredibly well designed! Installed in minutes without any tools Adjusts to the shape and height of the toilet tank in seconds. I am a retired general contractor and have never seen anything like it. The handle is solid metal (heavy) and the arm will probably last for generations.Some say the arm is too short. It is short but not too short for my Kohler. If you have a very old toilet with a extra-large tank, it may not be long enough.
Gwendolyn7777
2025-05-04 10:34:55
Yeah, very well made, and my oil-brushed bronze choice was very nice looking and matched my bath fixtures perfectly.I HAVE installed many toilet handles in the past, and this one was NOT easy. It LOOKED easy and the instructions were perfectly clear, but my particular model of toilet didn't want to easily fit this handle for one, but the worse part was the durn little clip for the chain. The was its made, it was almost impossible to snap onto the arm of the handle, and you certainly cannot snap it on while the handle is attached to the elbow, you will have to attach the clip first and then attach the arm back to the elbow. This makes it difficult to get the correct length of the chain you need.Finally, I got it installed and it works fine. No exactly like I would like, the handle kinda bounces back hard after you let go, but that may be installation issues.
Anon
2025-05-03 16:08:46
It's a goofy thing to review a toilet flush handle but here we are. This Korky oil rubbed bronze handle looks nice and has a decent weight to it. Install is easy and had almost endless adjustability. The issue however lies in the design. It is sloppy when installed, the tolerances are just too loose, the handle is sloppy and wiggles back and forth. I never knew this was a real first world issue until I replaced a OEM handle with a Moen ($25). That handle had very tight tolerances and was just so smooth to operate. The primary difference is simple, the Moen handle uses a thumb screw to secure and tighten the arm aperture instead of a retainer clip. If Korky adopted this design feature so you could tighten things up and the handle wouldn't be so sloppy when installed it'd be a 5 star product. Unfortunately that particular Moen handle also protrudes out about half a inch too far and the toilet seat on my slimmer tank hits it and does not open all the way. This Korky handle is lower profile and fits nicely solving that particular problem.A workaround for the sloppiness of this handle is to either use a O ring between the gear where the arm attaches and the main body screw retainer, or as I did, wrap some teflon/silicon tape in the gap to sort of make a makeshift O ring. Then to further tighten things, use teflon/silicon tape in around the primary retainer screw. This helps a lot but isn't perfect. Ideally Korky would redesign it to use a thumb screw instead of a retainer clip and use a O ring.Anyway.. it's a toilet handle, it's easy to install, it flushes, and it looks nice. But, it's got a bit of wiggle when you jiggle.
Nina
2025-03-07 17:52:12
Me encantó!! Quedó perfecta en el tanque del sanitario y fue muy fácil de instalar. La volverÃa a comprar definitivamente que siii!
Eng
2025-02-09 12:47:53
Changed the flush system on my toilet. The new system needed a spring loaded handle and this did the job. Not cheep but functional and should last. Happy enough with my first installation that I will repeat on a second. Hence purchase number two
King
2025-01-22 13:34:26
Very easy, tooless installation.Like the clip design.It's sping action, which makes it 2x easier to flush.It's not fully flushed witb the toilet, but that's an easy fix.So far it's as advertised and seems of good quality
Stephanie
2025-01-07 14:13:41
I brought brushed bronze. In pictures it look like the antique bronze/brushed bronze I'm going for but in person it has a reddish and silverish tone to it. I'm still thinking if I want to return it. To give some perspective, I'm going for a modern farmhouse style, looking for brushed antique bronze accessories to add some warm. I'm giving this product a 5 star for those who are ok with that undertone, the quality of the metal has weight to it and the lever does make my toilet look a lot more classy.
Duncan P.
2025-01-02 14:50:17
Worked great with a Kohler toilet with front flush handle. Love it!
Recommended Products
$33.85
$ 16 .99 $16.99