Shopping Cart

Your cart is empty.

Your cart is empty.

PCIe to USB 3.2/USB 3.1 Gen 2 Card 10Gbps 5-Port (3X USB C -2X USB A) PCI Express Expansion Card PC Internal USB Hub for Windows 10/8/7 Linux and MAC OS 10.8.2 Above

Free shipping on orders over $29.99

$36.99

$ 18 .99 $18.99

In Stock

About this item

  • Insert the PCIe USB 3.2/USB 3.1 gen 2 card into the PCI Express (4X) slot, you can upgrade desktop computer to 3x USB C and 2x USB A ports.On this basis, make more devices connected to computer systems,such as external hard drive,printer,scanner,tablet,smart phone,USB VR,game controller,etc
  • SuperSpeed USB 3.2: 2 USB Type-C ports and 2 USB Type-A ports share 10Gbps bandwidth, the bottom USB Type-C port exclusive speed 10Gbps bandwidth. External USB device supports data transfer rates of up to 10Gbps when used on its own. This PCIe card is a must-have for external hard drives and ideal for file transfers. (Note: Actual transfer speeds may be limited by the connected device).
  • Extensive compatibility: The card supports PCI Express X4 ,X8,and X16 slots. USB 3.2 ports are backward compatible with 3.0 and 2.0. The operating system is compatible with Windows 7,8,and 10 (32/64-bit) and Mac OS 10.8.2 or higher. When the PCIe usb card is installed,Win 10,Mac OS and Linux don't need a driver, Windows 7 system must install the drive
  • Intelligent protection: Each interface has independent insurance,with over-current and short-circuit intelligent protection to protect your computer equipment. In addition, a low-power USB device connection doesn't require an external power supply. Easy to install,The card can be powered directly from the PCIe slot on the motherboard
  • What You Get: 1x USB 3.2 PCIE card,1x CD drive,2x installation screws,1x user manual and Provides 1 year of product-care



Product Description

pcie usb card

Introduction:

The PCIe USB 3.2/USB 3.1 Gen 2 card can be connected to the motherboard through a PCI Express (X4) slot, and easily update your old desktop computer to 3 Type C ports and 2 USB 3.2 gen 2 downstream ports. Effectively solve the problem of insufficient Internal USB port on the host.Furthermore ,There will be no loss of connectivity issues like an external usb hub.

Product Advantages:

1. The 5 external USB ports of the PCIE card adopt a stacked layout, which can save the space of the host.

2. Built-in YEELIYA self-powered technology, it is easy to install on the computer, without additional power supply.

3. The USB 3.2 gen 2 port has a speed of 10Gbps bandwidth(2x USB Type-C port and 2x USB Type-A ports share 10Gbps, the remaining 1 USB C port has exclusive use of another 10Gbps ), realizing fast transmission for your USB device; in addition, the PCIe USB card has 3 differently designed USB C ports, supporting type-C devices such as smartphones and tablets for file transfer.

Note: ALT DP, HDMI, VGA display video monitor conversion function is not supported.

Installing and using this PCIE card may require some additional tuition, please download (10053-Use Manual) from the product page (Product Guides and Documentation) for proper installation procedures.

Before making a choice, please read the (NOTE) and (Warm Note) at the end of the page.

pcie usb 3.2 gen 2 card

Safe and Stable

Each USB port is equipped with explosion-proof capacitors and insurance components, with over-current stable voltage function, which is easier to protect your equipment than the other PCIE card.

usb pcie card

Wide Compatibility

Support Windows 10/8/7 / Vista / XP, Linux and Mac OS 10.8.2 (above) operating system, Win 10, Linux and Mac OS 10.8.2 above do not need any driver.

usb 3.2 card

Large-Scale Application

This card has enough USB ports to connect your keyboard, mouse, game controller and USB VR. Get rid of the problem of the computer host internal with fewer USB port, and add unlimited fun to you.

Installation Steps

usb c pcie card

Step 1

Turn off the computer, unplug the power source, and remove the cover of the computer case.

pcie usb card

Step 2

Find the PCIe slot suitable for pcie usb card.

usb 3.2 gen 2 card

Step 3

Insert the card down into the PCI-E slot.

usb 3.0 card

Step 4

Tighten the screws on the side of the bracket with a screwdriver, put the computer cover back on the computer, and then insert the plug into the socket.

Warm Note:

1. Computer host internal need Available PCI Express x4, x8 or x16 slot.

2. System requirements are Windows XP/7/8/10 operating system and Mac OS 10.8.2 above, 4GB DDR RAM or above.

(Doesn't support MSI/Dell PC series Win 11 system.)

3. Windows 7 / XP system needs to install the driver from the attached CD, or download the driver according to the content of the user manual.

4. Select the interface type that matches the PCIE card, e.g. USB 3.1-A, USB-C. Cord specifications require USB version 3.1 Gen 2 to avoid performance impacts due to speed mismatch. The PCIE card USB A port: 5V-0.9A, USB-C port: 5V-3A, make sure to use 5V-0.9A and 5V-3A cord, and correspond to the corresponding interfaces to avoid the wrong cord from being plugged into the wrong port, resulting in insufficient power supply, so that the device can not work properly.

5. USB terminology: USB 3.2 Gen 2x1 was originally called USB 3.1 Gen 2. Since many motherboard factory have not updated their hardware technology in time, most computer programs will display USB 3.1, but it does not affect the speed.

NOTE :

1.Not compatible with the old version of PCI Express X1 slot.

2. The USB expansion card only supports data transmission, not video signal transmission (DP, HDMI monitor) or Such as USB c Hub hdmi/VGA function conversion.

3.Do not install this PCIE card when the computer is turned on.

