Shopping Cart

Your cart is empty.

Your cart is empty.

Rit All-Purpose Powder Dye, Black (42809)

Free shipping on orders over $29.99

$36.50

$ 16 .99 $16.99

In Stock

1.Color:Black


2.:1 Count (pack Of 1)


About this item

  • This package contains one box of dye
  • Enough for approximately 1 lb dry weight or 3 yards of medium weight fabric
  • Conforms to ASTM D4236; Made in USA


This versatile, easy-to-use and non-toxic powder dye is ready to deliver vibrant color to almost any type of fabric or fabric blend, including cotton, linen, silk, wool, rayon, ramie or nylon. Perfect for rejuvenating faded clothing, changing the color of apparel, shoes or accessories, coordinating home décor, hiding laundry accidents and so much more. Looking to create something unique? Rit has been tie-dyeing clothing and décor for decades. It’s also the perfect tool to create an ice dyed, dip dyed, marbled or shibori pattern. It can even dye wood, wicker, paper and cork. Whether you are rescuing faded jeans, creating a costume or decorating for a party, all you need is a washing machine, plastic container or stainless steel sink to get started. With 500+ color recipes available on the Rit's website, it is almost certain you’ll find the right color for your needs.


BRtF
2025-07-31 16:34:46
*Jan. 17, 2017: They're starting to slightly fade, but only very slightly. Certainly not any more than a newly purchased pair.*Apr. 13, 2016: Still no issues with fading, they still look good.*Jan. 6, 2016: They still look good. I'll stress to wash them separately the first 3-5 times to avoid staining other clothes.I like how the jeans and shirts I dyed turned out. I should have taken a before picture, but I didn't plan on writing a review until after I finished. The jeans were very faded, almost white at the knees and some permanent dirt stains. I followed the instructions for the most part, but here's what I did, which allowed me to not have to use a cup of salt for each pair of jeans: 3 gallons of 150°F water in a bucket, mixed one cup of salt, 1 packet of navy blue and 1/2 packet of black. The instructions specify one packet per pound of fabric, since these jeans weigh 1.5 pounds, that's right on spec.I submerged the first pair of jeans in hot clean water first before placing into the dye solution as per Rit's instructions, but I didn't do that for the three subsequent pairs, I can't see any difference in the end result. I left the jeans in the dye for about 30 minutes each, mixing with gloved hands and sticks about every 10 minutes or so. Rit's instructions say to stir constantly for the first 20 minutes then occasionally for 10 minutes. I didn't do that, but the results were still very uniform. After I removed the first pair, I added another packet of navy blue and 1/2 packet of black and did the same for the third pair. I was worried that adding more dye to the existing dye not absorbed in the first pair of jeans would cause the second and third pair to be way darker, but that was not the case. For the fourth pair, I added nothing and the jeans came out very slightly lighter than the first three pairs. The fourth pair was also lined with flannel and weighed more.Consecutively, I dyed five faded black shirts (2.5 lbs). I used a bottle of liquid black combined with a 1/2 packet of black and dyed all five shirts at the same time with great results. The bottle of liquid is good for 2 lbs. of fabric.I find after reading others’ reviews that it’s important to keep the temperature of the solution to at least 140 degrees. I achieved that with my sous vide cooker in between pairs (immersed heating element with a circulator). Other methods I suggest would be a 4-5 gallon stock pot and a thermometer, or topping off with boiling water (which will dilute the salt and the dye, so may need to add more).After everything was dyed, I hung everything up outside for about 1/2 hour, then plunged the jeans then the shirts each into a 6 gallon bucket of clean water and rang them out. I then ran the jeans then shirts separately in a short cold water washing machine cycle and hung everything to dry. After wearing, I plan to put both the shirts and the jeans into their own laundry pile together and wash them all again by themselves to ensure the color has set.I forgot to add a squirt of dishwashing soap to the dye solution as Rit suggests. I imagine that would have further ensured penetration into the fabric by reducing the surface tension of the solution.Use rubber gloves. I did and I found out that one finger had a very small hole in it because that finger is now blue. I figured the two plastic buckets I used would be forever stained blue, but they weren’t.I’ll update in the future to report on how everything holds up to washing and wear.All in all, this represents over $300 of clothing when new, feels pretty good to be able to restore everything for about $15 worth of dye/salt and two hours of time (even less because I did other stuff while soaking and ignoring the 20 minute agitation)!
