Shopping Cart

Your cart is empty.

Your cart is empty.

New Lower Control Arm Prying Tool, Suspension Specialty Bushing Tool, Lower Ball Joint Pry, Control Arm Tool Bushing Removal Tool Designed to Work with a 1/2' Drive Extension Breaker Bar

4.5 (8) Write Review
Free shipping on orders over $29.99

$19.90

$ 9 .99 $9.99

In Stock

1.Color:1pc


  • 🚕【LOWER CONTROL ARM PRYING TOOL】Designed for prying down the lower control arm to separate the lower ball joint. Aids in getting ball-joints free from knuckles, adjustable position pulling arm allows you to position the tool where needed
  • 💡【UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES】Applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans.
  • 🔎【WORKS WITH 1/2" Drive Extension Breaker Bar】The lower control arm prying tool is compatible with 1/2" Drive Extension Breaker Bar and can withstand tremendous pressure without deforming.
  • ✅【Safe to Use】: Easy to use and will not damage other parts of the car in the process of repair. It adopts upper and lower two-point force-bearing. Compared with the old Lower Control Arm Prying Tool, it is not easy to slip off the lower arm.
  • 🌹【Material】：Forged by Alloy steel, Rugged and durable. Can withstand 3500N. At the same time, it has durability and corrosion resistance.


Product Description

1
2
3
4
5

Juan gorrin
2025-07-16 16:15:18
100% positiva
Jose Gonzales
2025-05-30 18:57:50
Love the tool helps me out alot
Customer
2025-05-24 11:56:05
This tool works great for prying on lower control arms made of thicker material. Unfortunately it doesn't work too well on control arms that are thinner due to the distance between the pins. It is quite heavy duty though and after multiple uses is still in good condition.
Bernard Spriggs
2025-05-19 12:10:56
i have a couple of this brands tools and they are really solid
FL560
2025-04-27 11:10:23
Good tool concept , not expensive,but it started to bend , bad choice of iron obviously,
Ovo5.7
2025-03-25 17:31:37
I recently purchased this control arm tool. I have been using the hook style design for holding down control arms, but this new style is easier to use and feels way more secure to hold. The quality of this tool is just as good as name brand, the welds look complete, the steel is thick, and the finish is solid. You can use this with the ratchet so there is no need for a prybar and risk of it slipping off!
Max
2025-02-10 17:01:01
I’ve got this primarily to bend and pry things similar to fubar. The tool is very chunky and holds my entire weight of about 170lbs no problem. The pins look like they were chopped off an 1/4” ratchets, but whatever. There is s nice ring to the metal, so there’s a chance it was hardened as well. There are no welding defects mentioned by other reviewers. You can use either of teo openings with an 1/2” drive or breaker bar.I’m sure this will do the job just fine as long as you don’t try to put all weight on the tips of the pins. If you do intend to use this for control arms - keep in mind you would need the vehicle on a lift to have enough clearance for your breaker bar. You would also probably need a helper pulling on this tool away from the knuckle while you try to align the bolts on the knuckle.
jend
2024-12-14 13:50:07
So this saved us during a recent front end job of my CRV. I gave it a try and it worked great. This little guy saved the joints so I didn't have to replace them. Last time I had to cut the joint off with a grinder. This saved time and parts.