Your cart is empty.
Your cart is empty.The Performance Tool W87020 Power Steering Pump/Alternator Puller Removes power steering and alternator pulleys on selected applications of Chrysler, Ford, GM, and Volkswagen with hub sizes of 1 1/8, 1 1/4, 1 5/16 & 1 3/8 inch, Instructions on back of package. Use Performance Tool pulley installer (W87021) to reinstall pulleys on Ford vehicles.
Marcus Barnett
2025-08-27 15:11:13
Does exactly what it's supposed to.
warfacegod
2025-08-14 17:23:36
The tool itself is fine. Does what it's supposed to do. Worked quite well on my '01 GMC Jimmy 4.3L 4WD. Although it did take me nearly 15 minutes, that's not really the tool's fault.Here's the scoop on the instructions. Set the tool up as instructed. Step .05 Says "Turn Center Screw to remove pulley". ...Right. It's not that simple. With a few combo wrenches, like most folks would start with, you're not strong enough to do the entire job. You will need LEVERAGE. That means a 1/2" drive socket wrench with a 5/8" impact grade deep socket and a length of strong pipe to go on the end of the wrench. At first, I used a 3/8" drive socket wrench and came dangerously close to breaking it.Also, be forewarned that the tool comes out of the package covered in some kind of oil. It's obviously there to prevent rust so I'm not taking a star for that as it's a good idea. Have a rag on hand, when you open it up.
Ron
2025-07-09 15:03:26
Basically this tool is a piece of junk.
Tim W.
2025-07-08 18:50:45
Well made and preformed flawlesslyflawlessly. Is exactly as its described.
David
2025-06-05 11:12:18
The band that hold every thing together was to lose so I had to use a hose clamp to make it work. Other then that I got the job done
PDS
2025-05-08 11:24:17
I gave it a 4 star rating based on build quality and job performance. The trick is to get the band over the two half pieces while applying slight pressure to the screw. It took a couple trys but worked fairly well.I would recommend this tool for anyone doing a power steering pump pulley, but don't forget about the install tool. This tool will only REMOVE the pulley, you will need another tool to install.
Rablwo
2025-04-26 16:23:09
It is great to help you get a pulley off. However, when you need to put the pulley back on, it is no help. There are others that will do both.
BigW
2025-03-16 11:13:12
Saved my bacon!
Martin
2024-12-12 12:46:39
Removed pulley as intended.
sicam84
2024-11-27 15:20:36
Absolute cheap garbage. From directly out of the package the 2 reversible sized half moon pieces were not even square. Very first time I tried to use it it would not line up or pull off the pulley as the pieces were cockeyed right from brand new. My co-worker has the EXACT same puller but made by OTC and I use his all the time which is why I bought this one for myself. Wish I had of spent the extra $30 and gone with the better quality brand. Had to throw this one away along with the money I paid for it. Very disappointed and will never buy another "Performance Tool" product.
Customer
2024-11-16 09:53:16
Unit worked very well.A little difficult to put on and I had to grind the back side with a side grinder to allow it to fit tight enough to the pully so the sleeve could aver the two halfs.
Recommended Products
$1,880.80
$ 99 .00 $99.00