Your cart is empty.
Your cart is empty.Product Description
MEETS THE HIGHEST INDUSTRY
Upgraded office chair base replacement from OMYOFFICE is made of high-quality chrome
METAL OFFICE CHAIR BASE 28'‘
The upgraded metal base is reinforced and wide enough to prevent sway.
HEAVY DUTY METAL BASE
No More Tilting When Sitting on the Chair，Supports Up to 2200+Lbs
MORE STABLE & SAFER
Both ensure the stability and safety when sitting on the chair. No worries about weight 500Lbs or more.
Universal Socket Size of Casters
The socket is acceptable for casters 7/16’’ x 7/8’’ (11mm x 22mm)
Standard 2" (50mm) Center Hole
The hub accepts standard gas lift cylinders, which is fit for most chairs.
OMYOFFICE CHAIR BASE REPLACEMENT
The reinforced metal and durability of the base will ensure your chair's base is firmly sound for many years.
-
OFFICE CHAIR BASE
- Upgraded office chair base replacement from OMYOFFICE is made of high-quality chrome-plated metal
-
BASE with Gloves
- Newly upgraded office chair base with gloves, no burden to remove and install the base
-
GAS LIFT CYLINDER
- Constructed of high quality solid steel to support a maximum weight of 1000 lbs
-
OFFICE CHAIR POSTION
Made of high-quality thickened outer steel to ensure compliance with quality standards
-
OFFICE CHAIR WHEELS
- Five chair wheels are enough to support 1,000 pounds, which is safe for big people.
-
STATIONARY CASTORS
Ideal for you to change your stool or office chair to a more stable fixed type.
BoneHead
2025-08-29 10:23:32
a lot of this is based on first impressions and only having use of these parts on my chair for like 3 days.I replaced the wheels on my computer chair with the roller blade type wheels. I am having bad luck with these types of wheels. 1 set lost its bearings. 1 set bent and when they bent they broke welds on the chairs base, which lead me to buy this base. as long as I was having it all apart anyway I swapped the piston for an improved version.so... the wheels add about maybe 2 inches to the height of the chair.this base adds a few inches to the height of the chair as its a bit convex in design. also the fitment of the new piston didn't automatically press half of its depth through the hole, so I get full height there too.all of this adds up to being inches taller than my chair used to be and feeling *very solid* a few days in after its install. when I raise the chair to its fullest, because of the piston... its *very high*. nearly bar stool height. I may have miscalculated the size of piston that I needed.I am going into detail about the other parts because they all need to work together. as I learned, if the wheels fail the base could fail. I am not sure I trust any of these parts to sit in this chair at full height just yet. it could be a nasty tumble.so far everything seems legit. the base is easy to put together and everything went together fairly easily. I am being cautious watching for bent parts and broken welds because there is a danger to parts created for a certain budget (or really ANY budget these days). the welders don't always know how to weld (zero penetration on the last base that came with the chair), amazon listing pages promise "overbuilt durability" that I have yet to experience. I don't have anything bad to say but its too soon to sing praises and I remain skeptical.If I need to update this for better or worse, I certainly will.
Ladylicious
2025-08-17 17:10:43
Excellent fit, product as described. Easy to install
chalug
2025-08-12 18:40:39
The chair in the picture is 15+ years old. It originally came with plastic swivel legs. I was leaning back in it one day and one of the legs broke; sending me into a wood drying rack, which broke and a piece of wood stabbed me in the back. Not wanting a repeat of that action ever again; I decided to buy swivel legs that would NEVER break.This office chair replacement set of swivel legs are rated at 2200lbs. I believe them. I have worked with steal most of my life and this stuff is very well made.
Joe Snuffy
2025-05-28 14:27:44
I bought this base to save my over priced chair. I am 180lbs 5ft 11in, I bought a 350lbs chair, it wasnt holding up to my friends. This base saved the day, I also bought one for my friend, saving his chair. This base is beefy af. If you are stout, this base will support. I even have the Roller blade wheels on it, it holds true.
PC Acfalle
2025-04-17 15:51:49
It seems solid, good peices, heavy weight, and it fits my original casters, but you have to put it together which i did not see any information on. We shall see how long the base lasts. I used a drill to put the bolts in instead of the supplied Allen key so the assembly was simple and quick.
Marilyn Cooper
2025-04-11 18:53:07
Super easy to assemble and works great. For those that are concerned about the 2" dim. Don't worry about it. The opening at the top of the taper in the base is slightly smaller and a 2" tube fits in perfectly and will not allow the tube to bottom out on the cylinder.
KC Rave
2025-03-31 17:50:10
So much better than the OE base. I'm certain this beast will outlast the faux leather seat I attached it to!
1 Man Army
2025-02-19 12:27:51
I bought this to replace a plastic base that cracked under use. That base was rated at 300lbs, but to be fair it was often overloaded with kids and wife piling on top of me while I was in the chair. This base is made of STEEL and rated over 2000lbs so should be up to task without me spoiling their fun. The base was easy to put together in 5 min using the supplied Allen wrench. The standard wheel openings are a bit tight however and prevented seating my wheels just using hand pressure. I had to use a rubber mallet to assist in seating them. One whack per wheel was all it took. Very satisfied with this product. Note, the dimensions on Amazon say it's 28" diameter. It is really 26". Typo? 26" is standard and the same as the base it replaced. EXTRA: I see a lot of people here had a problem getting the old base off. So did I initially. I first tried banging it off with a mallet while rotating the base. No good. I then simply went medieval on it and pulled out a 4" angle grinder with a cutting wheel on it. That made VERY short work of it. 5 min in fact. Just be careful not to hit the piston.
Richard Cyr
2025-02-15 11:33:03
tres tres bien merci
Francisco Villalpando
2025-02-12 12:52:02
Compre una Steelcase Leap V2 usada que desafortunadamente llego rota de la base haciendo que la llanta se cayera frecuentemente, tras varios intentos fallidos de reparar la parte rota opte por comprar esta base.La base quedo muy bien y se siente de buena calidad me preocupaba que el pistón chocara con el piso pero no es el caso, las llantas originales de mi silla también le quedaron bien, asà que en general estoy muy satisfecho.
Faisal Khan
2025-01-10 16:26:14
خامة جدا ممتازه ورائع عجبني كثير
DIEGO SAUL SERRANO DELGADO
2025-01-09 13:31:36
Salió muy resistente y duradero
Customer
2024-12-02 15:38:18
I can't recommend. Rated for up to 220lbs (100kg), I weigh 200lbs and it seems that my weight was sufficient to ruin this base in less than 4 months of use.
Recommended Products