Your cart is empty.
Your cart is empty.Product Description
Playerpay
2025-09-03 17:44:23
I purchased this for my 3D printer as I needed a sturdy stand. It is very sturdy! This was very easy to put together from pieces to a complete product in only about 10 minutes. You do not need tools as it comes with all of the tools that you need to complete the project. The height is perfect in my opinion. It looks great and it made of high quality materials and will probably last forever without any issues. It is very stable. It functions great with my 3D printer as there are metal storage shelves underneath for keeping my filament supply. If you’re in the market for a stand like this for your printer, 3D printer or any other bulky item. I would recommend this product.
Robert Anderson
2025-07-13 15:17:30
This cart was perfect for my Epson Photo Printer. It is very sturdy and super easy to put together. Fits wonderfully under my desk. Great value and I’m sure it will provide years of service.
M. Fullerton
2025-07-11 12:08:40
Ordered these for a commercial setting where we needed something to hold up a larger HP office printer. They work perfectly for that (based on the dimensions we needed). The construction is what you would expect. Somewhat light-weight for this purpose but will support the printer fine (~80 lbs) as long as it's not moved around a lot. The wheels are typical plastic casters which was fine for our needs as the floors are polished concrete. There are 2 shelves included for storage of extra paper. The legs and shelves are constructed like those chrome restaurant-style wire shelving units, just not as beefy. To be honest, this was the only stand with these large dimensions so it was our only choice. In my opinion, these are overpriced, but there was nothing else with the dimensions that we needed. Had there been something a bit sturdier, and the same dimensions or maybe a little larger, I would've gone with them.They need to be a bit sturdier, with better wheels (non-plastic), with a slightly lower price.
Cindy R
2025-05-28 12:29:08
I have two of these carts, a larger one and this model. They are very solid and can use them with or without wheels. Easy to move shelves too. Would definitely buy again.
Lele
2025-05-11 14:56:18
I got this for my work front desk to declutter the counter space. It tucks under nicely and is the perfect height! Took me less than 10 min to assemble and it rolls super smooth. Happy with the purchase.
G A Esworthy
2025-04-26 19:39:32
This table met all the requirements: dimensions, weight capacity, color, general appearance. Assembly was straightforward especially because I've put together shelving with the same sort of two-piece conical gadgets that attach shelves to posts. Once assembled, the table seems pretty solid and I expect it will work just fine for the heavy (approx. 45 lbs, 20 Kg) color laser printer I intend to put on it.So why only three stars?First, one of the lower shelves arrived a little bit bent (packaging was fine, so that wasn't the reason for damage). It won't interfere with my intended use, but it was disappointing. When I considered the hassle and time lost to deal with a return, I opted to keep the thing as-is.Second, the table top is attached to its frame with four flimsy sheet metal straps that are not fitted to task; they bend easily. And each of those straps is held in place with a pair of small wood screws that, careful now!, can't be tightened down much without stripping the holes in the particle board. I was fortunate in discovering this without (pardon the expression) screwing things up badly, but I'd have liked to tighten the attachment a bit more than I was able to.Third, there are eight black plastic washer-like items not mentioned or shown in the parts list and assembly diagrams. When I lifted one of the shelves out of the packaging, most of them fell off and a couple rolled far enough away to be hard to find. But I need not have searched, as these are evidently spacers to keep the shelf fittings from scratching each other and are not used in the finished table. OK, this is a minor gripe, but it's still a gripe: unidentified things that look like assembly parts shouldn't simply fall off the major pieces during unpacking. They should at least be on the parts list, described as packaging-only, and named "Aggravators, 8 each".Would I recommend this unit? Yes, but with reservations.
Carol Morales
2025-04-08 17:05:01
In general I like the cart, it’s sturdy. But the wheels don’t move smoothly and I have a wood floor.
Steff
2025-02-22 12:38:15
I probably spend about $1500 on Amazon a month on my home and my business combined (to give you an idea of how many things I buy on here). I have to say this is the biggest piece of junk I have EVER bought. Everything was disheveled in the box, directions were awful, and nothing fit together properly. It's scary that I bought this stand to sit my laser equipment on, since it's the wobbliest thing I have ever put together. I hated it so much I disassembled it and put it back in the box. Junk and it shouldn't be sold on Amazon. Fyi-this may be the harshest review I have ever written, but needed to let others know.
Patrick Lipscombe
2025-02-06 14:39:30
Easy to assemble & looks good but not perfectly level
an earthling
2024-12-30 10:13:03
I have a ton { probably 24 of them over the years, maybe more} of the clip type shelving and have used them for years. I have made all the mistakes, shelves upside down with large end cap to top and smaller end cap pointing towards bottom {doesn't work} , clips that don't fit {have to rotate them with others to match sometimes} but this tiny little cart manged to defeat me. I worked for an hour to get this set up and these cips just DO NOT WORK! I couldn't get the legs to stay on, the clips woildn't line up in the same place on the legs and the clips wouldn't fit into the shelf cups, this was a total disaster . Buyer beware I say. I NEVER send things back to Amazon, this cart is going back. I am disgusted with this product.
Recommended Products