James Jessop
2025-07-23 16:20:45
I was a little skeptical; the color looked too dark, and I was afraid it would do tie-dye. However, it is the perfect product when it comes to dyeing.
William S
2025-07-10 17:06:58
I 've used RIT DYE since I was a kid, for about a hundred years. It does work well and the colors hold if used as instructed (being a guy, I don't remember if I have ever completely read the instructions, but it's pretty simple minded). The color may not last as long as the original, but it's feasible to repeat in a reasonable period. And it will dye anything within a 15 foot radius if not performed in a controlled procedure.I find outdoors is a safer area. I start with clearing a 15 radius of anything I cant afford to replace or have cleaned or reDye to its original color, or if it will involve a Vet. I wear clothing of similar or insignificant color. Being a veteran Pro, I've eliminated the goggles, gloves, respirator, knee pads and steel toe boots. What makes it easy and way less messy, I use one of those notorious 'fire bomb' outside deep-fry Turkey Fryers and a 5 gallon plastic bucket to rinse and set the color. I bring about 4 gallons of water almost to a boil, then lower my Pants into the water, let the temp rise while I mix the Dye-Salt solution. I use a wooden hoe handle to mix and lift out the hot/wet pants - into a 5 gallon bucket with the turkey basket in it. This leaves about 3 gallons of water that I then add the solution and mix a bit. While the pants are still pretty hot and excess water dripped off, I carefully lift and lower them into the Dye mix. Then it's a matter of poking and swishing them carefully around to pick up the Dye in every part. About the time your arms give out, they should be done. Turn off the burner, let it simmer.I add a few gallons of warm water to the 5 gallon plastic bucket (remove the turkey basket). Then lift, let them drip off excess before lowering them into the warm clean water. After lightly moving them around to lower the temperature, I use a water hose to add another gallon. Then pour out the water and submerge them in cold tap water. Hang them up to dry. Wash them with other jeans, then into the dryer.works for me....... and no animals were harmed during the process. And a new matching hoe handle bonus.(sorry if any sarcasm may have offended you, but it was directed toward those unfortunately stuck on Easter Egg dyeing)
BeatrixMcG
2025-06-27 16:15:12
This is less fuchsia and more like bubblegum pink. I used the whole box on two items of white clothing, and they both came out bubblegum pink. I thought fuchsia meant it would be darker pink. Still, it worked well, this brand is always good.
Roxy
2025-06-06 14:51:38
This would have come out darker but it was my first go at dyeing & after boiling the water with a cup of salt , then after boiling I then add the dye before adding to a nice sized plastic bucket / drawer I got from Walmart some time ago I was concerned there would not be enough water to cover it so I added additional water to the dyed water from the pot on the stove. I do not recommend the washing machine bc you don’t have the control like you do dying it in the bucket not to mention it’s up to the individual as to how long you want to keep it in there & stirring once in awhile. I am going to post other colors I did as well & the colors came out very rich . —-Also , before dying the fabric I made sure to wash & dry it & then when I was ready to die the fabric I wet each thoroughly with hot water , rung them out and THEN I added the dyed water . Couldn’t be happier !! —-I also must mention the fabric that looks brown? I am confused about even though I do like the color but it was suppose to be GREY! The second lighter brown ( again that was suppose to be grey ) was from the same dyed water that was left over and that’s why it’s so much lighter .—-SUPER EASY TO USE & absolutely worth $$ spent when comparing how I plan to use my dyed fabrics . So far I’ve used 6 different colors . I even died some white lace LOLOL. I’m on a roll cuz I’m so in love with the Richness of the colors . - Coral , grays , blues
7723doug
2025-06-05 13:06:42
Worked great even for a man with no dying experience.I dyed towels in the sink.Just follow the directions
Customer
2025-04-21 10:52:16
👍
PHILIPPE
2025-03-03 18:47:07
Il est facile d'utilisation et teint bien le tissus mais c'est vrai que ça ne correspond pas à la couleur du Pantone ... beaucoup plus bleu turquoise alors que je voulais un vert sauge...
L.B
2025-02-22 17:00:03
Nicht Zufrieden
kMaSterGirl
2025-02-12 11:03:12
While its advertised to be Multi-Purpose I tried to dye a jacket, which hat motor oil stains, to blue I came to the realisation after recieving it that it wasnt all purpouse, it doesnt work on polyester. Yeah so I dyed it anyway and it came a light purple (the jacket was white originally) and the stains became darker. Overall a bit weird it doesnt specify it in the description that it doesnt work on some materials but hey thats life.