4.If the card doesn't work, check whether the PCI-E socket on the motherboard is faulty.

5. Also, for USB 3.2 cards to get USB3.2 SuperSpeed +performance, be sure to use PCI-E 3.0 or higher slots for card installation.

6.The card is For standard-size computers only and doesn't apply to low-profile/mini/half-height PC(didn't come with a half-height bracket).

7.The USB device has a limitation on the throughput/performance of data transfer from the expansion card. In addition, do not plug high power cord/USB to HDMI cord into this USB 3.2 card to avoid unnecessary compatibility issues.

Package Contents:

1 * USB 3.2 PCIE Card

2 * Screw

1 * CD Drive

1 *User Manual


Hadi S
2025-09-04 11:02:14
So far, the newly installed product has had no problems and can function well.A quite significant change is in external USB SSD devices where the initial speed of 42 Mb/s becomes around 546 Mb/s
H & D
2025-07-20 15:39:51
On Windows 11 Desktop, it worked fine even if I didn't install the driver. Everything is satisfactory, but there is one disappointing thing. It does not recognize USB speakers or amplifiers.
Lex B.
2025-07-14 18:17:17
Here's the thing, everything was great for a little more than a year. However, this past month, things started to get a little dicey. USB ports would lose power for no reason at all and the computer, with the PSU is stable. I plugged in my USB load tester (not just voltage test unloaded).I found out the ports couldn't deliver USB 3.x power requirements and could barely handle 5 volts at 500 mA maximum (2.5WDC). If I plugged in every other port it could handle the USB 2.0 power requirements. It used to be able to handle USB 3.x power on all powers.Today, as of 3:20 PM CST, the card is now finally dead. I know what the problem is, after looking at the PCB and tested the components via a PCIe riser and an oscilloscope. Several of the passive components specs are too small, they need bigger beefier components. While I could fix this, the manufacture has to know that they effed up.Now, USB 3.x is up to 20 Volts and 5 Amps, that's 100W per port. Now, this is not possible because PCIe slot maximum wattage is 75W and you'd need addition PCIe 8-pin connectors to deliver all the power you'd need. PCIe 6 and 8 pin power is at 12VDC, so the card would need to use a step up transformer to change the power from 12 to 20 VDC and be able to deliver that much juice.So, if you think about it.2 type A4 type CWhich is 6 ports total, max of 20V at 5A aka 100W a port, that 600 Watts total power capability. I have yet to see any USB card or embedded solutions actually have that capability.The way this card is set up by data is to be signal wise compatible with USB 3.2 Gen 1 but not power wise.If you want a sturdy card, pick another card manufacturer.
Mike Smythe
2025-04-27 18:27:36
My Quest2 has a weird issue with USB ports, it seems to burn them out. None of the ports on my mobo will recognize the HMD anymore or charge it. Most other usb2.0 level devices still work fine, but I needed something to use for VR and took the opportunity to upgrade to 3.2.After a couple months I’ve noticed that the HMD isn’t charging like it used to on any of the ports but since each port has its own dc regulation circuitry I’m guessing it’s probably a cable issue… the HMD seems to eat thru cables too, but given how much they get twisted up during gameplay that’s not all that shocking.Anyway, great looking card that has performed well! External NVMe drives are noticeably faster than stock usb3.0, and I’ve been able to crank VR SS to 1.5 to match the native quest resolution and I couldn’t do that before. Solid buy.
Derrick N.
2025-04-26 17:11:19
Easy to install. Just pop off the side cover and then remove the cover plate for the PCI slot in use. Slide it in, then replace screws and fire it up.Haven't checked data transfer rates, but USB-C hub is functional with remote drives and additional HDMI operating simultaneously.Happy with purchase.
Luv2Travel - ask
2025-04-22 20:16:59
I had a problem with this item but customer service was helpful, they wanted to try first to send a replacement, but that also did not work, so then the sent a refund. so I can say this company offers good service and for that I offer that 5 stars. For some reason the first time I tried to leave a review it did not work, so a few weeks later I realize and I am doing again.
BobD
2025-04-15 11:18:25
The card worked for connecting an Oculus Quest 2 via USBC to a Gigabyte motherboard. The motherboard has built-in headers for front panel USBC, but the case I installed it in didn’t. This card was a less expensive solution than buying a new case to use the on-board USBC. It was easy to install and Windows 10 loaded the correct drivers automatically. The only potential negative is that the card doesn’t have a power connector and charging over the USBC port is very slow. Other cards I looked at did have power connectors, which might improve charging performance. But it worked for what I needed it for and was simple to install, so I’m happy with the purchase.
drM
2025-01-08 10:29:38
Worked good for a while as some has already stated. One went dead within a couple of months, the second one is now dead after a year and half.
hukof10th
2024-12-21 18:34:24
I initially bought https://www.amazon.ca/gp/product/B08GC6VFF2/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 but I thought maybe I should go all the way up and thus I bought this one to have working usb 3.2 gen 2.However, after plugging this card into pcie 16x port, this card is not seen after boot up to windows 10. Since this port runs at 8x speed, I switched this card to another 16x port running at 16x speed, and this time, my computer doesn't even boot to windows anymore.Not sure what happens, but since it doesn't work, gotta return it.
Cliente de
2024-12-17 16:24:36
Necesito ayuda por qué no puedo hacer que reconozca los drives
Nick T.
2024-12-01 18:42:13
It did not work with either one of my two computers. I get post error 99 at boot. Shame, because it sounded like a good product. Most likely it should have had extra power plug like some other products have. I decided not to return it because it would have cost me for a shipment to US.
Recommended Products

$22.99

$ 10 .99 $10.99

4.9
Select Option