Your cart is empty.
Your cart is empty. These light emitting diodes can be used for a variety of projects, including decoration lighting, RC indicator lighting, science circuit experiments, signal indicator, illuminating keyboards, musical birthday card, science experiments and miniature parts replacement.
Specification
Light Color: Red
Rating Voltage: 3V
Current: 20mA
Head Size.: 5 x 5 x 8.7mm / 0.2 x 0.2 x 0.3inch (L*W*H)
Wire Length: 20cm / 7.9inch
Packing List: 12 x Light Emitting Diodes with Wire
Advantage
These LED diodes emit a bright light, with high reliability and low heat produced. High efficiency round light bulb. With prepared wire and a resistor, the LED light emitting diodes are ready to use right out of the box.
Instruction
It is easy to use, just connect the wire to the DC power supply and it will work. Before connecting the wire, ensure that the positive and negative terminals of the LEDs are connected correctly to avoid damage.
NOTE
Do not overload the LEDs with excessive voltage or current to prevent damage.
C. Michael Taylor
2025-06-05 10:34:16
The media could not be loaded.
R Weir
2025-05-20 12:36:52
As described works as they should
Brad b
2025-04-13 15:50:47
Bought for a project should work good
Mr. P. Burt
2025-03-12 19:21:30
As described, delivered on schedule. I used six of these to replace and augment some dolls’ house lighting. Some used within existing plastic ‘shades’, some projecting bare through ceilings and one outside through a soffit board. All worked well, possibly could be a little brighter but within spec for this size of led. Powered from two 1.5 volt batteries in series. You must use the specified 3 volt supply.
jean
2024-12-05 17:15:32
Parfait pour mon projet.
Recommended Products
