Your cart is empty.
Your cart is empty. Female MIDI to Male TRS 3.5mm Cable Adapter Type B. 20 cm's long end to end.
MIDI devices are being built thinner with manufacturers moving to an external dongle to accommodate the wider midi plugs.
Zawdio introduces our MIDI TRS Type B cable.
This is a non-standard pinout Midi to 3.5mm cable built to replace the missing MIDI dongle from the following manufactures.
This pinout, commonly called the Type B cable, is is compatible with:
1010music Bitbox, Blackbox, Fxbox
1010music Laserbox, Synthbox,Toolbox
1010music Euroshield 1
1010music MX4
1010music Waverazor Dual Oscillator
16N Faderbank
ALM Busy Circuits PEXP-2 Expander
Analouge Solutions Treadstone
Arturia Keystep, and Beatstep Pro (NOT original Beatstep)
Erica Synths Drum Sequencer
Faderfox EC4 and FC4
Five 12 Vector Sequencer
Flame Quad CV Recorder
Flame Curves
Flame µQMCV
Future Retro
Jakplugg Threshold
LPZW.modules WK3, Schleußig, Tram8
Malekko Sync
Michigan Synth Works mBrane
Michigan Synth Works Threshold
MXMXMX C2M
Novation Launchpad Pro MK2 (NOT MK3 or Launchkey Those are Type A Blue cable)
Novation Circuit & Circuit Mono Station
Pittsburgh Modular Liveforms SV-1
Polyend Poly 2
Polyend Tracker
Supercritical Synthesizers Demon Core Expander
XOXO Modular MidiXO
vpme.de Trig31
Please note this is NOT compatible with several models by other manufacturers.
Check compatibility with our other cables
Joseph Park
2025-09-04 12:26:21
Red one did not work! But no fault with the product. I needed this to connect my Korg NTS-1 to my midi controller. I ordered the red one thinking I’d just get the color that matched the appearance of the rest of my equipment, but after it arrived I realized that this cable did not work at all with the Korg NTS-1 and after reading a number of other reviews learned that the Blue version is the one that works with Korg products and that the color is an indication that the connection is wired differently. So I ordered the Blue version of this cable and it works perfectly. Check which color will work with your equipment before ordering!
Jake Hooker
2025-09-01 13:31:51
One would think my purpose in buying this cable is to annoy my wife, but it really is very useful in connecting all my synth gear! Most devices that need an adapter of this sort come with a pair of them, so yeah, this could end up in a drawer for a while, but it works really well, and is built very much like a tank!
Jacobu Desu
2025-08-16 18:20:28
Not knocking the product, but be super sure before you buy that your device is compatible. They offer blue and red cables-- but they are MIDI TRS Type A and Type B respectively. This isn't the company's fault; idk how the hell we ended up with two midi trs specs that are identical to our eyes, but here we are. If you have a boss or korg device go with the blues. If you're using a beatstep pro, get the reds. I really recommend searching for keywords before buying any midi trs cable.
Sergio
2025-08-13 12:43:55
Just what I needed, just be careful to get the one you really need.
amber winter
2025-07-28 13:57:14
Fantastic adapter so I can’t review bomb the product but for whatever reason the red doesn’t work with the Boss RC500. The blue version of this exact same thing works like a charm and is a wonderful addition to the cable bag! Just gotta figure out how to send my red one back for another blue.
warp100
2025-07-23 17:59:22
I first ordered from a third-party seller and received a version that was different than the description. The length was 50cm instead of 20cm — maybe some people want that. I later ordered from the manufacturer and received the pictured item. The manufacturer versions are great because they actually print “Type B†on them so you never forget.
Customer
2025-06-30 09:58:33
Says it is compatible, is not.
paulschrier
2025-06-11 16:27:06
This cable fully complies with the MIDI association specification. It is also well constructed and comes in a stylish color.
DuhBuhYuhG
2025-05-17 16:50:44
I like the length. It is working well.
Tejinder
2025-05-14 11:20:12
Good quality product but you seller need to mention if its type-a or type-b midi adapter.
El dorado
2025-05-11 15:37:25
Cable feels beefy enough. Works great for using my midi keyboard with my novation circuit or for clock sync.
Jon
2025-05-04 17:52:36
does not work with any midi device i have. cable tester reveals why: this is not a midi trs type b adapter, it does connect pin 5 to the ring (and apparently that's enough to make it work with some devices if the comments are to be believed) but rather than connecting pin 2 only to the sleeve and pin 4 only to the ring it connects both pins to both the sleeve and the tip
chrisedu
2025-05-02 13:59:37
it works well with Polyend machines!
Joseph Park
2025-04-27 12:14:22
Red one did not work! But no fault with the product. I needed this to connect my Korg NTS-1 to my midi controller. I ordered the red one thinking I’d just get the color that matched the appearance of the rest of my equipment, but after it arrived I realized that this cable did not work at all with the Korg NTS-1 and after reading a number of other reviews learned that the Blue version is the one that works with Korg products and that the color is an indication that the connection is wired differently. So I ordered the Blue version of this cable and it works perfectly. Check which color will work with your equipment before ordering!
Jake Hooker
2025-04-26 16:02:12
One would think my purpose in buying this cable is to annoy my wife, but it really is very useful in connecting all my synth gear! Most devices that need an adapter of this sort come with a pair of them, so yeah, this could end up in a drawer for a while, but it works really well, and is built very much like a tank!
Jacobu Desu
2025-04-05 12:15:23
Not knocking the product, but be super sure before you buy that your device is compatible. They offer blue and red cables-- but they are MIDI TRS Type A and Type B respectively. This isn't the company's fault; idk how the hell we ended up with two midi trs specs that are identical to our eyes, but here we are. If you have a boss or korg device go with the blues. If you're using a beatstep pro, get the reds. I really recommend searching for keywords before buying any midi trs cable.
Sergio
2025-03-30 18:45:38
Just what I needed, just be careful to get the one you really need.
amber winter
2025-03-29 11:07:47
Fantastic adapter so I can’t review bomb the product but for whatever reason the red doesn’t work with the Boss RC500. The blue version of this exact same thing works like a charm and is a wonderful addition to the cable bag! Just gotta figure out how to send my red one back for another blue.
warp100
2025-03-13 20:33:49
I first ordered from a third-party seller and received a version that was different than the description. The length was 50cm instead of 20cm — maybe some people want that. I later ordered from the manufacturer and received the pictured item. The manufacturer versions are great because they actually print “Type B†on them so you never forget.
Customer
2025-03-06 14:10:59
Says it is compatible, is not.
paulschrier
2025-02-11 13:55:24
This cable fully complies with the MIDI association specification. It is also well constructed and comes in a stylish color.
DuhBuhYuhG
2025-01-29 16:16:00
I like the length. It is working well.
Tejinder
2025-01-23 18:16:28
Good quality product but you seller need to mention if its type-a or type-b midi adapter.
El dorado
2025-01-11 14:48:34
Cable feels beefy enough. Works great for using my midi keyboard with my novation circuit or for clock sync.
Jon
2024-12-15 10:11:02
does not work with any midi device i have. cable tester reveals why: this is not a midi trs type b adapter, it does connect pin 5 to the ring (and apparently that's enough to make it work with some devices if the comments are to be believed) but rather than connecting pin 2 only to the sleeve and pin 4 only to the ring it connects both pins to both the sleeve and the tip
chrisedu
2024-12-10 10:39:59
it works well with Polyend machines!
Recommended Products
