Your cart is empty.
Your cart is empty.Product Description
eOUTIL DL1912 DIGITAL LEVEL ANGLE GAUGE
- Find the angle on a surface quickly and accurately
- "Traffic Light" LED technology for the brightest display is easy to read in all lighting
- Built in magnets at the base of measurement
- V-groove at the measurement base, for easy & accurate measures on round pipes
- Auto Reversible Display for easy viewing
- Audible tone at horizontal & vertical
- Hold function to freeze the measurement
- Set ZERO function for checking relative angles
- Automatic shut-off after 3 minutes non-using
- Powered by 2x AAA battery (not included)
FEATURES
Auto Reversible Display
Built-In Gyroscope, when upside down, the screen reading will automatically adapt to the display direction.
V-Groove Edges & Strong Magnetic Base
Strong V-groove magnetic base enable optimal alignment on conduits and pipes for bending and alignment stably.
"Traffic Light" LED Display in 4 Units
It quickly measures angles from 0 to 360° (4*90°) in ° degrees, % percent, mm/m, IN/FT slope or pitch and with HOLD function to freeze the measurement.
WIDE RANGE OF APPLICATIONS
Miter Saw & Table Saw
Drill
Tube
Hang A Picture
What You Get:
1 x Digital Angle Gauge
1 x Screwdriver
1 x Carry Bag
1 x User Manual
1 x Brown Box
superedge88
2025-08-20 10:00:45
This is such a cool tool! I bought this to use with sharpening knives in order to set different bevel angles to fulfill customer requests.This is very easy to use, is very precise, and is SO easy to read!The display on this unit really sets it apart from the other similar units. The display is pitch black except for the green LED numbers and symbols which achieves a very high contrast. The picture I attached is not quite accurate, the glowing numbers are a much more rich green, the picture shows the numbers a little washed out.I will update my review if I have any issue with this angle gauge. So far I am very impressed!
drumriser
2025-08-18 15:07:44
I use this to get the bevel angle just right when sharpening chisels and planes with a honing guide. More accurate than trusting the recommended measurements in the instructions the guides usually come with. Good idea to zero out the level first, as your table surface may not be level. Very handy tool for a minimal investment.
jim springer
2025-08-14 18:58:20
Works Great
mc16
2025-08-12 16:52:09
What’s the difference between 0.41 degrees and 0.29 degrees?A) Math confuses me...B) 1/100th of a degree precision isn’t enough for me to make a proper determinationC) Nothing. Both are pretty dang levelFor my level of talent? It’s C.If you agree, buy this!I love it. There are a few like this on Amazon, but I picked this one because of the display. It’s clear, bright, and the little see-saw icon is highly intuitive.Picking it up and putting it back down in the same spot rarely shows the exact same reading, but it’s always within 0.10 or so. If that’s not for you, feel free to spend significantly more to buy something that will meet your standards. I can’t cut or weld to that precisely, so this thing is perfect for me. I’m tempted to buy a spare in case I lose this one...
Franklin08
2025-08-06 17:31:24
The media could not be loaded.
Crazy S
2025-08-02 11:54:51
Takes AAA batteries would be nice if it just came with them in it but guess I still have to test it and see how it works
Eric
2025-08-01 13:52:15
Two thing I don’t like. First it turns off after a few minutes, annoying when adjusting your blade. Second once it reads 90 it flip the display WHY?? Buy something else
Garry Choate
2025-07-31 12:10:26
Its easy to read with the backlighting. it has audible sound that lets you know when you are level and it has a magnetic base.
Ryan C
2025-07-26 13:12:42
Makes it really easy to dial in bends in tubes and makes multiple matching pieces easier to make. Also use it for a ton of other fabrication stuff like leveling something based on a reference
Mike Brown
2025-07-13 18:27:17
I couldn’t be more pleased with the angle gauge. It is accurate and easy to use. Great value for my money. Would recommend to others.
AR
2025-07-01 18:18:03
Einfach zu bedienen, gut ablesbares Display.Habe mehrere Messungen durchgeführt und entsprechende Bauteile mit den Gradanzeigen anfertigen lassen, passten perfekt.
Micha
2025-06-07 21:00:13
Verwendung auf dem Bau, liefert genaue Ergebnisse, tolles Teil, nur könnten Batterien dabei sein !
Natasha
2025-06-06 16:41:07
Easy to use. Fab performance. Definitely value for money. Just the right size.
superedge88
2025-05-25 16:11:59
This is such a cool tool! I bought this to use with sharpening knives in order to set different bevel angles to fulfill customer requests.This is very easy to use, is very precise, and is SO easy to read!The display on this unit really sets it apart from the other similar units. The display is pitch black except for the green LED numbers and symbols which achieves a very high contrast. The picture I attached is not quite accurate, the glowing numbers are a much more rich green, the picture shows the numbers a little washed out.I will update my review if I have any issue with this angle gauge. So far I am very impressed!
drumriser
2025-05-14 18:44:19
I use this to get the bevel angle just right when sharpening chisels and planes with a honing guide. More accurate than trusting the recommended measurements in the instructions the guides usually come with. Good idea to zero out the level first, as your table surface may not be level. Very handy tool for a minimal investment.
jim springer
2025-05-02 13:19:55
Works Great
mc16
2025-04-26 14:29:20
What’s the difference between 0.41 degrees and 0.29 degrees?A) Math confuses me...B) 1/100th of a degree precision isn’t enough for me to make a proper determinationC) Nothing. Both are pretty dang levelFor my level of talent? It’s C.If you agree, buy this!I love it. There are a few like this on Amazon, but I picked this one because of the display. It’s clear, bright, and the little see-saw icon is highly intuitive.Picking it up and putting it back down in the same spot rarely shows the exact same reading, but it’s always within 0.10 or so. If that’s not for you, feel free to spend significantly more to buy something that will meet your standards. I can’t cut or weld to that precisely, so this thing is perfect for me. I’m tempted to buy a spare in case I lose this one...
Franklin08
2025-04-06 13:21:51
The media could not be loaded.
Crazy S
2025-04-03 13:47:57
Takes AAA batteries would be nice if it just came with them in it but guess I still have to test it and see how it works
Eric
2025-03-20 20:22:04
Two thing I don’t like. First it turns off after a few minutes, annoying when adjusting your blade. Second once it reads 90 it flip the display WHY?? Buy something else
Garry Choate
2025-03-16 18:07:05
Its easy to read with the backlighting. it has audible sound that lets you know when you are level and it has a magnetic base.
Ryan C
2025-02-20 15:33:52
Makes it really easy to dial in bends in tubes and makes multiple matching pieces easier to make. Also use it for a ton of other fabrication stuff like leveling something based on a reference
Mike Brown
2025-02-13 15:08:38
I couldn’t be more pleased with the angle gauge. It is accurate and easy to use. Great value for my money. Would recommend to others.
AR
2025-02-12 10:59:38
Einfach zu bedienen, gut ablesbares Display.Habe mehrere Messungen durchgeführt und entsprechende Bauteile mit den Gradanzeigen anfertigen lassen, passten perfekt.
Micha
2025-01-09 11:37:40
Verwendung auf dem Bau, liefert genaue Ergebnisse, tolles Teil, nur könnten Batterien dabei sein !
Natasha
2025-01-02 18:18:21
Easy to use. Fab performance. Definitely value for money. Just the right size.
Recommended Products