Luxe Bidet is very easy to install. Does what it is ment to do perfectly. It has a self clean sprayer setting. Continously adjustable water pressure setting which at it's higest setting has a lot of force. My wife loves the femine wash setting. We use a hand towel to dry off and only toilet paper if unsure how well the bidet did. This should greatly reduce your use of toilet paper wich at 50 cents or more a roll will pay for itself in a couple of years or faster with a big familyVery well designed unit. They have a heated water version if you live in a cold climate. I highly recommed. Wish I bought it sooner makes that buisness of my life more through and cost effective and green.

I had previously owned a toilet seat with a built-in bidet that worked just fine, but never really fit my existing toilet perfectly. In addition, the nozzles - although "self-cleaning" - were in a pocket that would mildew over time and be challenging to clean. When the seat itself began to wear, I decided to reinstall the toilet's original seat, and so looked for a bidet attachment. After experience with the first bidet, besides overall performance what was important to me was good fit, low profile, and ease of maintenance. This attachment checked all the boxes. Installation was simple, the original toilet seat fit just fine, the control panel was not overly big, but the best feature was the design of the nozzles and self-cleaning features - which I expect will make this easy to maintain. And the overall performance is just fine. This attachment is a little pricier than other attachments, but to me the self-cleaning features (including the hinged attachment) were worth the extra investment. One note: I had a t-valve with a switch on the old bidet and left it on to use with this bidet. The t-valve connection I had is 1/2" and the hose that came with this attachment is 3/8". Obviously if you use the hardware that came with the attachment it's a non-issue, but if you are using existing hardware, check the size. I had to buy an inexpensive adapter to continue use with the switched t-valve.

The LUXE Bidet NEO 185 Plus is a great product. It is very easy to use, straightforward installation, the water spray is good and it has a hinge to lift the bidet for easy toilet cleaning. Most toilet seats will fit without the need for bumpers. Installed on all three toilets in our home. The LUXE is much better quality than our last bidet!

The LUXE Bidet NEO 185 Plus is a simple yet effective way to add clean, comfortable washing to your bathroom routine. I installed this in under 20 minutes, and it fits securely under the toilet seat without shifting thanks to its innovative sliding hinges.The dual nozzles provide both rear and feminine wash options, and the 360° self-cleaning feature helps keep it hygienic. The water pressure is adjustable, allowing for a gentle or stronger cleanse depending on your preference. The chrome control knobs feel sturdy and add a nice touch of style.The installation kit includes everything needed, including a metal T-valve and a durable braided hose—both big upgrades over plastic alternatives in other bidet models.One small thing to note: Since this attaches under the toilet seat, it may cause a slight tilt on some toilet seats. Adding bumpers (sold separately) can help level it out.And here’s a quick joke: Why did the bidet start a podcast? Because it always knew how to make a splash!Overall, the LUXE Bidet NEO 185 Plus is an affordable, easy-to-install, and refreshing upgrade. It’s well-built, easy to use, and offers a much cleaner experience than toilet paper alone. A great addition to any bathroom!

