Your cart is empty.
Your cart is empty.Product Description
Push Button Switch
Self Lock Mechanical Equipment Control Station
Product Description
- Button is extremely durable and has a long service life. The buttons are simple to operate and easy to use. A start button and an end button.
- Widely Application : Great for Box Mod, Horn Button Switch, PC Power Switch, Kill Switch or any circuit controls ,electronic DIY equipment.
Specification:
- Contact Type : Latching ON/OFF
- Rated Voltage : AC 220/380V;
- Power : 7.5KW
- Overall Size (Approx.) : 100 x 60 x 54mm / 4" x 2.4" x 2.1" (L x W x T)
- A start button and an end button
- ·The switch has passed our quality inspection, You may buy with confidence.
- ·We will try our best to solve problems for you, Or send you a new one, Until your problem is solved.
Features:
Metal Shell
High quality metal casing，Flame retardant, easy to install，Simple and beautiful outline,Long mechanical life.
Button protection ring
Outer ring sanitation button,Exquisite manufacturing process,Extend button life.
Copper plated silver dots
Copper plated silver dots,stainless steel screw,Improve conductivity,
long lasting.
Fixing screw
Fixing screw,Plus reinforcement,
Used to connect both ends.
donald smith
2025-08-31 17:27:44
My compressor is on all the time, switch is used to check oil and air filter. Smiple switch. time will tell but great price for quick fix.
Davis Fabrication
2025-08-28 10:04:56
I purchased too one turns on exhaust fan and one turns on air compressor and they both are working fine
phranticness
2025-08-27 13:25:31
Standard 3/8 knock out hardware does not fit. (1/2 inch knock outs). I had to drill/file the holes to fit wiring clamps. The included plastic grommets are a joke and not a safe long term solution unless the cord never moves.The switch contacts and spring pressure are fairly robust, I'm not convinced this is actually stout enough to take 7200 watts but I'd feel comfortable with 1/2 that. I'm using it for a 1.5 horsepower motor and the load is only started once this switch is on, it should be well within it's capacity. I'd buy this again.
William Floring
2025-07-21 14:40:26
Bought this to control the garage heater during the Ohio winter. Didn't make it past the first couple weeks. Fell apart. It actually fell apart. Button fell off, one of the contacts dropped off.
David Billman
2025-07-09 14:19:44
Works great on my planer
Nunya Damnbusiness
2025-06-11 16:14:16
Some reviews said it was decent some said junk. I think for the price it's workable. The holes Are a tad small for a 1/2 wire clamp but was able to finesse it with needle nose and then thread it in and place lock nut.EDIT 7-24-23. Over a Year later still working fine Not much to it but effective and simple Will also state the one I got Is metal I've seen some cheaper ones plastic but this is TIN Was kinda floating on my machine and would have surely bent if I had only relied on the top being mounted to a pipe 90° So I trimmed a L bracket and tapped a hole to catch a screw in the switch and used an existing hole on my machine.Overall for how cheap it was compared to say an industrial brand It was worth the extra steps for me As far as longevity time will tell.. Will update review if fails in untimely manner
JR Sound
2025-05-16 15:33:06
I'm constructing an inline on/off switch for my air compressor -- this switch will work perfectly in tandem with the Legrand-Pass and Seymour L620P & L620C plug and connector, respectively. I haven't yet assembled it, but my initial assessment is everything will go together seamlessly. The ON portion of the switch stays engaged when pressed; the OFF portion disengages the ON switch when it is depressed. (The OFF switch does not stay engaged -- it is a press / release type switch.) Nicely manufactured -- the overall product should operate the way I envision it functioning.
Big Sexy
2025-05-07 10:46:07
Purchased in February,already broken.
Germar
2025-05-04 10:35:13
If the application isn’t obvious, ad a sign to promote pushing the button all the way in.
Customer
2025-04-20 16:40:53
Have not installed yet. Bought one for table saw and one for compressor, both had light switches installed for switches but these seemed safer for workshop use. Arrived very quickly, much faster than expected. Installation looks simple in spite of no instructions included.
David Hood
2025-03-30 16:04:54
The switch works well and it's extremely easy to install. Just cut the line, bare the wires, and continue the circuit from white to white and black to black. The buttons function well; although, you have to press a little hard and they are not that smooth. You get what you pay for though. In general, well worth buying.
pierre jodoin
2025-02-12 13:31:42
Works very well on my old table saw.
EBL
2024-12-26 10:04:30
After a short time in operation the Start button stayed in and wouldn't release. Upon inspection, I noted that the locking mechanism keeping the Start button engaged is made of thin plastic parts that appear to be very fragile. Even if it didn’t fail so quickly, it seems to be too flimsy to last on a machine that is used often.
Recommended Products