Your cart is empty.
Your cart is empty.The MIDI Breakout Board MV board is an easy way to connect a hardware MIDI device to an Arduino, microcontroller, or embedded computer such as the Beagle Bone or RaspberryPi. This version of the MIDI BoB is a fully assemble board. The PCB provides an optically isolated MIDI I/O (Input and Output) signal and power. There are mounting also holes in the PCB for a more permanent installation. An example Arduino sketch is available on the manufacturers website which will get you up and running quickly. MIDI Breakout MV is similar to the old EZ. However, the MV includes a switch allowing you to select 5V or 3.3V levels.
Tom
2025-09-02 21:30:55
Works great. They are also making a new a MIDI-IN, MIDI-OUT, with 9V regulated power with 5V, 2A to power smart LEDs, which is already to be wired to Pin7.
Water Dog
2025-06-17 13:36:41
Used this to use MIDI in to control things via raspberry pi. Works good. Easy to solder together.
solidus
2025-01-24 10:59:18
You just need to look up the instructions online since none was provided with the kit
Recommended Products
