Your cart is empty.
Your cart is empty.Product Description
Every house equipe with toilet as a must necessities. It is cost a lot for changing the whole toilet or pay for a professional repairer when your toilet got some problem such as switch do not work normally. Then this type of Jmkcoz flush handle do solve your problem easily. It has great material that does not rust and quite easy to install.
Specifications:
Material: Metal Plating Wrench+ Copper Lever
WRENCH WIDTH: about 8cm 3.15 inch.
Lever length: about 21 cm 8.3inch
Color: gold lever + silver wrench
Easy To Install
This handle is quite easy to install, does not need more tools. The wrench is designed with counterclockwise rotating for fixing. There are three holes in the copper lever which allow dofferent position for installation.
HOW TO CHOOSE A PROPER HANLDLE
Our flush handle is applicable to many toilet models: TOTOCW844RB CW864B CW854RB CW764BT400/SW764B CW764BT305/SW764B CW744RB/SW743B etc.
Our product is for side switch as our picture shows. You can check the swithc position of your toilet for correct option. Please make sure the this Flush Lever Handle suit for your toilet.
Durable Material
This handle is made of high quality plating metal and copper lever, with sdelicate urface polishing plating,makes it looks upscale, Suitable for bathroom environment and corrosion-resistant. Strong and durable for long time use.
FUNCTIONAL FOR HOMEUSE:
This Side Mount Toilet Lever Handle is suitable for Square mounting holes,flush lever locknuts have a reversed screw thread, which can help prevent loosening over time and provides a quick installation on the front, side or at an angle on the tank, arm can be bent or cut as needed.
Super D
2025-08-10 16:12:16
Pleasantly surprised the handle is metal, not plastic like the one I am replacing. Seems very well made. Was easy to install and works great.
Mike
2025-08-07 10:24:46
This is only Day 1, but so far so good. I have a twenty year old Toto toilet with no visible model stamp in the tank. The diagram for this one looked a lot like the failed part so I took a chance. I did have to slightly bend the rod to gain clearance around the installed Fluidmaster fill valve but, thereafter, I got an entirely satisfactory result. I, also, had to remove the black gasket that is intended for a snug fit into the tank lever hole because it was too large for my toilet.I had replaced the lever years ago at more than twice the price of this Jmkcoz part so that was a nice surprise in the midst of the current surge in inflation.
Marty
2025-07-23 10:35:55
I needed to replace the handle to my toilet and found this online. It was easy to install, although, because of the shape, took a little creativity to insert it.I will say, it felt a bit cheap. The old piece that was removed felt more sturdy than this. I’m not sure how durable this will be over time, but worked in a pinch.
DJSFO
2025-06-12 18:54:44
Replace the existing one I had and fit perfectly without having to be adjusted.
GIRI SHREENIVASAN
2025-06-11 21:21:15
The item is flexible and works well
D Jones
2025-06-10 10:20:42
This is the bomb! Toto builds a crappy handle mech. and the new lower price of $21 on Amazon is still stealing! Get this thing instead. It is an identical duplicate EXCEPT that the nut is easier to use. The rod for my cst-743s (i.e. the Drake) is about 1" longer than this one, but I installed this one anyway on both my toilets and bent it to the same shape and position as the original and it works just fine. This one includes the new beefed up point in the handle, just like the latest ones Toto is selling.Oh, and this one has a slip on rubber piece to make the handle fit tighter in the square hole of the tank. I was able to use it on one of my toilets and it makes a much nicer install - much better than factory. The other toilet hole was too tight - so it only fits as good as original, instead of better.AND, if you prefer, you can simply SWAP the rod and plastic mechanism from your old Toto unit to this new handle and you don't even have to bend the rod to fit. You can even use the new square nut. Forget paying Toto - if this one breaks, I lost $7.99, it the Toto breaks, I lost $21 to $33.By the way, I noticed several Amazon sources for this unit - I believe they are all the same.
Customer
2025-05-23 10:39:54
I had to install it without the square rubber insert in the tank wall because it was too tight. I also had to tweak the brass rod a bit to get the flapper to not allow the water to run constantly.Let’s see how long it lasts. If I’m not pleased with it I’ll just buy the real TOTO handle and update this review.
Fred Davis
2025-04-24 15:26:53
This will work on just about any traditional flush toilet. You may have to partially disassemble to rotate the brass rod 180 degrees To clear he flish valve apparatus. But this is easy enough to do. Remove the chrome handle by unscrewing the plastic piece pop the rod out by pushing the brass rod out of the plastic piece. Don’t lose the pivot pin. Roll the brass rod over 180 degrees and push it back in until the pin is reseated in the white plastic tube. Then reinstall the chrome handle on assembly. Take the plastic nut off. Insert it through the side of the water closet. Install the nut and tighten it just past finger tight. Connect the chain to the flush flapper valve.
A D
2025-04-18 10:28:34
Nice product. Good quality. Works fine ao far
Customer
2025-04-16 16:06:23
I bought this after reading the latest review posted.I had a sticky handle because the plastic nut was worn out. I got tired of having to make sure the handle did not stick after each flush to make sure the water was not running 24/7. A pain really so I had to replace it.This one came with a square black washer which I did not use as it was too wide and too soft. I replaced it with a black plastic washer that I had in my toolbox and it works great. The washer goes against the inside of the tank and this plastic nut tightened against it. Works much better than the square washer that came with it.No more sticky handle - took me less than 10 minutes and I did it myself .No plumber or handyman required.
Dr. Tim Parker
2025-04-02 16:01:46
When the nut holding the flush handle on my Toto stripped, I looked for replacements. Considering the high cost of an official replacement, and the fact I wasn't sure what model toilet tank I have, I looked at these third-party replacements as a potential solution. Removing the old flush lever was simple, but the first attempt at replacing it with this Jmkcoz handle necessitated bending (carefully) the flush extension both outwards and downwards, and ignoring the rubber spacer they included in the kit (not enough space for the spacer). Total time to install was about ten minutes, with some careful bending to make everything work smoothly. The result was great: the new handle works perfectly, sits flush to the tank, and has worked without issue so far. Considering the difference in price between this Jmkcoz handle and the official Toto handle, it was well worth the attempt with this third-party handle! If you're even slightly handy with tools, this is an easy install.
Customer
2025-03-09 14:02:32
Used for toto one piece toilet
Sbest543
2025-02-05 12:16:02
This saved me so much money and it was easy to install (replaced a broken one).
Recommended Products