Your cart is empty.
Your cart is empty.Product Description
Mahua Delta RP19804 Replacement Cartridge
Please Note:
- Not fit 13/14 etc
- Suitable for Monitor valves selected before 2007, not for MultiChoice Universal Valves 2007 to present.
- Please check the part number before ordering, thanks!
Features:
- High-quality plastic materials can last longer (Rugged brass & plastic connections)
- The water temperature can be controlled within a safe range
- Prevent leaks, save you water, money and energy
- Easy to install, convenient and fast, saving you time
- Suitable for monitoring faucets 1300 and 1400 series on single-lever bath/shower faucets. Suitable for selection monitoring valves from 1993 to 2007, not suitable for the new multi-selection general-purpose valves from 2007 to present.
Installation Steps:
- Shut off the water supply to the tub/shower.
- Remove the knob center cap&knob, slide off the outside sleeve.
- Remove the brass bonnet .（try by hand firstor gently use channel-lock pliers）
- Remove the old cartridge, clean the sediment and debris in the pipeline
- Insert the new cartridge, thread and tighten the brass bonnet (If you remove the backing plate, clean the old caulk away and clean all parts)
- Slide the outer sleeve back on, replace the backing plate and install it in place.
- Replace the knob and install in place, and replace the center cap.
Package Includes:
- RP19804 shower cartridge x 1
- Black gasket x 2
RP19804 1300/1400 series replacement ink cartridges are used to repair leaking faucets. Replacing ink cartridges for leaking faucets is the most convenient and cost-effective option.
Mitch Beavers
2025-08-22 14:18:42
Fits and works as advertised.
Jim
2025-08-20 14:01:00
Should have listened to the few. This item is defective. The washers on the blue part are cheap and damage easily when inserted. They did provide an extra pair of the cheap washers, however, once installed it leaks more than the older part. When removed I inpected washers and seemed ok but still leaks. Had to put older part back on, which drips once every 30 secs comparted to every sec for this item. I'm out ~$20. DO NOT BUY THIS ITEM! You've been warned.
julio m.
2025-08-04 13:17:43
Not even my local home depot was able to help me. This product had the best description and I was able to figure out quickly this was the right part I was looking for. This part was easy to install and fixed my water leaking issue and it was so much easier to adjust the hot and cold water than the old part.
nedd
2025-07-25 18:49:37
I like this product because it is an exact fit replacement part and the cost is reasonable. I did use some silicon grease in the repair. Over all, I am very pleased to have been able to repair the drip and avoid an expensive plumber bill.
D-Zach
2025-07-14 16:35:44
The price is appealing, but this will leak just like the one you are replacing. Save your money and time and pay the extra for the Delta original manufacturer version which works like a charm.
krystal mutter
2025-07-03 14:23:51
When you first install the fixture, it will not get that hot. You have to pull out the spring loadedinsert and turn it counterclockwise to allow the hot side to fully engage.
Lloyd
2025-05-29 14:46:47
Installed easily. Fit perfectly
Customer
2025-05-09 13:24:05
all ok
JORGE SALDANA
2025-04-29 11:05:36
Era precisamente la pieza que buscaba por la antigüedad de mi bañera pensé que estaba descontinuada pero funcionó a la perfección
bonnie pigeon
2025-03-13 16:58:13
Item fixed the problem. Easy to install
DL8226
2024-12-18 12:49:25
Not sure about quality of the product. It doesn’t fit. The tip part is slightly longer comparing to the original. So you can’t close the final assembly tightly. See attached picture. I do not recommend buying. Returning!
Recommended Products