Your cart is empty.
Your cart is empty.Use for tuck-pointing, repairing, and sealing mortar joints and cracks in brick and block walls. Sanded acrylic formula blends in with the color and texture of surrounding mortar and provides excellent adhesion to brick, block, and concrete surfaces. Apply no thicker than 3/8" In 1 application. Allow 24 hours before painting. Use latex paints only.
Arkteryx
2025-09-03 10:28:56
I bought this to fill drill holes in the brick over my mantle left by previous owner. This mortar repair was the smallest size I could find (I wish it were smaller still but this worked fine). I didn’t want to have to buy a caulk gun and have an extra tool that I never use so this tube was perfect and inexpensive so I can throw away the extra and not feel too bad about it.
Stephen R. Hardison
2025-08-27 10:12:42
Easy to use! Matches the existing mortar well. From a distance it’s hard to see the difference. Too early to tell the durability yet.
Robert
2025-08-10 17:46:40
I changed my doorbell and used the to patch the holes in the mortar from the old one. Works great! Easy to apply and shape into a seamless finish to your existing mortar. I haven’t been through a winter yet, but it held up to summer sun and fall rain just fine.I would like to see the manufacturer put this out in a few more colors for better blending, but ultimately a very good product for a DIY patch.
Coleplay
2025-07-28 15:06:33
I got this to fill in minor cracks in the mortar between our outside brick column. Easy to apply and dried well. It's s small nozzle so it works for thin and small cracks.
Jeannette T.
2025-07-26 11:20:57
This product seems fine but I was negatively surprised by the bright grey color after the product dried. Does not blend with my brick or mortar at all on my 1930 house
Customer
2025-07-22 16:09:32
I used this in the cracks of the mortar between the bricks works really well and easy to use
ffnf63
2025-07-14 14:31:13
Works well. I’d buy again.
Jay Rainaldi
2025-05-31 13:49:23
I will use this outside but, for now, I used it to fill some holes in the mortar on the fireplace. It is a little lighter in color than the existing mortar (which is now more than 50 years old) but not super noticeable. It filled and covered well.
Mike Duma
2025-05-25 12:16:55
We had cracks in our mortar and this worked perfectly to help seal the cracks.
mr stephen warner
2025-05-07 13:02:10
Great item fast delivery
A.Redman
2025-04-13 17:27:17
Looks grey to me (like fresh cement), rather than the 'sandy' beige (like weathered mortar) I was after. The nozzle kept blocking until I cut a few mm off the nozzle to enlarge the hole, but then flowed well. It hardened well too and the texture's good.(My home-made version was perfect though: powdered some old mortar (drilled it) and mixed with PVA and a few drops of water, applied with a spatula).
Bwod
2025-02-09 13:51:02
The material is actually made from acrylic. It looks like cement (mortar) and feels gritty like cement, but it is sticky and gooey. I put some in the cracks between bricks. The old mortar was crumbling and falling out after 74 years. I thought I would be able to apply it with a tool, but it was very messy. Finally I used a finger to smooth it out, but it was far from perfect. Easier than buying actual cement. Good for small jobs. May not match your mortar in terms of colour. It's quite dark in colour. I'm still waiting for it to harden after 2 full days. Eventually I'll paint over it so hopefully no one will notice the flaws. An o.k. product for small repairs.
wendy thomas
2025-01-29 12:35:51
Very use able but a little hard to get the cement out of tube but nevertheless once out very easy to fill gaps.
Recommended Products