We installed the LUXE Bidet NEO 185 Plus, replacing our Luxe Bide Neo Elite that we have had since 2018 or 5 years. This new model has hinges allowing you to swing up the bidet piece to clean behind the nozzle area which to be honest, I had not been able to clean very well in those 5 years with the Neo Elite, since I could not get a toilet brush back there and I tried to clean with a paper towel and cleaner. With this 185 Plus, I am able to raise the toilet seat then the bidet and hold up the bidet attachment to clean behind the nozzle area with a toilet brush. We have a longer, older Universal-Rundle 1.6 gpf toilet.The controls looks more rectangular than the Elite and the Plus knobs have more edges than the Elite. Although I miss the softer curved lines on the Elite, I have gotten used to edges that might allow for better grip and turning.Installation time took less than 15 minutes to take out our old Elite and replace it with the Plus, not including the time to empty the toilet tank. Having a small glass with straight edges helped with emptying the water as did a washcloth to soak up the water. We probably did not have to do such a thorough job, just make sure water is below the outtake area. A small towel will also be helpful when you disconnect the water hose. The bidet comes with a good instruction book, parts, and a plastic wrench. You will need a large flathead screwdriver to unscrew your toilet lid.Even having had the 185 Neo Elite, you will need to replace the water supply hose and T-adapter with the ones provided in the kit. The Plus uses a standard 3/8" fitting. Previously for the Elite, we had to buy a special T-adapter to get the original Neo Elite to fit. The company may have provided one if we contacted them, but we had bought it from Amazon. For the Plus, the hose is 7/8" to connect up to the water tank while the end that connect with the bidet is 3/8".We replaced both our Elite bidets in one day and found it easier to:1. Turn off the water and mostly empty the toilet tank2. Take off the toilet seat and old bidet. It will give you more room to access the pipes on the left.3. Replace and connect up the new hose and T-adapter4. Put the new bidet on and then the toilet seat over it. We did not change out the previous hinge covers from the Elite bidet.5. Screw the pieces gently together6. Have a woman sit on the toilet and see if the feminine and bottom wash spray are coming out to spray the right areas. If not adjust the bidet position.The 185 Plus bidet spray come out more as a good, strong spray and less of the Elite's penatrating, directed stream of water which used to result in a loop of having to go to the bathroom again, spraying to clean and having to go again, etc. I am happier with the way the 185 Plus sprays. The 185 Plus includes the self-cleaning feature allowing water to wash over the nozzles. The controls and the way the knobs work are the same for the Elite and the Plus, so there is no learning curve. The knob farthest out controls the water pressure, turn this one slowly. The knob closest to the tank adjusts from feminine wash (to the far left), normal wash (middle), and nozzle self-clean (far right).As I mentioned, we have been using the Luxe Bidet Neo Elite series since 2018 and have been very pleased with them. We had two that we installed in our house, we liked them so much. I had bought a replacement knob in 2022 from the company since the inner plastic part which kept it in place had broken off. They arrived quickly. In 2023, I was sent an e-mail from Luxe Bidet, since I had left a 5 star Amazon review on the Elite in 2018, they offered me a 10% discount toward a new Luxe Bidet Plus and up to $50 refund check for my Elite bidet. I ordered the new Luxe Bidet Plus, provided the Amazon order information, and they sent me a $50 check even though the original Elite did not cost $50.I am really happy to get this new model, so I can clean behind the nozzle area. Also, in the 5 years, the bottom of the old Elite nozzles had gotten rather dirty even with the protective door cover. I know I did not do the self cleaning as often as I should. Periodically, I would also use cleaner and paper towel to clean them off more.I am delighted to have the new LUXE Bidet NEO 185 Plus and know I will get many cleaner years from this newer model. These bidets really help you feel much cleaner with less work and stretching to get all the areas and saves a ton of toilet paper. I was most grateful to have the bidet during the great COVID-19 Toilet Paper Shortage of 2020.

I bought this Bidet on the recommendation of my son, but, while the unit comes with an installation kit the kit is different to what is required for installation in Australia. The “T” piece used between the original tap and cistern is a different size to the existing fittings, and I had to make up a fitting to do the Job.After receiving the bidet kit I realised my toilet seat was not compatible and so I bought the Luxe seat to go with the bidet. My body geometry means the aim of the bidet is accurate, and water flow and pressure is more than adequate to do what is required. I am very happy with how this thing works.

UK install. This has taken me ages to find the correct fittings to get this to work in the UK and all the Luxe websites state that it is a 1/4" water hose fitting on the bidet itself. I found it not to be that on the particular one i had but it is 9/16" x 24 TPI (Threads per inch). So I bought a brass reducer fitting that was 9/16" x 24TPI UNEF (Unified national extra fine) female and 3/8" BSP male that will fit any generic UK water hose no problem. From the photos you can see how i then plumbed it up to my water supply. This is no means of advice on what to do but it's what i did for my application and it worked a treat.

Das Bidet ist leicht zu bedienen, der Wasserstral ist angenehm und nicht zu schwach.Das Luxe Bidet fühlt sich wertig an und ist leicht zu reinigen.Das größte Probelm, weshalb ich auch 2 Sterne abgezogen habe war, dass der 3/8" Anschluss dem Amerikanischen Standart entspricht, was in Deutschland nicht zu unserem 3/8" Standart passt.Abhilfe hat ein Adapterstück gebracht welches ich auf fittings-space bestellt habe.Wichtig ist, am Bidet ist ein 3/8" Compression (also der Amerikanische Sanitärstandart) während wir bei Sanitär BSPP (Britisch Standard Pipe Paralell) verwenden.Mit diesen Angaben lässt sich ein passendes Ersatzteil beschaffen.

Funcionalmente o Bidet é ótimo, nenhuma reclamação. Porém o adaptador que acompanha o produto vem no padrão para encanamento US. É necessário um adaptador para dividir a saída 1/2 em 2 saídas 1/2 e também um redutor de 1/2 para bitola da mangueira.Rodei por umas 10 lojas de material hidráulico até achar alguma que tivesse algum adaptador. Na descrição do produto menciona a medida de 3/8" para a bitola da mangueira, porem o adaptador 3/8 para 1/2 que é facilmente encontrado não serve, é maior que o necessário. Após muita busca encontrei o adaptador na mangflex em porto alegre , pelo que o vendedor disse a medida é realmente 3/8" mas para canos de cobre. Espero que essas informações ajudem futuros compradores a acharem os adaptadores com um pouco mais de facilidade.

The adapter that it comes with to connect it to the water source doesn’t fit UAE standard.I spent half a day going to different hardware shop and they all said this adapter doesn’t fit UAE, it probably US sizes.