Your cart is empty.
Your cart is empty.Flat Roof Universe PVC RV Kit provides you with all the components you need to install your new camper roof. Each Kit has been broken down to the correct amount of accessories by the length of roof you choose.
Fast Scooters
2025-06-16 17:13:46
If your not sure what's the best product to use well I'll help you out as I did a ton of research and I'm glad I used this kit and product. I found other kits for more and for less and ones with different material and ones without the butyl and lapping sealer but I'm glad I bought this. First off the material is very heavy duty not just a thin piece like factory tuff and other stuff I found. 2nd the butyl I had and thought I didn't need,,wrong,,I'm glad I got the kit there was 2 huge rolls if butyl that was not a foam stick or cheap stuff it was a "much" better quality than the stuff I had already bought so I used it and you'll see for yourself it's hi end stuff. 3rd is I had plenty if glue and was worried from a review I saw so I called the company and the guy assured me there's plenty and gave me tips and was a really nice guy to deal with. I did get 2 gallons and my roof is 30ft and 8'4 wide and I had about 3/4 gallon left, a half of a roll of butyl and 1 tube of lapping sealer left. 4th was I was worried about it being folded to ship and from what I read you need to unroll right when you get it, I did that but my friend bailed on me for a week so I rolled it back up and stored it in my garage and was worried but no, it rolled out nice and I used to install flooring and vinyl in houses and I'm convinced it's because it's good stuff..it don't rip or crease at anytime because it's good stuff. I put it over new osb wood and the supplier said it's important to let it turn clear from white before you roll out and from what I read that expels the gasses and let's it bond both pieces and you do not have to put it on the material you simply roll the glue onto the wood and it's white and turns clear after about 10 minutes or so, wait and don't get impatient! It rolled over the edge nicely and the directions were great and I'd post pics but I forgot to get some and will try to get some later if I remember to (getting old,lol).. I am very particular about things and if your reading this you can thank me because this is your best choice 100%!
Braydon D.
2025-05-01 13:47:26
Worked well. Not flexible like some other products, but felt very durable.Came with plenty of glue, but I wish it came with self leveling lap sealant. The sealant given was NOT self leveling, so make sure to get some if you're going to replace an RV roof with this.
Meadow Thorne
2025-04-22 21:10:05
The media could not be loaded.
Sheila
2025-01-24 11:54:59
Our roof project was a pain getting up to the rubber roof application. But once we started on the rubber it was a breeze!!!! We had 4 people helping and it worked out perfectly! We rolled the glue onto both sides and let it dry until clear as the instructions say and then slowly rolled it onto 1/2 of our camper and then pushed out all the bubbles with a broom and also our hands. Then we did the other half in the same steps......Honestly the best part was sliding around on top on my belly and just pulling the bubbles with my hands towards the ends and the other guys would straighten them out! Legging and a workout top were perfect and my husband would just pull me back to the ends by my ankels!! 🤣 We are very happy with it and saved a lot of money doing it ourselves for sure. Would definitely recommend. But read the instructions and don't try to do it quickly. Take your time and research
Byron Markwell
2024-12-29 10:29:24
The material seems to be of quality and the package came with the caulking, glue and butyl tape. The membrane came shipped folded and therefore left wrinkles in the material. we unfolded the product and rolled it up immediately from receiving it. We left the rolled membrane sitting in our living room for over a month. Just this last weekend we had the top of the Class C Jayco Greyhawk prepped with a completely new plywood roof. We followed the manufactures recommended instructions for installation and applied the adhesive and installed the membrane. To my surprise the glue cured relatively fast. We installed this material in the direct sunlight with around 78 degree weather. It took maybe 40 minutes to roll out the adhesive and unroll the membrane, and then we worked out the air bubbles. I also notice while installing the product that the membrane had abrasions on it which I believe were a direct result of the folding while it was shipped. At the end I seemed pretty dissatisfied with the product. The only issue with this product in the end was the wrinkles caused by the product being folded and shipped in a box. I would not recommend buying from this manufacturer in the future.
Carlton Sartoris
2024-12-07 11:46:43
I replaced my whole roof myself 5 months ago it’s a lot of work but so far has been leak free. Material is really thick and doesn’t stretch much. Will ship folded so recommend laying out in the sun before hand to stretch and flatten it out. Then rolled it up on a piece of pipe to carry it on the roof. It’s heavy will need 2 people. The glue is very sticky and they provide more than enough. Did a whole 35’ 5th wheel no problem and have used the extra glue for other projects.
Recommended Products