Your cart is empty.
Your cart is empty.These versatile, all-purpose T-track stops provide back and side support when paired with horizontal inline clamping products. The custom cam handles makes locking and unlocking them easy for quick adjustments.
Joe
2025-09-03 11:20:08
Great clamp for T track.
Joe Swaika
2025-08-27 10:07:11
It works but for some reason the twist lock is a little difficult for older hands to work
kory huennekens
2025-08-23 10:00:43
When I opened the box, all the screws that hold the lever arms on had fallen out! The screws have not positive stop on them. So when you tighten them up they squeeze the arms on the lever and then the lever is hard to set! If you leave them loose they will fall out as you’re using them! I’m going to keep them but won’t recommend!
Lori Cook
2025-08-14 14:14:36
These would be better if they had the tabs to keep them parallel or perpendicular to the T-tracks. I like them better than the ones with knobs. These are easier to secure.
Kenneth
2025-07-06 10:50:46
They are what Tony the Tiger said
Eric
2025-06-22 11:11:25
The fit the standard t-track and are easy to use and install. Would recommend.
Vette
2025-06-15 13:30:01
Bought these to use with my CNC. My T-Track is recessed to avoid hitting with Bit. These screws are to short, made some longer screws. 1) Base plate is too short, when tightening it doesn't reach other side of spoil board. ( only fits the T-Track width. 2) Cam does not tighten more than half a turn and you can only use cam in 1 direction, so if your 1/2 turn off you need to remove it, spin t-bolt, reinstall it. Even then it's not that tight. Got for Christmas, probably can't return them now. Would have been ok if the base plate was longer and/or screw hole was slotted. Can't use them. ****If Your T-Track is not flush with your work top, these wont work.
GizzmoFreak
2025-03-20 13:42:28
Works as expected, but the set screws came off a few times. An easy fix, but an inconvenience none the less.
Tom
2024-11-21 13:56:48
They seem really convenient with the cam lever, but you have to ensure the t bolt has the correct side facing in because if not the cam level won't tighten properly. They also seem to come loose pretty easy.I will mark the t nuts with sharpy to help indicate how to orientate them when sliding into the t track, but I think there is better stuff out there.
Recommended Products
